The 1947 - Present Chevrolet & GMC Truck Message Board Network







Register or Log In To remove these advertisements.

Go Back   The 1947 - Present Chevrolet & GMC Truck Message Board Network > General Truck Forums > All 4x4 Tech & Off Roading

Web 67-72chevytrucks.com


Reply
 
Thread Tools Display Modes
Old 02-11-2003, 02:05 PM   #1
smithjp1
Registered User
 
smithjp1's Avatar
 
Join Date: Dec 2002
Location: Katy, Texas
Posts: 116
Suspension Lift 68 swb 4x4???

I need to know if I add a 3 or 4 inch suspension lift to my truck, what will I need. I was just thinking of adding 3 inch lift blocks to the rear and having the Front Spings re-arced with a small lift, to fit 33 inch Tires.

Do I need to extend my drive shaft? need longer shocks, etc..?

Anyone with experience help, gime some advise.

Thanks.
__________________
1968 4x4 swb
smithjp1 is offline   Reply With Quote
Old 02-11-2003, 02:22 PM   #2
Mudder
Registered User
 
Mudder's Avatar
 
Join Date: Feb 2001
Location: East Central, MO
Posts: 11,336
Driveshaft should be ok. Shocks will have to be longer. Not for sure if rearching is the best way to go. I would recomend a 4 " from tuff country. You know I bet you could fit 33's with a 2 1/2".

Last edited by Mudder; 02-11-2003 at 02:25 PM.
Mudder is offline   Reply With Quote
Old 02-11-2003, 05:55 PM   #3
Pont
I need another Barley Pop
 
Pont's Avatar
 
Join Date: Feb 2001
Location: Grants Pass, OR
Posts: 1,629
Like Mudder67 said, you should be fine on your driveshaft lengths. You will definitely need longer shocks or you will reach the extension limits under articulation. You should also get longer front brake hoses. The rear should be long enough for 3 or 4 inches of lift. I also wouldn't re-arch the front springs. I think new front springs can be purchased for around $300, maybe a little more.

I put an 8" suspension lift on my 67 (same as 68) so if you have any further questions, don't hesitate to email me or send me a private message.

Rob Pont
pont1@rvi.net
__________________
67 Short Fleet 4x4

04 Honda CRF450R

89 Toyota 4-Runner

34 Ford 2 door sedan - Long term project


----------------------------------------------
There is a very fine line between "hobby" and "mental illness"
Pont is offline   Reply With Quote
Old 02-11-2003, 06:43 PM   #4
smithjp1
Registered User
 
smithjp1's Avatar
 
Join Date: Dec 2002
Location: Katy, Texas
Posts: 116
Why would you suggest not to ReArc the leaf spings? is it feasable to do the rear, I thought that the front leaf spings on 67-68 are different lengths than other years,

Where do you buy them from?

I really don't want to relocate my hangers or buy new ones.

Thanks.
__________________
1968 4x4 swb
smithjp1 is offline   Reply With Quote
Old 02-11-2003, 07:37 PM   #5
Pont
I need another Barley Pop
 
Pont's Avatar
 
Join Date: Feb 2001
Location: Grants Pass, OR
Posts: 1,629
Front springs are the same as other years, the rears are different on the 67-68's.

You should be able to buy the front springs no problem. Rancho, Tuff Country, Superlift, Skyjacker, Rough Country, Trail Master. These should be readily available.
__________________
67 Short Fleet 4x4

04 Honda CRF450R

89 Toyota 4-Runner

34 Ford 2 door sedan - Long term project


----------------------------------------------
There is a very fine line between "hobby" and "mental illness"
Pont is offline   Reply With Quote
Reply

Bookmarks


Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -4. The time now is 07:38 PM.


Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Copyright 1997-2022 67-72chevytrucks.com