IN Misc. 72 Chevy C20 Parts, Cargo light, AM Radio, Custom Camper Emblems, More - The 1947 - Present Chevrolet & GMC Truck Message Board Network

**Todd68Chevy** · 05-13-2010, 08:57 PM

As I have time I am parting out and selling off the parts I do not need from a 1972 Chevy C20 Custom Camper Big Block truck. This is some of the parts that I have off at this time.

1. AM Radio with speaker and bracket: I do not know if it works, chrome does have some pitting. SOLD

2. Cargo light with switch and wiring: The chrome is pitted but the lense looks good with slight cracks, wiring runs to the connectors by the fuse box, the light worked when I powered it up but the bulb had to be pushed in- might have incorrect bulb ---SOLD

3. Custom Camper Emblems: some pitting, 2 emblems have 1 stud broken on each and 2 emblems have some overspray paint on them. SOLD

4. Wiring harness for the dual fuel tank gauge switch on the dash: includes the connector for the switch, connector for the inside sender, connector for gauge wire, firewall pass thru plug and some wire running to the rear sender SOLD

5. Gas pedal assy. with kick down switch and cable from a big block/ turbo 400, also has the wiring harness for the kick down switch. SOLD

6. Cig. Lighter, housing and trim: used, looks good but working condition unknown SOLD

7: Parking brake pedal assy.: pedal looks like good used condition but the locking paw does not want to stay engaged, I think a spring might be bad but I am not sure what should make it tight $15.00 shipped to 48 states

Ask all questions, post to the thread before sending private message, I will be happy to get pictures of anything and answer any questions. I do accept PayPal for no extra charge or Money order as payment. Thanks for looking, Todd

**Todd68Chevy** · 05-13-2010, 09:02 PM

More pictures

**Todd68Chevy** · 05-13-2010, 09:08 PM

More pictures

**w314speed** · 05-13-2010, 09:11 PM

interested in the auxiliary fuel wiring harneses! does it include the dash mounted switch for the fuel guage control? pics please! thanks, dan

pics just popped up! how about the switch?

**Todd68Chevy** · 05-13-2010, 09:17 PM

Quote:

Originally Posted by w314speed

interested in the auxiliary fuel wiring harneses! does it include the dash mounted switch for the fuel guage control? pics please! thanks, dan

pics just popped up! how about the switch?

No switch is included because the switch had been replaced with a universal toggle switch. Instead of cutting the harness they made an adapter connection. I might be able to do better on the price if I have your zip and can figure shipping cost if your interested. Thanks, Todd

**Todd68Chevy** · 05-13-2010, 09:20 PM

One more group of pictures.

**w314speed** · 05-13-2010, 10:01 PM

zip is 30127. I'll take it! PM me for paypal info. Thanks, Dan

**Todd68Chevy** · 05-14-2010, 06:51 AM

Quote:

Originally Posted by w314speed

zip is 30127. I'll take it! PM me for paypal info. Thanks, Dan

PM sent. Thanks

**Todd68Chevy** · 05-15-2010, 10:26 AM

Quote:

Originally Posted by w314speed

zip is 30127. I'll take it! PM me for paypal info. Thanks, Dan

Dual tank switch wiring sold pending payment.

spyder4560 · 05-16-2010, 05:03 PM

Quote:

Originally Posted by Todd68Chevy

As I have time I am parting out and selling off the parts I do not need from a 1972 Chevy C20 Custom Camper Big Block truck. This is some of the parts that I have off at this time.

1. AM Radio with speaker and bracket: I do not know if it works, chrome does have some pitting. $30.00 shipped to 48 states

2. Cargo light with switch and wiring: The chrome is pitted but the lense looks good with slight cracks, wiring runs to the connectors by the fuse box, the light worked when I powered it up but the bulb had to be pushed in- might have incorrect bulb ? $25.00 shipped to 48 states

3. Custom Camper Emblems: some pitting, 2 emblems have 1 stud broken on each and 2 emblems have some overspray paint on them. $20.00 shipped to 48 states

4. Wiring harness for the dual fuel tank gauge switch on the dash: includes the connector for the switch, connector for the inside sender, connector for gauge wire, firewall pass thru plug and some wire running to the rear sender $14.00 shipped to 48 states

5. Gas pedal assy. with kick down switch and cable from a big block/ turbo 400, also has the wiring harness for the kick down switch. $45.00 shipped to 48 states

6. Cig. Lighter, housing and trim: used, looks good but working condition unknown $12.00 shipped to 48 states

7: Parking brake pedal assy.: pedal looks like good used condition but the locking paw does not want to stay engaged, I think a spring might be bad but I am not sure what should make it tight $15.00 shipped to 48 states

Ask all questions, post to the thread before sending private message, I will be happy to get pictures of anything and answer any questions. I do accept PayPal for no extra charge or Money order as payment. Thanks for looking, Todd

I am needing a brake booster/master cyl./prop.valve setup from this type truck.If you have what I need ,what would be your price?

402GMC · 05-16-2010, 05:10 PM

i'll take the kick down switch and pedal stuff. send paypal info and i'll send the money. thanks. scott

**Todd68Chevy** · 05-16-2010, 05:46 PM

Quote:

Originally Posted by spyder4560

I am needing a brake booster/master cyl./prop.valve setup from this type truck.If you have what I need ,what would be your price?

I have all of it but I am not sure its condition. It all worked to load and unload the truck but I could not drive it because of suspension issues. I will get you pictures. Do you need the bracket between the booster and firewall? Thanks, Todd

Quote:

Originally Posted by 402GMC

i'll take the kick down switch and pedal stuff. send paypal info and i'll send the money. thanks. scott

PM sent. I am parting out the truck if there is something else you need let me know because I might have it. Thanks, Todd

**Todd68Chevy** · 05-16-2010, 09:42 PM

Quote:

Originally Posted by spyder4560

I am needing a brake booster/master cyl./prop.valve setup from this type truck.If you have what I need ,what would be your price?

Here are some pictures. It is missing the brace that goes from the master cylinder mounting stud to the proportioning valve. I would take $25.00 plus shipping. Let me know your zip code to check shipping. Thanks

spyder4560 · 05-18-2010, 01:00 AM

Quote:

Originally Posted by Todd68Chevy

I have all of it but I am not sure its condition. It all worked to load and unload the truck but I could not drive it because of suspension issues. I will get you pictures. Do you need the bracket between the booster and firewall? Thanks, Todd

PM sent. I am parting out the truck if there is something else you need let me know because I might have it. Thanks, Todd

I would like to get the booster,MC,firewall bracket,proportioning valve,and rod to brake pedal if possible.That way I avoid any modifications.Shoot me a PM and let me know your price to ship to 40422.Thanks for the reply.

**Todd68Chevy** · 05-18-2010, 08:46 PM

Quote:

Originally Posted by spyder4560

I would like to get the booster,MC,firewall bracket,proportioning valve,and rod to brake pedal if possible.That way I avoid any modifications.Shoot me a PM and let me know your price to ship to 40422.Thanks for the reply.

Here are pictures of the bracket and pedal rod. The only part I have not come up with is the bracket that mounts the proportioning valve to the master cylinder stud. PM sent

Twisted71c10 · 05-18-2010, 08:52 PM

todd,
kind of an off topic question, but i noticed you were from Indiana also........ you have any ideas of where i could find myself a 70-72 c10 project ?

**Todd68Chevy** · 05-19-2010, 06:42 AM

Quote:

Originally Posted by w314speed

zip is 30127. I'll take it! PM me for paypal info. Thanks, Dan

Fuel Gauge wiring SOLD, Thanks

Quote:

Originally Posted by TRILOGYZ28

todd,
kind of an off topic question, but i noticed you were from Indiana also........ you have any ideas of where i could find myself a 70-72 c10 project ?

Responded in the Calling Indiana Thread, Thanks

**Todd68Chevy** · 05-19-2010, 10:01 PM

Quote:

Originally Posted by 402GMC

i'll take the kick down switch and pedal stuff. send paypal info and i'll send the money. thanks. scott

Gas pedal/ kickdown switch and wiring sold, Thanks, Todd

**Todd68Chevy** · 05-30-2010, 10:56 PM

I would be willing to try to set up meeting buyers at Indy GoodGuys or Bowling Green Hot Rod Reunion with parts to save on shipping. I would require at least a down payment in advance before I would bring the parts. I am also part out this truck if there is anything else you need. Thanks, Todd

**Todd68Chevy** · 06-21-2010, 06:38 PM

Parts still available. Offers ? ttt

twostiks · 06-22-2010, 05:51 AM

Did you sell the brackets for the master cyl and booster assy? I just need the two brackets in the picture. Price shipped to 24153? Thanks, Eric

**Todd68Chevy** · 06-22-2010, 06:28 AM

Quote:

Originally Posted by twostiks

Did you sell the brackets for the master cyl and booster assy? I just need the two brackets in the picture. Price shipped to 24153? Thanks, Eric

I still have them. I will check them and shipping tonight. Thanks, Todd

**Todd68Chevy** · 06-22-2010, 09:54 PM

Quote:

Originally Posted by twostiks

Did you sell the brackets for the master cyl and booster assy? I just need the two brackets in the picture. Price shipped to 24153? Thanks, Eric

Eric, PM sent

Thanks, Todd

IndyRich · 06-23-2010, 01:16 AM

Hey fellow Hoosier...... What is the shape of the bed (if it is a long bed) Also I have rear leaf springs and don't have any brackets for rear shocks, do you have those?

Also, a long shot I know, I need a passenger door weather strip.

Thanks in advance.

**Todd68Chevy** · 06-23-2010, 06:24 AM

Quote:

Originally Posted by IndyRich

Hey fellow Hoosier...... What is the shape of the bed (if it is a long bed) Also I have rear leaf springs and don't have any brackets for rear shocks, do you have those?

Also, a long shot I know, I need a passenger door weather strip.

Thanks in advance.

Rich,

I would sell the bed but it is rough. It has a metal floor with a lot of holes. It is a coil spring truck. I would have to look at the weatherstrip but my guess is that it is poor also. I will check better tonight and let you know.

Thanks, Todd

05-13-2010, 08:57 PM	#1
Todd68Chevy Senior Member Join Date: Oct 2009 Location: Shelburn Indiana Posts: 3,975	Misc. 72 Chevy C20 Parts, Cargo light, AM Radio, Custom Camper Emblems, More As I have time I am parting out and selling off the parts I do not need from a 1972 Chevy C20 Custom Camper Big Block truck. This is some of the parts that I have off at this time. 1. AM Radio with speaker and bracket: I do not know if it works, chrome does have some pitting. SOLD 2. Cargo light with switch and wiring: The chrome is pitted but the lense looks good with slight cracks, wiring runs to the connectors by the fuse box, the light worked when I powered it up but the bulb had to be pushed in- might have incorrect bulb ---SOLD 3. Custom Camper Emblems: some pitting, 2 emblems have 1 stud broken on each and 2 emblems have some overspray paint on them. SOLD 4. Wiring harness for the dual fuel tank gauge switch on the dash: includes the connector for the switch, connector for the inside sender, connector for gauge wire, firewall pass thru plug and some wire running to the rear sender SOLD 5. Gas pedal assy. with kick down switch and cable from a big block/ turbo 400, also has the wiring harness for the kick down switch. SOLD 6. Cig. Lighter, housing and trim: used, looks good but working condition unknown SOLD 7: Parking brake pedal assy.: pedal looks like good used condition but the locking paw does not want to stay engaged, I think a spring might be bad but I am not sure what should make it tight $15.00 shipped to 48 states Ask all questions, post to the thread before sending private message, I will be happy to get pictures of anything and answer any questions. I do accept PayPal for no extra charge or Money order as payment. Thanks for looking, Todd Attached Images __________________ Note: All parts I have for sale are also for sale locally. I currently own: 1940 Chevy Fire truck (project), 1946 Chevy truck (project), 1946 Chevy 1 Ton pick up, 1953 Chevy school bus (storage area), 1968 Chevy C10 (I have drove for 26 years), 1994 Chevy C2500 (daily driver), 2005 GMC crew cab K2500 (parts hauler) and more trucks for parts. Last edited by Todd68Chevy; 04-29-2011 at 07:01 AM. Reason: Part sold

05-13-2010, 09:02 PM	#2
Todd68Chevy Senior Member Join Date: Oct 2009 Location: Shelburn Indiana Posts: 3,975	Re: Misc. 72 Chevy C20 Parts, Cargo light, AM Radio, Custom Camper Emblems, More More pictures Attached Images __________________ Note: All parts I have for sale are also for sale locally. I currently own: 1940 Chevy Fire truck (project), 1946 Chevy truck (project), 1946 Chevy 1 Ton pick up, 1953 Chevy school bus (storage area), 1968 Chevy C10 (I have drove for 26 years), 1994 Chevy C2500 (daily driver), 2005 GMC crew cab K2500 (parts hauler) and more trucks for parts.

05-13-2010, 09:08 PM	#3
Todd68Chevy Senior Member Join Date: Oct 2009 Location: Shelburn Indiana Posts: 3,975	Re: Misc. 72 Chevy C20 Parts, Cargo light, AM Radio, Custom Camper Emblems, More More pictures Attached Images __________________ Note: All parts I have for sale are also for sale locally. I currently own: 1940 Chevy Fire truck (project), 1946 Chevy truck (project), 1946 Chevy 1 Ton pick up, 1953 Chevy school bus (storage area), 1968 Chevy C10 (I have drove for 26 years), 1994 Chevy C2500 (daily driver), 2005 GMC crew cab K2500 (parts hauler) and more trucks for parts.

05-13-2010, 09:11 PM	#4
w314speed Senior Member Join Date: Jun 2005 Location: atlanta Posts: 2,315	Re: Misc. 72 Chevy C20 Parts, Cargo light, AM Radio, Custom Camper Emblems, More interested in the auxiliary fuel wiring harneses! does it include the dash mounted switch for the fuel guage control? pics please! thanks, dan pics just popped up! how about the switch? Last edited by w314speed; 05-13-2010 at 09:12 PM.

05-13-2010, 09:20 PM	#6
Todd68Chevy Senior Member Join Date: Oct 2009 Location: Shelburn Indiana Posts: 3,975	Re: Misc. 72 Chevy C20 Parts, Cargo light, AM Radio, Custom Camper Emblems, More One more group of pictures. Attached Images __________________ Note: All parts I have for sale are also for sale locally. I currently own: 1940 Chevy Fire truck (project), 1946 Chevy truck (project), 1946 Chevy 1 Ton pick up, 1953 Chevy school bus (storage area), 1968 Chevy C10 (I have drove for 26 years), 1994 Chevy C2500 (daily driver), 2005 GMC crew cab K2500 (parts hauler) and more trucks for parts.

05-13-2010, 10:01 PM	#7
w314speed Senior Member Join Date: Jun 2005 Location: atlanta Posts: 2,315	Re: Misc. 72 Chevy C20 Parts, Cargo light, AM Radio, Custom Camper Emblems, More zip is 30127. I'll take it! PM me for paypal info. Thanks, Dan

05-16-2010, 05:10 PM	#11
402GMC Registered User Join Date: May 2008 Location: RAPID CITY, SOUTH DAKOTA Posts: 411	Re: Misc. 72 Chevy C20 Parts, Cargo light, AM Radio, Custom Camper Emblems, More i'll take the kick down switch and pedal stuff. send paypal info and i'll send the money. thanks. scott

05-18-2010, 08:52 PM	#16
Twisted71c10 Registered User Join Date: Feb 2005 Location: Indiana Posts: 163	Re: Misc. 72 Chevy C20 Parts, Cargo light, AM Radio, Custom Camper Emblems, More todd, kind of an off topic question, but i noticed you were from Indiana also........ you have any ideas of where i could find myself a 70-72 c10 project ?

05-30-2010, 10:56 PM	#19
Todd68Chevy Senior Member Join Date: Oct 2009 Location: Shelburn Indiana Posts: 3,975	Re: Misc. 72 Chevy C20 Parts, Cargo light, AM Radio, Custom Camper Emblems, More I would be willing to try to set up meeting buyers at Indy GoodGuys or Bowling Green Hot Rod Reunion with parts to save on shipping. I would require at least a down payment in advance before I would bring the parts. I am also part out this truck if there is anything else you need. Thanks, Todd __________________ Note: All parts I have for sale are also for sale locally. I currently own: 1940 Chevy Fire truck (project), 1946 Chevy truck (project), 1946 Chevy 1 Ton pick up, 1953 Chevy school bus (storage area), 1968 Chevy C10 (I have drove for 26 years), 1994 Chevy C2500 (daily driver), 2005 GMC crew cab K2500 (parts hauler) and more trucks for parts.

06-21-2010, 06:38 PM	#20
Todd68Chevy Senior Member Join Date: Oct 2009 Location: Shelburn Indiana Posts: 3,975	Re: Misc. 72 Chevy C20 Parts, Cargo light, AM Radio, Custom Camper Emblems, More Parts still available. Offers ? ttt __________________ Note: All parts I have for sale are also for sale locally. I currently own: 1940 Chevy Fire truck (project), 1946 Chevy truck (project), 1946 Chevy 1 Ton pick up, 1953 Chevy school bus (storage area), 1968 Chevy C10 (I have drove for 26 years), 1994 Chevy C2500 (daily driver), 2005 GMC crew cab K2500 (parts hauler) and more trucks for parts.

06-22-2010, 05:51 AM	#21
twostiks Registered User Join Date: Apr 2010 Location: Salem,VA Posts: 14	Re: Misc. 72 Chevy C20 Parts, Cargo light, AM Radio, Custom Camper Emblems, More Did you sell the brackets for the master cyl and booster assy? I just need the two brackets in the picture. Price shipped to 24153? Thanks, Eric Attached Images __________________ 69 3/4 Ton GMC CamperSpecial 99 Suburban 2500

06-23-2010, 01:16 AM	#24
IndyRich Registered User Join Date: Feb 2009 Location: Indianapolis, IN Posts: 372	Re: Misc. 72 Chevy C20 Parts, Cargo light, AM Radio, Custom Camper Emblems, More Hey fellow Hoosier...... What is the shape of the bed (if it is a long bed) Also I have rear leaf springs and don't have any brackets for rear shocks, do you have those? Also, a long shot I know, I need a passenger door weather strip. Thanks in advance.



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.