Played with the truck today.. - The 1947 - Present Chevrolet & GMC Truck Message Board Network

Super73 · 05-22-2010, 11:21 PM

Got to go to an old school 1/8 mile deal today. It was for 73 and earlier, no track prep, no lights and a flagger in the middle. I set the truck up real loose and it worked pretty darned good. Enough for me to see if my N20 woes have been fixed. Well, I was sort of blessed by the N20 godess..

First pass was all motor against a early 2nd gen camaro. He left on the up of the flag and I left on the down so he was about 1 1/2 car out on me. I was realling him in and at the finish line, we were with in inches of each other (I think he might have edged me out). Awesome race!!

Second pass was with a 63-64 nova. Tubbed and caged, Bigblock with a dual carb tunnel ram with a big tire (bigger than my 315/60). I thought I was going to get waxed!!! I ended up gating him and got him by a good amount

Third pass I decided to open the bottle up and try the first stage 100 hit. Everything worked out but was pig rich. 58psi for fuel pressure, 57 jet in the N20 and a 31 in the fuel side. Wideband read bottom 10's for air fuel. Still though nice clean pass and let's say the guy in the other lane did not know what hit him..

Fourth pass I changed the fuel jet to a 28. A/F leaned a bit to 10.5ish. This was the only pass I used my track tested Gtech (always .1 and 1mph in my favor at the track in the 1/4 with a dead on 60'). Spun to a 2.0x but went 7.44 @ 102.74..

noonzor · 05-23-2010, 12:28 AM

thats awesome! nice numbers man!

rjs53 · 05-23-2010, 10:41 AM

sounds like a good time, especially when your going rounds

KQQL IT · 05-23-2010, 03:09 PM

73 was that the Dos palos thing?

team39763 · 05-23-2010, 06:16 PM

No videos?

Super73 · 05-23-2010, 06:25 PM

Yes, the Dos Palos deal.. There is another one going to happen in Oct but it's 65 and earlier.. I'll be there

I'm waiting on some pics and maybe video.. But I did not have anyone there that was taking video for me..

KQQL IT · 05-23-2010, 07:52 PM

Id heard about it. Wish my dash was finished...

Super73 · 05-24-2010, 02:02 AM

Here are some pics I found from the event!!

http://www.hotrodrevue.co.nz/forum/v....php?f=6&t=215

And 1 lucky save!! this was right in front of me:

YouTube- Eagle Field Drags 2010. 57 chevy vs...

noonzor · 05-24-2010, 10:17 AM

sweet man, close call on that malibu!! some sweeeeeet rides in those pics too!

oldblue1968chevy · 05-28-2010, 09:57 PM

wow that was close i bet he crapped himself i woulda

05-22-2010, 11:21 PM	#1
Super73 Registered User Join Date: Nov 2007 Location: Bay Area, Ca Posts: 2,841	Played with the truck today.. Got to go to an old school 1/8 mile deal today. It was for 73 and earlier, no track prep, no lights and a flagger in the middle. I set the truck up real loose and it worked pretty darned good. Enough for me to see if my N20 woes have been fixed. Well, I was sort of blessed by the N20 godess.. First pass was all motor against a early 2nd gen camaro. He left on the up of the flag and I left on the down so he was about 1 1/2 car out on me. I was realling him in and at the finish line, we were with in inches of each other (I think he might have edged me out). Awesome race!! Second pass was with a 63-64 nova. Tubbed and caged, Bigblock with a dual carb tunnel ram with a big tire (bigger than my 315/60). I thought I was going to get waxed!!! I ended up gating him and got him by a good amount Third pass I decided to open the bottle up and try the first stage 100 hit. Everything worked out but was pig rich. 58psi for fuel pressure, 57 jet in the N20 and a 31 in the fuel side. Wideband read bottom 10's for air fuel. Still though nice clean pass and let's say the guy in the other lane did not know what hit him.. Fourth pass I changed the fuel jet to a 28. A/F leaned a bit to 10.5ish. This was the only pass I used my track tested Gtech (always .1 and 1mph in my favor at the track in the 1/4 with a dead on 60'). Spun to a 2.0x but went 7.44 @ 102.74.. __________________ ------Motor---------------Bottle 60'---1.53---------------1.41 1/8---6.58 @ 105.92----5.87 @ 118.41 1/4---10.38 @ 126.97----9.24 @ 142.49

05-23-2010, 12:28 AM	#2
noonzor Registered User Join Date: Aug 2009 Location: Edmonton, Alberta Posts: 818	Re: Played with the truck today.. thats awesome! nice numbers man! __________________ 69 c10 Shortbox Build http://67-72chevytrucks.com/vboard/s...d.php?t=360622

05-23-2010, 10:41 AM	#3
rjs53 Registered User Join Date: Jan 2010 Location: nevada Posts: 649	Re: Played with the truck today.. sounds like a good time, especially when your going rounds __________________ 2003 Dodge 2500 1969 C10 2014 Camaro SS/RS/1LE

05-23-2010, 03:09 PM	#4
KQQL IT At the body shop. Join Date: Aug 2009 Location: Land of fruits and nuts. Posts: 5,260	Re: Played with the truck today.. 73 was that the Dos palos thing? __________________ " That didnt make it any newer " " Dont antique the equipment "

05-23-2010, 06:16 PM	#5
team39763 Registered User Join Date: Feb 2007 Location: Texas Posts: 469	Re: Played with the truck today.. No videos? __________________ 1982 Silverado - SBE, cleaned up GM heads, small cam, TH350, 850 Demon, 4.56 gears, and caltracs. Best time so far 11.8@XXXMPH

05-23-2010, 06:25 PM	#6
Super73 Registered User Join Date: Nov 2007 Location: Bay Area, Ca Posts: 2,841	Re: Played with the truck today.. Yes, the Dos Palos deal.. There is another one going to happen in Oct but it's 65 and earlier.. I'll be there I'm waiting on some pics and maybe video.. But I did not have anyone there that was taking video for me.. __________________ ------Motor---------------Bottle 60'---1.53---------------1.41 1/8---6.58 @ 105.92----5.87 @ 118.41 1/4---10.38 @ 126.97----9.24 @ 142.49

05-23-2010, 07:52 PM	#7
KQQL IT At the body shop. Join Date: Aug 2009 Location: Land of fruits and nuts. Posts: 5,260	Re: Played with the truck today.. Id heard about it. Wish my dash was finished... __________________ " That didnt make it any newer " " Dont antique the equipment "

05-24-2010, 10:17 AM	#9
noonzor Registered User Join Date: Aug 2009 Location: Edmonton, Alberta Posts: 818	Re: Played with the truck today.. sweet man, close call on that malibu!! some sweeeeeet rides in those pics too! __________________ 69 c10 Shortbox Build http://67-72chevytrucks.com/vboard/s...d.php?t=360622

05-28-2010, 09:57 PM	#10
oldblue1968chevy Grandpa in the rustmobile... Join Date: Nov 2008 Location: Spokane WA/Viola TN Posts: 11,422	Re: Played with the truck today.. wow that was close i bet he crapped himself i woulda __________________ John Goose-1968 C10 355,9.32-1CR, Vortec Heads ,262 voodoo, 3.73:1 3OTT (HS ride/beater/farm truck) http://67-72chevytrucks.com/vboard/s...d.php?t=317684 Grams 53-1953 Chevrolet Belair http://67-72chevytrucks.com/vboard/s...=1#post4327784 1969 Chevy C10 Shortbed 4.5/6?" Frame off resto http://67-72chevytrucks.com/vboard/s...d.php?t=548136 1999 Toyota Tacoma 4x4



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.