drop spindle HELP!! - The 1947 - Present Chevrolet & GMC Truck Message Board Network

ANDREW · 07-03-2010, 10:06 PM

ok guys so i have a 1983 chevy c20 i need some drop spindles that are 2" drop
will these work

it says 2500 is that the same as my 3/4 ton c20

http://cgi.ebay.com/ebaymotors/2-1-2...cessories#shId

staggerd86c-10 · 07-03-2010, 10:09 PM

I hope they do work out cause thats a really good deal. I think those spindles go for about 350.

ANDREW · 07-03-2010, 10:12 PM

i know i mean i just wanna make sure and im hitting buy it now i needa fix my truck... im sick of the spring shaking

SOMEBODY PLEASE TELL ME THEYLL WORK

ANDREW · 07-04-2010, 12:49 AM

Anyone know

Dapper Dan · 07-04-2010, 10:40 AM

Sorry I don't know. Have you tried contacting the seller and asking for the numbers on the spindle, then you could double check on the web?

SCOTI · 07-04-2010, 02:25 PM

1/2 ton & 3/4 ton spindles are different for 73-87's. That add states "for 1500-2500 series". I would contact them for a p/n & google the p/n for additional info.

ANDREW · 07-04-2010, 07:41 PM

tryed but no responce

SCOTI · 07-05-2010, 12:59 AM

Quote:

Originally Posted by ANDREW

tryed but no responce

If you can't reach them to ask questions, what would you get if there's a problem?

joe231 · 07-05-2010, 01:17 AM

, I would pass...

ANDREW · 07-05-2010, 03:11 AM

hey joe231 are thoes for 3/4 ton trucks too

gchemist · 07-05-2010, 04:07 AM

Measure your rotor. If it is 1.25" thick, yes they fit.

**lolife99** · 07-05-2010, 08:39 AM

Aren't we talking C20 8-lug drop spindles?

I would stick with Belltech or Western Chassis (which CPP sells), McGaughys, or DJM.
Look at Summit Racing's brand, also.
I would buy from a reputable company.

**N2TRUX** · 07-05-2010, 10:11 AM

Quote:

Originally Posted by lolife99

Aren't we talking C20 8-lug drop spindles?.

Yes we are, and NO those will not fit your C-20. The ad should not include the 2500 part, as it is misleading.

joe231 · 07-05-2010, 10:40 AM

Oh, sorry guys
I mis-read
Dis-regard my previous post!

ANDREW · 07-05-2010, 02:05 PM

i found some for my truck but there 3" i was going to get a 2" and cut one coil for a total of 4" but if i buy the 3" i would have to buy a 1" drop coil along with it

**N2TRUX** · 07-05-2010, 04:41 PM

Or you could buy the 3" and cut half a coil. I'm not sure what size tire you plan to run, but a full coil might work...

joe231 · 07-05-2010, 04:59 PM

Quote:

Originally Posted by N2TRUX

Or you could buy the 3" and cut half a coil. I'm not sure what size tire you plan to run, but a full coil might work...

yeah,
what he said

ANDREW · 07-05-2010, 10:54 PM

what do you guys think on these
http://store.kreepinkustumz.net/19chc2losp3d1.html

joe231 · 07-05-2010, 11:10 PM

That's a heck of a price....
I wonder what brand they are?

Wilsonatv · 07-05-2010, 11:21 PM

Seems pretty legit. The about us is a little sketchy but it could just be because they seem to have just started the site.

SCOTI · 07-06-2010, 10:39 AM

Refunds = 20% restocking fee and/or in-store credit only.

ANDREW · 07-06-2010, 02:29 PM

so what do you guys think go for it

SCOTI · 07-06-2010, 03:23 PM

Dont ask us.... ask them. Call & confirm they have exactly what you need. If so, then yes that's a great price. The ad indicates C20-C35 3" drop spindles. Confirm the info & manufacturer of the spindles.

Wilsonatv · 07-06-2010, 03:24 PM

Go for it man. If it goes right Im gonna order spindles also.

ANDREW · 07-06-2010, 04:22 PM

ok guys gave them a call he said it will work for the c20 and the brand name is aim industires?

07-03-2010, 10:06 PM	#1
ANDREW Registered User Join Date: Jul 2007 Location: vannuys Posts: 95	drop spindle HELP!! ok guys so i have a 1983 chevy c20 i need some drop spindles that are 2" drop will these work it says 2500 is that the same as my 3/4 ton c20 http://cgi.ebay.com/ebaymotors/2-1-2...cessories#shId

07-03-2010, 10:09 PM	#2
staggerd86c-10 Squarebody Aficionado Join Date: May 2008 Location: Miami, FL Posts: 713	Re: drop spindle HELP!! I hope they do work out cause thats a really good deal. I think those spindles go for about 350.

07-03-2010, 10:12 PM	#3
ANDREW Registered User Join Date: Jul 2007 Location: vannuys Posts: 95	Re: drop spindle HELP!! i know i mean i just wanna make sure and im hitting buy it now i needa fix my truck... im sick of the spring shaking SOMEBODY PLEASE TELL ME THEYLL WORK Last edited by ANDREW; 07-03-2010 at 10:14 PM.

07-04-2010, 12:49 AM	#4
ANDREW Registered User Join Date: Jul 2007 Location: vannuys Posts: 95	Re: drop spindle HELP!! Anyone know

07-04-2010, 10:40 AM	#5
Dapper Dan Registered User Join Date: Mar 2009 Location: Middle River, MD Posts: 171	Re: drop spindle HELP!! Sorry I don't know. Have you tried contacting the seller and asking for the numbers on the spindle, then you could double check on the web?

07-04-2010, 02:25 PM	#6
SCOTI Registered User Join Date: Apr 2001 Location: DALLAS,TX Posts: 22,064	Re: drop spindle HELP!! 1/2 ton & 3/4 ton spindles are different for 73-87's. That add states "for 1500-2500 series". I would contact them for a p/n & google the p/n for additional info. __________________ 67SWB-B.B.RetroRod 64SWB-Recycle 89CCDually-Driver/Tow Truck 99CCSWB Driver All Fleetsides @rattlecankustoms in IG Building a small, high rpm engine with the perfect bore, stroke and rod ratio is very impressive. It's like a highly skilled Morrocan sword fighter with a Damascus Steel Scimitar..... *Cubic inches is like Indiana Jones with a cheap pistol.*

07-04-2010, 07:41 PM	#7
ANDREW Registered User Join Date: Jul 2007 Location: vannuys Posts: 95	Re: drop spindle HELP!! tryed but no responce

07-05-2010, 01:17 AM	#9
joe231 Registered User Join Date: Dec 2007 Location: Palmer, Alaska Posts: 13,821	Re: drop spindle HELP!! , I would pass... __________________ *CHEVY ONLY* Last edited by joe231; 07-05-2010 at 10:41 AM.

07-05-2010, 03:11 AM	#10
ANDREW Registered User Join Date: Jul 2007 Location: vannuys Posts: 95	Re: drop spindle HELP!! hey joe231 are thoes for 3/4 ton trucks too

07-05-2010, 04:07 AM	#11
gchemist BAD BOW-Silverado XST Join Date: May 2000 Location: Senior Member from Austin, TX Posts: 6,431	Re: drop spindle HELP!! Measure your rotor. If it is 1.25" thick, yes they fit. __________________ Gerardo a.k.a. Mad Chemist Silverado XST videos

07-05-2010, 08:39 AM	#12
lolife99 67-72 parts collector,… Join Date: Nov 2002 Location: Mid-MO Posts: 22,700	Re: drop spindle HELP!! Aren't we talking C20 8-lug drop spindles? I would stick with Belltech or Western Chassis (which CPP sells), McGaughys, or DJM. Look at Summit Racing's brand, also. I would buy from a reputable company. __________________ Keith Convert to disc brakes. http://67-72chevytrucks.com/vboard/s...d.php?t=444823 Last edited by lolife99; 07-05-2010 at 08:40 AM.

07-05-2010, 10:40 AM	#14
joe231 Registered User Join Date: Dec 2007 Location: Palmer, Alaska Posts: 13,821	Re: drop spindle HELP!! Oh, sorry guys I mis-read Dis-regard my previous post! __________________ *CHEVY ONLY*

07-05-2010, 02:05 PM	#15
ANDREW Registered User Join Date: Jul 2007 Location: vannuys Posts: 95	Re: drop spindle HELP!! i found some for my truck but there 3" i was going to get a 2" and cut one coil for a total of 4" but if i buy the 3" i would have to buy a 1" drop coil along with it

07-05-2010, 04:41 PM	#16
N2TRUX Happy to be here Join Date: Mar 2000 Location: Cypress, TX Posts: 39,021	Re: drop spindle HELP!! Or you could buy the 3" and cut half a coil. I'm not sure what size tire you plan to run, but a full coil might work... __________________ Follow me on Facebook and Instagram @N2trux.com Articles- "Jake" the 84 to 74 crewcab "Elwood" the77_Remix 85 GMC Sierra "Scarlett" "Refining Sierra"

07-05-2010, 10:54 PM	#18
ANDREW Registered User Join Date: Jul 2007 Location: vannuys Posts: 95	Re: drop spindle HELP!! what do you guys think on these http://store.kreepinkustumz.net/19chc2losp3d1.html



Register or Log In To remove these advertisements.

07-05-2010, 11:10 PM	#19
joe231 Registered User Join Date: Dec 2007 Location: Palmer, Alaska Posts: 13,821	Re: drop spindle HELP!! That's a heck of a price.... I wonder what brand they are? __________________ *CHEVY ONLY*

07-05-2010, 11:21 PM	#20
Wilsonatv Registered User Join Date: Jun 2010 Location: Vegas Posts: 19	Re: drop spindle HELP!! Seems pretty legit. The about us is a little sketchy but it could just be because they seem to have just started the site.

07-06-2010, 10:39 AM	#21
SCOTI Registered User Join Date: Apr 2001 Location: DALLAS,TX Posts: 22,064	Re: drop spindle HELP!! Refunds = 20% restocking fee and/or in-store credit only. __________________ 67SWB-B.B.RetroRod 64SWB-Recycle 89CCDually-Driver/Tow Truck 99CCSWB Driver All Fleetsides @rattlecankustoms in IG Building a small, high rpm engine with the perfect bore, stroke and rod ratio is very impressive. It's like a highly skilled Morrocan sword fighter with a Damascus Steel Scimitar..... *Cubic inches is like Indiana Jones with a cheap pistol.*

07-06-2010, 02:29 PM	#22
ANDREW Registered User Join Date: Jul 2007 Location: vannuys Posts: 95	Re: drop spindle HELP!! so what do you guys think go for it

07-06-2010, 03:23 PM	#23
SCOTI Registered User Join Date: Apr 2001 Location: DALLAS,TX Posts: 22,064	Re: drop spindle HELP!! Dont ask us.... ask them. Call & confirm they have exactly what you need. If so, then yes that's a great price. The ad indicates C20-C35 3" drop spindles. Confirm the info & manufacturer of the spindles. __________________ 67SWB-B.B.RetroRod 64SWB-Recycle 89CCDually-Driver/Tow Truck 99CCSWB Driver All Fleetsides @rattlecankustoms in IG Building a small, high rpm engine with the perfect bore, stroke and rod ratio is very impressive. It's like a highly skilled Morrocan sword fighter with a Damascus Steel Scimitar..... *Cubic inches is like Indiana Jones with a cheap pistol.*

07-06-2010, 03:24 PM	#24
Wilsonatv Registered User Join Date: Jun 2010 Location: Vegas Posts: 19	Re: drop spindle HELP!! Go for it man. If it goes right Im gonna order spindles also.

07-06-2010, 04:22 PM	#25
ANDREW Registered User Join Date: Jul 2007 Location: vannuys Posts: 95	Re: drop spindle HELP!! ok guys gave them a call he said it will work for the c20 and the brand name is aim industires?

Register or Log In To remove these advertisements.