Hood locking ideas

[forestb]

Has anybody made a good way to lock there hood?

[raycow]

Maybe those pins that stick through a hole in the hood with a padlock on the outside will make a comeback. Very retro.

Ray

[markeb01]

Here's an earlier thread on the subject:

http://67-72chevytrucks.com/vboard/s...highlight=hood

[bama63]

saw a thread a few weeks back guy used a cable hood release with just minor modification and looked really sweet

[forestb]

Hay markeb01 thanks for the link. How did you attach the chain to the hood?

[Rich 5150 69]

Sorry could`nt resist

[markeb01]

Originally Posted by forestb

Hay markeb01 thanks for the link. How did you attach the chain to the hood?

I had to check, it's been a long time. Seems I drilled a hole in the inner hood support panel above and behind the latch, then attached the chain with a long bolt. This allows the chain to hang in just the right location. On the other side, I double nutted the bolt, the second nut being a Nylok. Like the bolt on the grille support, it would take a long time and be very difficult to detach either connection with the lock in place.

[c10Mang]

[forestb]

Has any body tried connecting the lock to the actual latch? Just a thought.

[Sillyoldman]

I put a Hornet Lock on my '71. Great setup imo. I can take some pics if interest.
Updated URL Amazon.com: Megatronix - HL6 - 6 Foot Mechanical...

[markeb01]

Originally Posted by forestb

Has any body tried connecting the lock to the actual latch? Just a thought.

If you mean connecting a padlock to the lower latch plate, that's where I actually had mine until I bought the chrome latch plate. I didn't want to drill any holes in the plating which is when the bolt on bracket was added. Here's a shot of the old plate, with the arrow pointing to the padlock hole:

[Sick5]

Originally Posted by Rich 5150 69

Sorry could`nt resist

lmao

[TheDark1]

Just some flat bar double nutted to the hood.

[forestb]

That is vary close to what I meant but for some reason my hood latch looks allot different than both of yours. I thik mine pulls up instead of forward but I will check.

[Sillyoldman]

Sillyoldman, you mentioned you installed the above hood lock - quick question for you: where it mounts in the cab - do you have to use the key every time you open the hood or can you leave the "in the cab" part unlocked so you never really need the key (i.e. kinda like a factory new vehicle interior hood latch)?

Thanks!
jocko

If the hood is locked then the ignition is also cut off. This setup is required to be unlocked to either open the hood or start the vehicle. I went to a car show one time and realized that I had forgotten the lock key. I kept a real close eye on that button all day. It can be installed wherever you like as long as the cable is long enough. It seemed to blend in under the steering column best for me. Here's a few pics. Hope this helps. IIRC I bought the 6' kit.

[jocko]

great, thanks sillyoldman!

[chevy_mike]

I need to get a picture of it but my truck had what looks like a factory or dealer installed bracket, that allows a small lock to be placed thru the release handle and the bracket, locking it so you can't release it. It is a stamped piece and bolts into the same location as the latch assembly and looks like something GM made, not some aftermarket/home made setup. I'll try to get pics tonight and post up but it works great.

[chevy_mike]

Sorry for the delay but here is what is on my truck. Again, first time I have ever seen this setup but it does work great. Should be fairly simple to replicate. I think most of the hood release handles already have the hole in it, from what I have seen.





Looking up from underneith

[markeb01]

That is very cool indeed. If it’s not factory, somebody went to a lot of trouble to make it appear so professionally done for something that will rarely be seen. That would be a great accessory for one of the aftermarket suppliers to produce, and as you mentioned it should be easy to reproduce.

Thanks for posting such detailed photos.

[C4 Metal Werks]

Left my truck outside the shop one night last week and some tweekers cut the battery cables out to sell the copper for drug money so I like what TheDark1 did for a hood lock and made my own version.

[1Bad62Pro/Street]

Seen something similar like this one before.
http://www.monkeysee.com/play/8187-H...k-for-your-car

[Red4x4]

Good Ideas.
Anyone else out there, post what you have done.

[HeatBox]

Here's a simple but effective lock I put on my '67. I used 1/8 steel and used the factory hole on the support.

[mafosa]

another idea, use a electronic mini actuator. somewhere in your custom trucks everyone has relay.

use the 5th pin to "go hot" when when the trucks parked. ad a toggle to the neg. side to over ride the actuator if you want to work on your truck without activating the electric choke.

or just run it on relayed n toggle system. many ways on this platform.

you can even get rid of your entire springs on the hinges. replace them with heavy duty actuators (metal gear type).

many of them have built in limit switches. these really no way someone can over come two of them to open the hood.

plus, now all you have to do is hit the switch to open your hood.

these are just concepts and ideas.

[LostMy65]

Saved for future reference.