MO Dana 60 front and 14 bolt rear - The 1947 - Present Chevrolet & GMC Truck Message Board Network

BLAZERMAN · 06-16-2010, 07:45 PM

I have a dually Dana 60 front with 4.10 gears..axle is complete with hubs and calipers. 14 bolt Cab & Chassis rear with 4.11 gears and low miles. Both axles will bolt right into a 67 to 72 4x4 truck. 850.00 for the pair.

*sharpie1972* · 06-16-2010, 07:58 PM

Great buy on these! Any history on mileage/rebuild etc.? Thanks, Sharpie

BLAZERMAN · 06-16-2010, 08:14 PM

Not sure on the front, gears look great..it just needs cleaned up and rotors turned with some new calipers..I would also change the king pin bushings and springs and pack wheel bearings and it will be good to go, probably less than 100.00 for everything.
Rear was out of a small GM motor home that had just over 40,000 miles.

BLAZERMAN · 06-19-2010, 05:43 PM

Ttt

thirdstreettito · 12-13-2010, 02:10 PM

That's a DRW 14BFF correct?

BLAZERMAN · 12-14-2010, 11:05 PM

Quote:

Originally Posted by thirdstreettito

That's a DRW 14BFF correct?

Correct, its from a Cab & Chassis truck= Dual rear wheel

BigSwid79 · 01-26-2011, 10:59 PM

Hey blazerman I got a buddy who is looking for a set of spicer external lockouts from your dana 60 front end maybe you could shoot him an email
14zimlev@manistee.org

Thanks, Swid

06-16-2010, 07:45 PM	#1
BLAZERMAN Currently Blazerless Join Date: Apr 2000 Location: St. Joseph Mo. Posts: 4,828	Dana 60 front and 14 bolt rear I have a dually Dana 60 front with 4.10 gears..axle is complete with hubs and calipers. 14 bolt Cab & Chassis rear with 4.11 gears and low miles. Both axles will bolt right into a 67 to 72 4x4 truck. 850.00 for the pair. __________________ 1972 C/30 133" W.B. C&C 1970 GMC 3500 157" W.B. single wheel C&C

06-16-2010, 07:58 PM	#2
sharpie1972 Account Suspended Join Date: Apr 2007 Location: Powell, Wyoming Posts: 4,973	Re: Dana 60 front and 14 bolt rear Great buy on these! Any history on mileage/rebuild etc.? Thanks, Sharpie

06-16-2010, 08:14 PM	#3
BLAZERMAN Currently Blazerless Join Date: Apr 2000 Location: St. Joseph Mo. Posts: 4,828	Re: Dana 60 front and 14 bolt rear Not sure on the front, gears look great..it just needs cleaned up and rotors turned with some new calipers..I would also change the king pin bushings and springs and pack wheel bearings and it will be good to go, probably less than 100.00 for everything. Rear was out of a small GM motor home that had just over 40,000 miles. __________________ 1972 C/30 133" W.B. C&C 1970 GMC 3500 157" W.B. single wheel C&C

06-19-2010, 05:43 PM	#4
BLAZERMAN Currently Blazerless Join Date: Apr 2000 Location: St. Joseph Mo. Posts: 4,828	Re: Dana 60 front and 14 bolt rear Ttt __________________ 1972 C/30 133" W.B. C&C 1970 GMC 3500 157" W.B. single wheel C&C

12-13-2010, 02:10 PM	#5
thirdstreettito Resident of Here Join Date: May 2008 Location: Wesley Chapel, FL, USA Posts: 7,716	Re: Dana 60 front and 14 bolt rear That's a DRW 14BFF correct? __________________ ~Bradley~ 2004 Black GTO LS2/T56 too much to list Miss having a truck

01-26-2011, 10:59 PM	#7
BigSwid79 Registered User Join Date: Jan 2011 Location: Manistee, Mi Posts: 112	Re: Dana 60 front and 14 bolt rear Hey blazerman I got a buddy who is looking for a set of spicer external lockouts from your dana 60 front end maybe you could shoot him an email 14zimlev@manistee.org Thanks, Swid



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.