|
05-08-2010, 03:47 PM
|
#1 |
|
Future TOTM Winner
Join Date: Aug 2006
Location: Bulverde, TX
Posts: 2,692
|
Dana 44 rear
I had a 68 swb step side that was originally an inline 6 with a 3 speed column shift back in high school. I had swapped it over to a 350/th350 but the rear end was stock. I didn't know much back then about axles but I know this had 3.90s from the factory and I put in a set of 3.07s. This would mean it was a Dana 44 rear, correct? My question is what years and drivetrains was the Dana 44 put in. I have wondered this for years now and never have been able to get a strait answer. Here are a couple pics just for fun.
__________________
72 Chevy CST K5 HIGHLANDER BLAZER Getting a 6.0,NV4500,NP205,14BFF (Currently laying all over the place in little pieces) 72 Chevy swb step-side "LS" 6.0 Here's a build thread of sorts 2002 HD2500 Crew Cab, 8.1L Allison 4x4 Daily Driver Check it out www.lsdyno.com |
|
|
|
05-08-2010, 04:17 PM
|
#2 |
|
Project Junkie! Fishing Poor!!
 
Join Date: Dec 1999
Location: Olympia,Wa. 98512
Posts: 10,766
|
Re: Dana 44 rear
The only ones that I have found with the Dana 44 rears are the GMCs, all of the Chevies had 12 bolts except the big block 1/2 tons had Dana 60s. WES
__________________
On-line catolog Classic Heartbeat Pickup Parts WEHEPP@comcast.net Call us Toll Free (888) 338-2502 Like Us on Facebook No appointment necessary. 72 BB Chevy Custom Deluxe / Custom Camper 67 I-6 (Soon to be 5.7 LS1) Panel 68 BB Chevy Short Bed 72 6.0 LQ9 Short Bed Chevy 4X4 Olympia's fastest growing truck parts supplier. Olympia's home for Wayward Chevys Last edited by Classic Heartbeat; 05-08-2010 at 04:18 PM. |
|
|
|
|
05-08-2010, 04:19 PM
|
#3 |
|
Future TOTM Winner
Join Date: Aug 2006
Location: Bulverde, TX
Posts: 2,692
|
Re: Dana 44 rear
Well...I'm positive it had 3.90s originally and then I put in 3.07s (NOT 12 bolt 3.08s) so what axle would that be? I am also pretty sure this was the original axle to the truck.
__________________
72 Chevy CST K5 HIGHLANDER BLAZER Getting a 6.0,NV4500,NP205,14BFF (Currently laying all over the place in little pieces) 72 Chevy swb step-side "LS" 6.0 Here's a build thread of sorts 2002 HD2500 Crew Cab, 8.1L Allison 4x4 Daily Driver Check it out www.lsdyno.com Last edited by Critter; 05-09-2010 at 03:37 PM. |
|
|
|
|
05-08-2010, 05:04 PM
|
#4 |
|
member #16
 
Join Date: Dec 1999
Location: Yuba City Ca.
Posts: 3,618
|
Re: Dana 44 rear
The truck 12 bolts are 3:07.1 Alot of people call them 3:08.1
__________________
john http://67-72chevytrucks.com/vboard/showgroups.php board vendors  http://www.flickr.com/photos/1745471...7602865984234/ |
|
|
|
|
05-08-2010, 05:14 PM
|
#5 | |
|
just can't cover up my redneck
Join Date: May 2004
Location: Columbus OH
Posts: 11,414
|
Re: Dana 44 rear
Just post a picture of the cover
. . . . . . . . . . . Got to buy 5 copies for my mother.....(I couldn't resisit)
__________________
You can review the site's rules here. Quote:
Bad planning on your part does not necessarily constitute an instant emergency on my part.... The great thing about being a pessimist is that you are either pleasantly surprised or right. 
|
|
|
|
|
|
05-08-2010, 07:03 PM
|
#6 | |
|
Future TOTM Winner
Join Date: Aug 2006
Location: Bulverde, TX
Posts: 2,692
|
Re: Dana 44 rear
Quote:
__________________
72 Chevy CST K5 HIGHLANDER BLAZER Getting a 6.0,NV4500,NP205,14BFF (Currently laying all over the place in little pieces) 72 Chevy swb step-side "LS" 6.0 Here's a build thread of sorts 2002 HD2500 Crew Cab, 8.1L Allison 4x4 Daily Driver Check it out www.lsdyno.com Last edited by Critter; 05-08-2010 at 07:04 PM. |
|
|
|
|
|
05-08-2010, 07:49 PM
|
#7 |
|
Registered User
 
Join Date: Aug 2001
Location: SOMERSET KY.
Posts: 6,425
|
Re: Dana 44 rear
CALM DOWN CRITTER.. NO ONE IS CALLING YOU DUMB. IF THIS HAS BEEN BOTHERING YOU FOR 13 YEARS, JUST CHILL A FEW MINUTES.
SOMEONE WILL COME UP WITH AN ANSWER THATS SATIFACTORY TO YOU SOONER OR LATER. JOHN
__________________
junkyardjohn 69 1 TON TOW TRUCK // 84 4WD CUCV BLAZER// 85 1 TON 4WD STAKE TRUCK// 86 M1031 5/4 TON 4WD CUCV// ALOT OF OLD TRUCKS FOR ONE OLD MAN TO DRIVE. THERES ROOM FOR ALL OF GODS CREATURES RIGHT NEXT TO MY MASHED POTATOES//LIFE MEMBER OF P.E.T.A (PEOPLE EATING TASTY ANIMALS) DON'T RENT U-HAUL ALWAYS TELL THE TRUTH IT WILL AMAZE PART OF THE PEOPLE & ASTONISH THE REST |
|
|
|
|
05-09-2010, 10:16 AM
|
#8 | ||
|
just can't cover up my redneck
Join Date: May 2004
Location: Columbus OH
Posts: 11,414
|
Re: Dana 44 rear
Quote:
I didn't expect everyone to "get" the Dr. Hook joke, but that wasn't even the part you quoted? I don't really understand the reaction? You directly stated that you "didn't know"(it has been bothering you for years) and then backed it up by "guessing" what axle it had by what gears you put in it? There are several different rear ends that could have been under a '68 model truck. Some of those would be eliminated by the "short bed" and the "I6" but there are still a couple of possibilities. A simple "picture of the cover" eliminates all doubt. I only said cover because there have been posts here asking that same question and they post a picture of some casting numbers or tube stamping numbers....when a simple picture of the cover......
__________________
You can review the site's rules here. Quote:
Bad planning on your part does not necessarily constitute an instant emergency on my part.... The great thing about being a pessimist is that you are either pleasantly surprised or right.
Last edited by LONGHAIR; 05-09-2010 at 10:21 AM. |
||
|
|
|
|
05-09-2010, 12:09 PM
|
#9 | ||
|
Future TOTM Winner
Join Date: Aug 2006
Location: Bulverde, TX
Posts: 2,692
|
Re: Dana 44 rear
Quote:
Quote:
Oh, and no I didn't get the Dr. Hook joke, but thats ok. I make A LOT of jokes on here that nobody gets.
__________________
72 Chevy CST K5 HIGHLANDER BLAZER Getting a 6.0,NV4500,NP205,14BFF (Currently laying all over the place in little pieces) 72 Chevy swb step-side "LS" 6.0 Here's a build thread of sorts 2002 HD2500 Crew Cab, 8.1L Allison 4x4 Daily Driver Check it out www.lsdyno.com |
||
|
|
|
|
05-09-2010, 12:31 PM
|
#10 |
|
72 Chevelle Club
Join Date: Jun 2007
Location: Newton , Iowa
Posts: 2,052
|
Re: Dana 44 rear
My 68 has a Leaf spring dana 44 in it out of a 67 GMC and it has 3.07 gears in it . I hope this helps ya out ..
__________________
I Have The Right To Remain Silent,But Lack The Ability 1972 Chevelle ... Mine 2006 Trailblazer... Hers 2002 Buick century ... Kids 2002 K1500 Z-71 EXT CAB ... Daily Driver 2005 Rockwood Roo ... For Camping 1974 Harley-Davidson XLH Sportster 84'' stroker |
|
|
|
 |
| Bookmarks |
|
|
Linear Mode
