NC FS/FT SWB, 5 lug frame. - The 1947 - Present Chevrolet & GMC Truck Message Board Network

Dasani · 07-04-2010, 06:51 PM

Okay a few months back I bought this frame from a fellow board member with the intention of using the five-lug stuff on another project. As projects go, I fell into other parts which have changed my course. So back on the market she goes. This is a 71 or 72 SWB frame with a five lug rear and front disc. The frame looks very good, no rust between the rails at the stiffeners and rear cross member; the frame horns also look unmolested as well. The trailing arms look good, no evidence of rust between the sides. It has a power steering box that has been covered or plugged and should be useable. It has all of the brake lines are still intact and attached to the port valve and master cyl. I have good luck selling 5 lug stuff here for almost what I’m asking for this as a roller. I thought I’d put it back on the board before selling it as parts. I would like to get $400.00 for it where it is. I am willing to trade up or down. Dasani

Dasani · 07-04-2010, 06:54 PM

More pics

Dasani · 07-04-2010, 06:55 PM

Pics

Dasani · 07-04-2010, 07:02 PM

Pictures

Quote:

Originally Posted by Dasani

Pics

Dasani · 07-05-2010, 08:20 AM

Ttt

Dasani · 07-06-2010, 08:41 AM

Bump

Dasani · 07-07-2010, 09:08 AM

Ttt

brenthiggins · 07-08-2010, 08:07 PM

Hey man, where are you located, I am in Winston-Salem and would be interested in the frame as is.

Dasani · 07-08-2010, 08:20 PM

Havelock, about two hours east of 95, on 70 between New Bern and Morehead City.

Dasani · 07-11-2010, 08:00 AM

Bump

Dasani · 07-11-2010, 05:27 PM

In two weeks I'm going to pull this one apart. Please don't post here for parts yet, I think I have a local guy wants the front end. This is a nice clean frame however and the trailing arms are nice too.

2manyprojects · 07-13-2010, 04:06 PM

Put me in line. Does it have a trans crossmember? Do you know what gear is in the rear?
How long before you need it moved? I'm on call the next couple weeks and wont be able to get down there right away.

Dasani · 07-13-2010, 06:07 PM

2manyprojects, as it stands you are #1 in line, had a local guy ask for the front 5 lug stuff but, I'm holding out for a bit (it is worth more in parts).
It does not have a trans crosmember, nor does it have engine stands.
I haven't checked the gears, I'll check one day this week and let you know.
Leaving it where it is for a couple of weeks would be no problem and if our schedules work I could bring it to I-95 exit 95(NC) for you for the cost of gas, which would knock four hours off your trip.

Tom

Quote:

Originally Posted by 2manyprojects

Put me in line. Does it have a trans crossmember? Do you know what gear is in the rear?
How long before you need it moved? I'm on call the next couple weeks and wont be able to get down there right away.

2manyprojects · 07-14-2010, 08:26 PM

PM sent

Dasani · 07-14-2010, 09:47 PM

PMed back

Quote:

Originally Posted by 2manyprojects

PM sent

2manyprojects · 07-14-2010, 10:17 PM

I'll take it. The date and gas money amount works for me. I'll let you know if I think of anything else I need. The plan is to put the 67 on it eventually.

Dasani · 07-15-2010, 03:49 AM

See you on the 24th, meet you in Smithfield at the Outlet Mall Just off 95.
How early? I'll be going West to pick up parts.

2manyprojects · 07-15-2010, 01:43 PM

Quote:

Originally Posted by Dasani

See you on the 25th, meet you in Smithfield at the Outlet Mall Just off 95.
How early? I'll be going West to pick up parts.

I just want to make sure we are on the same page. You said Saturday in your PM that is the 24th, Sunday is the 25th. Either day is ok with me. I can be there any time tell me what works for you?

Dasani · 07-15-2010, 03:19 PM

Sorry, the 24th how about 9 A? It is about a 2 hour drive for me.

Tom

2manyprojects · 07-15-2010, 05:20 PM

Quote:

Originally Posted by Dasani

Sorry, the 24th how about 9 A? It is about a 2 hour drive for me.

Tom

Sounds good.

2manyprojects · 07-22-2010, 09:54 PM

Just letting you know I'm still on for Saturday. Where do you want to meet at the outlet mall?
PM sent with my #

Dasani · 07-23-2010, 01:13 AM

PMed same, yes sir, we are still on! I'm leaving here about 6:30, will be in the truck or in Cracker Barrel if you don't see me call. Tom

2manyprojects · 07-23-2010, 06:32 AM

OK see you tomorrow

07-04-2010, 06:54 PM	#2
Dasani Registered User Join Date: Jan 2009 Location: Havelock, NC. Posts: 497	Re: FS/FT SWB, 5 lug frame. More pics Attached Images

07-04-2010, 06:55 PM	#3
Dasani Registered User Join Date: Jan 2009 Location: Havelock, NC. Posts: 497	Re: FS/FT SWB, 5 lug frame. Pics

07-05-2010, 08:20 AM	#5
Dasani Registered User Join Date: Jan 2009 Location: Havelock, NC. Posts: 497	Re: FS/FT SWB, 5 lug frame. Ttt __________________ 68, Anniversary, short-fleet, ground up project. Buddy buckets, tilt, power windows. "GOLDIE" 72, CST 2WD Blazer. Waiting in the “weeds” 68 GMC 1500, LWB Custom, 396/400/Posi, in the same family ‘til now! Driver!

07-06-2010, 08:41 AM	#6
Dasani Registered User Join Date: Jan 2009 Location: Havelock, NC. Posts: 497	Re: FS/FT SWB, 5 lug frame. Bump __________________ 68, Anniversary, short-fleet, ground up project. Buddy buckets, tilt, power windows. "GOLDIE" 72, CST 2WD Blazer. Waiting in the “weeds” 68 GMC 1500, LWB Custom, 396/400/Posi, in the same family ‘til now! Driver!

07-07-2010, 09:08 AM	#7
Dasani Registered User Join Date: Jan 2009 Location: Havelock, NC. Posts: 497	Re: FS/FT SWB, 5 lug frame. Ttt __________________ 68, Anniversary, short-fleet, ground up project. Buddy buckets, tilt, power windows. "GOLDIE" 72, CST 2WD Blazer. Waiting in the “weeds” 68 GMC 1500, LWB Custom, 396/400/Posi, in the same family ‘til now! Driver!

07-04-2010, 06:51 PM	#1
Dasani Registered User Join Date: Jan 2009 Location: Havelock, NC. Posts: 497	FS/FT SWB, 5 lug frame. Okay a few months back I bought this frame from a fellow board member with the intention of using the five-lug stuff on another project. As projects go, I fell into other parts which have changed my course. So back on the market she goes. This is a 71 or 72 SWB frame with a five lug rear and front disc. The frame looks very good, no rust between the rails at the stiffeners and rear cross member; the frame horns also look unmolested as well. The trailing arms look good, no evidence of rust between the sides. It has a power steering box that has been covered or plugged and should be useable. It has all of the brake lines are still intact and attached to the port valve and master cyl. I have good luck selling 5 lug stuff here for almost what I’m asking for this as a roller. I thought I’d put it back on the board before selling it as parts. I would like to get $400.00 for it where it is. I am willing to trade up or down. Dasani Attached Images Last edited by Dasani; 07-13-2010 at 05:39 PM.

07-08-2010, 08:07 PM	#8
brenthiggins Registered User Join Date: Jun 2010 Location: Clemmons, North Carolina Posts: 13	Re: FS/FT SWB, 5 lug frame. Hey man, where are you located, I am in Winston-Salem and would be interested in the frame as is.

07-08-2010, 08:20 PM	#9
Dasani Registered User Join Date: Jan 2009 Location: Havelock, NC. Posts: 497	Re: FS/FT SWB, 5 lug frame. Havelock, about two hours east of 95, on 70 between New Bern and Morehead City. __________________ 68, Anniversary, short-fleet, ground up project. Buddy buckets, tilt, power windows. "GOLDIE" 72, CST 2WD Blazer. Waiting in the “weeds” 68 GMC 1500, LWB Custom, 396/400/Posi, in the same family ‘til now! Driver!

07-11-2010, 08:00 AM	#10
Dasani Registered User Join Date: Jan 2009 Location: Havelock, NC. Posts: 497	Re: FS/FT SWB, 5 lug frame. Bump __________________ 68, Anniversary, short-fleet, ground up project. Buddy buckets, tilt, power windows. "GOLDIE" 72, CST 2WD Blazer. Waiting in the “weeds” 68 GMC 1500, LWB Custom, 396/400/Posi, in the same family ‘til now! Driver!

07-11-2010, 05:27 PM	#11
Dasani Registered User Join Date: Jan 2009 Location: Havelock, NC. Posts: 497	Re: FS/FT SWB, 5 lug frame. In two weeks I'm going to pull this one apart. Please don't post here for parts yet, I think I have a local guy wants the front end. This is a nice clean frame however and the trailing arms are nice too. __________________ 68, Anniversary, short-fleet, ground up project. Buddy buckets, tilt, power windows. "GOLDIE" 72, CST 2WD Blazer. Waiting in the “weeds” 68 GMC 1500, LWB Custom, 396/400/Posi, in the same family ‘til now! Driver!

07-13-2010, 04:06 PM	#12
2manyprojects Registered User Join Date: Feb 2008 Location: Richmond VA Posts: 670	Re: FS/FT SWB, 5 lug frame. Put me in line. Does it have a trans crossmember? Do you know what gear is in the rear? How long before you need it moved? I'm on call the next couple weeks and wont be able to get down there right away.

07-14-2010, 08:26 PM	#14
2manyprojects Registered User Join Date: Feb 2008 Location: Richmond VA Posts: 670	Re: FS/FT SWB, 5 lug frame. PM sent

07-14-2010, 10:17 PM	#16
2manyprojects Registered User Join Date: Feb 2008 Location: Richmond VA Posts: 670	Re: FS/FT SWB, 5 lug frame. I'll take it. The date and gas money amount works for me. I'll let you know if I think of anything else I need. The plan is to put the 67 on it eventually.

07-15-2010, 03:49 AM	#17
Dasani Registered User Join Date: Jan 2009 Location: Havelock, NC. Posts: 497	Re: FS/FT SWB, 5 lug frame. See you on the 24th, meet you in Smithfield at the Outlet Mall Just off 95. How early? I'll be going West to pick up parts. __________________ 68, Anniversary, short-fleet, ground up project. Buddy buckets, tilt, power windows. "GOLDIE" 72, CST 2WD Blazer. Waiting in the “weeds” 68 GMC 1500, LWB Custom, 396/400/Posi, in the same family ‘til now! Driver! Last edited by Dasani; 07-20-2010 at 08:07 PM.

07-15-2010, 03:19 PM	#19
Dasani Registered User Join Date: Jan 2009 Location: Havelock, NC. Posts: 497	Re: FS/FT SWB, 5 lug frame. Sorry, the 24th how about 9 A? It is about a 2 hour drive for me. Tom __________________ 68, Anniversary, short-fleet, ground up project. Buddy buckets, tilt, power windows. "GOLDIE" 72, CST 2WD Blazer. Waiting in the “weeds” 68 GMC 1500, LWB Custom, 396/400/Posi, in the same family ‘til now! Driver!



Register or Log In To remove these advertisements.

07-22-2010, 09:54 PM	#21
2manyprojects Registered User Join Date: Feb 2008 Location: Richmond VA Posts: 670	Re: FS/FT SWB, 5 lug frame. Just letting you know I'm still on for Saturday. Where do you want to meet at the outlet mall? PM sent with my #

07-23-2010, 01:13 AM	#22
Dasani Registered User Join Date: Jan 2009 Location: Havelock, NC. Posts: 497	Re: FS/FT SWB, 5 lug frame. PMed same, yes sir, we are still on! I'm leaving here about 6:30, will be in the truck or in Cracker Barrel if you don't see me call. Tom __________________ 68, Anniversary, short-fleet, ground up project. Buddy buckets, tilt, power windows. "GOLDIE" 72, CST 2WD Blazer. Waiting in the “weeds” 68 GMC 1500, LWB Custom, 396/400/Posi, in the same family ‘til now! Driver!

07-23-2010, 06:32 AM	#23
2manyprojects Registered User Join Date: Feb 2008 Location: Richmond VA Posts: 670	Re: FS/FT SWB, 5 lug frame. OK see you tomorrow

Register or Log In To remove these advertisements.