Power Window Conversion - The 1947 - Present Chevrolet & GMC Truck Message Board Network

ljbear · 02-16-2003, 11:44 AM

I'm looking for input from those that have changed to power windows. What brand, where they bought the kit, any problems, how well they actually work, any regrets? I want to stick with the wing windows, so the one piece conversion is out.

Thanks

Larry

ljbear · 02-19-2003, 06:46 PM

Anyone?

minibike · 02-19-2003, 06:52 PM

There was a thread on this a few months ago...

http://67-72chevytrucks.com/vboard/s...=power+windows

TERRYP · 02-19-2003, 07:01 PM

A1-ELECTRIC.COM

Pont · 02-19-2003, 10:09 PM

Same here, A1-Electric power window kit. Works great, no regrets. I'll definitely do it again on my 2wd project.

guitarman · 02-19-2003, 10:42 PM

Here's the site and they are the best and easiest to do.

http://www.a1electric.com/index.htm

02-16-2003, 11:44 AM	#1
ljbear Registered User Join Date: Jan 2003 Location: Emmett, Idaho Posts: 858	Power Window Conversion I'm looking for input from those that have changed to power windows. What brand, where they bought the kit, any problems, how well they actually work, any regrets? I want to stick with the wing windows, so the one piece conversion is out. Thanks Larry __________________ Larry 72 Chevy SWB 4x4 71 Chevy SWB 4x4 My Work Truck "Don't confuse enthusiasm with capability" Last edited by ljbear; 02-19-2003 at 06:45 PM.

02-19-2003, 06:46 PM	#2
ljbear Registered User Join Date: Jan 2003 Location: Emmett, Idaho Posts: 858	Anyone? __________________ Larry 72 Chevy SWB 4x4 71 Chevy SWB 4x4 My Work Truck "Don't confuse enthusiasm with capability"

02-19-2003, 06:52 PM	#3
minibike Registered User Join Date: Jun 2002 Location: Lafayette, LA Posts: 500	There was a thread on this a few months ago... http://67-72chevytrucks.com/vboard/s...=power+windows __________________ 69 SWB LT1/4L60E www.classicplace.com

02-19-2003, 07:01 PM	#4
TERRYP GYRO GEARLOOSE Join Date: Jun 2000 Location: Nevada City, CAEverett, WA Posts: 361	A1-ELECTRIC.COM __________________ Nevada City, CA Everett, Washington 57 3/4 rat, 235, 3spd 66 C-10 Panel, SWB. 350 from '68, 200R4 tranny, 3.07 rear ratio, restoring 68 C10 LWB 350 4spd, 4.56 rear dump runner 82 Camaro, 305, THM-200-R4 84 Monte Carlo 305 TH350, land tuna 85 Tercel SW, snow runner DISGRACED OUTLAW MEMBER OF THE DRUM BRAKE CLUB

02-19-2003, 10:09 PM	#5
Pont I need another Barley Pop Join Date: Feb 2001 Location: Grants Pass, OR Posts: 1,629	Same here, A1-Electric power window kit. Works great, no regrets. I'll definitely do it again on my 2wd project. __________________ 67 Short Fleet 4x4 04 Honda CRF450R 89 Toyota 4-Runner 34 Ford 2 door sedan - Long term project ---------------------------------------------- There is a very fine line between "hobby" and "mental illness"

02-19-2003, 10:42 PM	#6
guitarman Do it well or don't do it Join Date: Apr 2002 Location: Georgia Posts: 457	Here's the site and they are the best and easiest to do. http://www.a1electric.com/index.htm __________________ Try to be the person your dog thinks you are. Excellent paint and body site: http://www.autobody101.com/ Visit my Web Site http://home.attbi.com/~agfosteriii



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.