The 1947 - Present Chevrolet & GMC Truck Message Board Network







Register or Log In To remove these advertisements.

Go Back   The 1947 - Present Chevrolet & GMC Truck Message Board Network > 47 - Current classic GM Trucks > The 1973 - 1987 Chevrolet & GMC Squarebody Pickups Message Board

Web 67-72chevytrucks.com


Reply
 
Thread Tools Display Modes
Old 04-22-2001, 10:16 AM   #1
Boog
laying low
 
Boog's Avatar
 
Join Date: Mar 2001
Location: Searcy, Ark. USA
Posts: 13,531
Question 87 fuel injected trucks

What is the general opinions of the stock injection system of the 87 1/2 ton trucks? Do they require much maintenance? Would one be ok for a daily driver with maybe headers, a chip and not much else? The most I would be carrying would be a small fishing boat on trailer.I've not heard anything about these systems from owners to know the good and bad, if any. Is the 87 the same as the 88 up TBIs? I drove an 88 with only a new chip in it that really hauled butt. Thanks, Boog.
__________________
Boog
69 Chevy stepside, 358/T350, 4.11 posi, 4.5/4 drop, rallys, poboy driver
primer is finer
91 Chevy sportside, Tahoe, Yukon & GMC Crewcab All GM..'nuff said.

I stand for the flag and kneel at the cross
Boog is offline   Reply With Quote
Old 04-23-2001, 08:22 AM   #2
Captkaos
www.73-87chevytrucks.com
 
Captkaos's Avatar
 
Join Date: Dec 1999
Location: Birmingham, AL
Posts: 6,935
Post

The motors in the '87 are indentical to the 88 model motors. They would be perfect in my opinion as a daily driver. As far as what options are offered, not sure I understand your question.

------------------
Chris Lucas
1973 Chevy C-10
1975 Chevy Silverado
Captkaos' Page

__________________
Chris Lucas
1973 Chevy C-10
1978 GMC Jimmy (2WD) - SOLD
1987 R10 twin turbo LS
1991 R3500 SRW CrewCab
1985 K5 diesel swapped project
1989 K5 2WD conversion w/ Vette susp Project
Captkaos Customs
73-87chevytrucks.com
Captkaos is offline   Reply With Quote
Old 04-23-2001, 08:45 AM   #3
racedvl
Account Suspended
 
racedvl's Avatar
 
Join Date: Jan 2000
Location: Woodstock, IL
Posts: 7,020
Post

My 87 4x4 suburban is fuel injected, stock, and I have pulled quite a few things that were heavy. Including my 69 on a full trailer from Chicago to my house, all in stop and go traffic. about a 2 hour trip. It performed great! I don't have to do much maitance. It has 161,00 miles and is my daily driver. The only time it ran bad for me was when it needed a EGR valve.

------------------
http://hometown.aol.com/racedvl/racedvl69index.html

Crystal Lake IL. 30 Miles north of Chicago


racedvl is offline   Reply With Quote
Old 04-23-2001, 02:09 PM   #4
Boog
laying low
 
Boog's Avatar
 
Join Date: Mar 2001
Location: Searcy, Ark. USA
Posts: 13,531
Thumbs up

Hey Capt. My request was for opinions, not options. And thanks for your thoughts on the FIs. I'm leaning that way for mine. Since the 87 & 88s are the same, should be more available used. Thanks, Boog.
__________________
Boog
69 Chevy stepside, 358/T350, 4.11 posi, 4.5/4 drop, rallys, poboy driver
primer is finer
91 Chevy sportside, Tahoe, Yukon & GMC Crewcab All GM..'nuff said.

I stand for the flag and kneel at the cross
Boog is offline   Reply With Quote
Old 04-25-2001, 03:12 AM   #5
Captkaos
www.73-87chevytrucks.com
 
Captkaos's Avatar
 
Join Date: Dec 1999
Location: Birmingham, AL
Posts: 6,935
Post

Oops, it must have been early before my brain was able to read. I was in a hurry....

You can't go wrong with them in my opinion. But I am bias toward injection.

------------------
Chris Lucas
1973 Chevy C-10
1975 Chevy Silverado
Captkaos' Page

__________________
Chris Lucas
1973 Chevy C-10
1978 GMC Jimmy (2WD) - SOLD
1987 R10 twin turbo LS
1991 R3500 SRW CrewCab
1985 K5 diesel swapped project
1989 K5 2WD conversion w/ Vette susp Project
Captkaos Customs
73-87chevytrucks.com
Captkaos is offline   Reply With Quote
Old 05-04-2001, 01:44 PM   #6
u2slow
Web Wheeler
 
u2slow's Avatar
 
Join Date: Jan 2000
Location: BC, Canada, eh?
Posts: 388
Post

I've got no TBI-related complaints for my 91 4x4 crewcab. Its a 7000lb truck with a 350/4gear. I'm surprised I haven't killed it yet. Its a lot of truck for a small engine. Aside from basic consumables, it's needed a distributor and intake manifold (thermostat housing bolt seized)

The nicest part of the injection is the drivability. No more flooded carbs while 4-wheeling, and don't have to wait 10 mins for the bloody thing to warm up. As large and ornery as it is, I get 12mpg in the highway - 3000rpm all the way (ouch!)


------------------


[This message has been edited by u2slow (edited 05-04-2001).]
__________________

'66 C10 longstep - Clifford equiped
'84 C20 Suburban 6.2L - awaiting 4x4 conversion
'91 V3500 Crewcab - awaiting diesel swap
u2slow is offline   Reply With Quote
Reply

Bookmarks


Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -4. The time now is 12:47 PM.


Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Copyright 1997-2022 67-72chevytrucks.com