Rear Fender replacement.. - The 1947 - Present Chevrolet & GMC Truck Message Board Network

53GMC · 06-25-2010, 10:57 AM

hey guys,

i am trying to find two rear fenders for my 1953 GMC 1/2 ton truck and I found some fiberglass ones in a Classic Industries catalog. It says that they are made to fit the 1947-55 Suburbans but I was wondering if they would fit my pickup? Does anyone with a suburban know how close they are to the rear fenders of the 1/2 ton pickups?

Thanks again!

MrTucker · 06-25-2010, 01:31 PM

I'm not an expert but I dont think they are anywhere close

53GMC · 06-25-2010, 01:34 PM

ok...thank you Mr. Tucker...the picture seemed as if they were really close but if they aren't then the search will continue!! Thank you

'58Patch · 06-25-2010, 01:43 PM

Check this out:
http://www.goodmarkindustries.com/mo...&parts=600-699

53GMC · 06-25-2010, 03:57 PM

Thanks 58Patch! I will be looking more into those as well as some from LMC Truck and Classic.....trying to find the best option to save some money!

NONHOG · 06-25-2010, 04:03 PM

Yep the panel/burb fenders mount up and down into the body where p/u's
mount horizontal. And p/u's are wider.

Russell Ashley · 06-25-2010, 04:20 PM

Quote:

Originally Posted by 53GMC

Thanks 58Patch! I will be looking more into those as well as some from LMC Truck and Classic.....trying to find the best option to save some money!

Goodmark is here in Lawrenceville, not that far from Washington, Ga. You can pickup parts there and save shipping charges so keep that in mind if you decide to purchase a pair of fenders.

pgf545 · 06-25-2010, 09:33 PM

You might try these guys also. I have never dealt with them so I know nothing about them either. They have steel ones and fiberglass ones, I noticed that they have wider ones also. I found them a while back when I was looking for wider fenders. We haven't bought them yet but it is one of my options.

http://www.superiorglassworks.com/19...-products.html

Bernie

53GMC · 06-27-2010, 10:43 PM

thanks guys! that helps a lot!

Russell Ashley - thanks man...i didn't know Lawrenceville was that close! but that is something I am considering now! Its kinda hard to find places with enough of used parts these days!

06-25-2010, 10:57 AM	#1
53GMC Registered User Join Date: Jul 2009 Location: Washington, GA Posts: 319	Rear Fender replacement.. hey guys, i am trying to find two rear fenders for my 1953 GMC 1/2 ton truck and I found some fiberglass ones in a Classic Industries catalog. It says that they are made to fit the 1947-55 Suburbans but I was wondering if they would fit my pickup? Does anyone with a suburban know how close they are to the rear fenders of the 1/2 ton pickups? Thanks again! __________________ 1953 GMC/S 10 Swap http://67-72chevytrucks.com/vboard/s...d.php?t=357365

06-25-2010, 01:31 PM	#2
MrTucker Registered User Join Date: Apr 2008 Location: Denver, CO Posts: 455	Re: Rear Fender replacement.. I'm not an expert but I dont think they are anywhere close __________________ 1953 GMC 1/2 ton long bed Original 228 I6 with a Hydramatic Auto Tranny Project Pack Rat - http://67-72chevytrucks.com/vboard/s....php?p=3374649

06-25-2010, 01:34 PM	#3
53GMC Registered User Join Date: Jul 2009 Location: Washington, GA Posts: 319	Re: Rear Fender replacement.. ok...thank you Mr. Tucker...the picture seemed as if they were really close but if they aren't then the search will continue!! Thank you __________________ 1953 GMC/S 10 Swap http://67-72chevytrucks.com/vboard/s...d.php?t=357365

06-25-2010, 01:43 PM	#4
'58Patch Registered User Join Date: May 2010 Location: Cardiff, CA Posts: 54	Re: Rear Fender replacement.. Check this out: http://www.goodmarkindustries.com/mo...&parts=600-699 __________________ View my truck's story here: http://67-72chevytrucks.com/vboard/s...d.php?t=402996

06-25-2010, 03:57 PM	#5
53GMC Registered User Join Date: Jul 2009 Location: Washington, GA Posts: 319	Re: Rear Fender replacement.. Thanks 58Patch! I will be looking more into those as well as some from LMC Truck and Classic.....trying to find the best option to save some money! __________________ 1953 GMC/S 10 Swap http://67-72chevytrucks.com/vboard/s...d.php?t=357365

06-25-2010, 04:03 PM	#6
NONHOG Registered User Join Date: Feb 2007 Location: Marana, Arizona Posts: 3,416	Re: Rear Fender replacement.. Yep the panel/burb fenders mount up and down into the body where p/u's mount horizontal. And p/u's are wider. __________________ "I feel the need for speed!"... as soon as I am done with my nap.

06-25-2010, 09:33 PM	#8
pgf545 Registered User Join Date: May 2006 Location: Santa Fe,Texas Posts: 933	Re: Rear Fender replacement.. You might try these guys also. I have never dealt with them so I know nothing about them either. They have steel ones and fiberglass ones, I noticed that they have wider ones also. I found them a while back when I was looking for wider fenders. We haven't bought them yet but it is one of my options. http://www.superiorglassworks.com/19...-products.html Bernie __________________ 52 Chevy Truck (Dad's) http://67-72chevytrucks.com/vboard/s...d.php?t=206021

06-27-2010, 10:43 PM	#9
53GMC Registered User Join Date: Jul 2009 Location: Washington, GA Posts: 319	Re: Rear Fender replacement.. thanks guys! that helps a lot! Russell Ashley - thanks man...i didn't know Lawrenceville was that close! but that is something I am considering now! Its kinda hard to find places with enough of used parts these days! __________________ 1953 GMC/S 10 Swap http://67-72chevytrucks.com/vboard/s...d.php?t=357365



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.