TX WTB: Wood floor cross sills. - The 1947 - Present Chevrolet & GMC Truck Message Board Network

jorgensensc · 07-07-2010, 03:59 PM

Hey all.
I need to find both of the cross sills for a long bed wood floor that go before and after the wheel wells. If. Possible I could also use the last cross sill that goes right in front of the tailgate ( the big one that is tach welded to the bedsides) the ones on the truck I'm working on are rusted through. Prefer local, but will consider anything.
Thanks!
Shawn

Mt Man Chad · 07-07-2010, 04:14 PM

I have a few originals.
I hope to be home this week after 5 weeks on the road, I'll take some pics.

extd56 · 07-07-2010, 05:01 PM

I have 2 sets of the bed cross sills if Mt Man Chad can't help

jorgensensc · 07-07-2010, 08:29 PM

Sounds good guys. Any idea what I'm looking at pricewise shipped to 77018?
Thanks!
Shawn

67Mach1 · 07-07-2010, 10:28 PM

I've got a complete bed you can come get for 100 bucks. Long bed with wood floor, well mostly rotted wood floor.

Looked to be all there. We did torch the bolts off so you may want photos and it will take about one or two weekends to get that.

Located in or around College Station TX.

PM for more information if you need/ want.

extd56 · 07-08-2010, 08:16 PM

Here are a few pictures of what I have got. Not sure what it would cost to ship to you.

jorgensensc · 07-10-2010, 10:52 AM

Can you get me a price shipped to 77018.
Shawn

extd56 · 07-12-2010, 12:09 PM

100.00 shipped, let me know if that is the right ones you are looking for as I have more.

jorgensensc · 07-14-2010, 01:20 PM

Those look like they will work. Just to make sure, there are three different ones right? The one on each side of the wheel wells, and I see the last one by the tailgate. Also, that is just surface rust right, it's not rusted out is it? I can't tell in the pics. If it's just surfce rust I can paypal you the money.
Thanks!
Shawn

extd56 · 07-14-2010, 07:10 PM

It is not rusted out or I would have thrown it away. I will take soem better pictures. Can you make sure from someone on the board the correct ones for the ones by the wheelwells, I believe they are the small ones but want to make sure and I don't have a truck with a wood bed at the moment.

jorgensensc · 07-18-2010, 03:12 PM

Sorry I've been swamped at work. I know the thin one ( 1" tall) is the right one, and the back one by the bed end is correct. The one on the other side of the wheel well is identical to three of the other ones. The "pads" are 19" from the end of the sill. There is one sill that has the "pad" considerably less than 19". I need one of the 4 that is identical. Does that make any sense?
Shawn

extd56 · 07-18-2010, 05:32 PM

I think the other one that you are looking for are the ones in the far left in the picture.

jorgensensc · 07-18-2010, 05:46 PM

I think the ones that you have the most of is the one that I need. Are the pads on those 19" from the ends? If they are it is the right one.

jorgensensc · 07-18-2010, 05:56 PM

After looking again at the pics I am 99% sure that is one of the ones I need.
So I need:
1 end cross sill by the tailgate
1 of the short ones ( 1" tall)
1 of the ones out of the big stack (19" pad from the end)

extd56 · 07-18-2010, 07:14 PM

I took a measurement and most of them are 19"from the edge of the pad to the end or 20" from the center of the bolt hole to the end.

bguild · 10-01-2010, 11:38 AM

Extd56 If you still have any and jorgensensc backs out let me know. I need some as well.

extd56 · 10-01-2010, 07:02 PM

I dont' have any left but if I get more I will let you know.

07-07-2010, 03:59 PM	#1
jorgensensc Registered User Join Date: Jul 2003 Location: Cypress, Tx Posts: 4,005	WTB: Wood floor cross sills. Hey all. I need to find both of the cross sills for a long bed wood floor that go before and after the wheel wells. If. Possible I could also use the last cross sill that goes right in front of the tailgate ( the big one that is tach welded to the bedsides) the ones on the truck I'm working on are rusted through. Prefer local, but will consider anything. Thanks! Shawn __________________ 1972 C20 Suburban- Big Blue Betty '56 Chevy Bel Air Sedan- Frame up Restoration -What would you attempt to achieve if you knew you could not fail?- -I Refuse To Tiptoe Through Life, Only To Arrive Safely At Death's Door- R.I.P. EAST SIDE LOW LIFE

07-07-2010, 04:14 PM	#2
Mt Man Chad Registered User Join Date: Oct 2006 Location: Oakridge Oregon Posts: 1,865	Re: WTB: Wood floor cross sills. I have a few originals. I hope to be home this week after 5 weeks on the road, I'll take some pics. __________________ 68 CST SWB - Gold/White 50th anniversary /TH350/Buddy Buckets/3.73 Posi/dogdish caps. 68 K10 Burb - Gold/White 327/SM465/NP205/3.73 "Daa Burb" build thread

07-07-2010, 05:01 PM	#3
extd56 Senior Member Join Date: Nov 2004 Location: Vacaville, CA Posts: 2,272	Re: WTB: Wood floor cross sills. I have 2 sets of the bed cross sills if Mt Man Chad can't help

07-07-2010, 08:29 PM	#4
jorgensensc Registered User Join Date: Jul 2003 Location: Cypress, Tx Posts: 4,005	Re: WTB: Wood floor cross sills. Sounds good guys. Any idea what I'm looking at pricewise shipped to 77018? Thanks! Shawn __________________ 1972 C20 Suburban- Big Blue Betty '56 Chevy Bel Air Sedan- Frame up Restoration -What would you attempt to achieve if you knew you could not fail?- -I Refuse To Tiptoe Through Life, Only To Arrive Safely At Death's Door- R.I.P. EAST SIDE LOW LIFE

07-07-2010, 10:28 PM	#5
67Mach1 Senior Member Join Date: Nov 2005 Location: Round Rock, TX Posts: 1,100	Re: WTB: Wood floor cross sills. I've got a complete bed you can come get for 100 bucks. Long bed with wood floor, well mostly rotted wood floor. Looked to be all there. We did torch the bolts off so you may want photos and it will take about one or two weekends to get that. Located in or around College Station TX. PM for more information if you need/ want. __________________ Soon to be selling all but one, or two... Depends on what the Boss has to say....... 67 GMC Shortbed 454 Project more junk and most of it is for sale Last edited by 67Mach1; 07-07-2010 at 10:28 PM.

07-08-2010, 08:16 PM	#6
extd56 Senior Member Join Date: Nov 2004 Location: Vacaville, CA Posts: 2,272	Re: WTB: Wood floor cross sills. Here are a few pictures of what I have got. Not sure what it would cost to ship to you. Attached Images Last edited by extd56; 07-08-2010 at 08:17 PM.

07-10-2010, 10:52 AM	#7
jorgensensc Registered User Join Date: Jul 2003 Location: Cypress, Tx Posts: 4,005	Re: WTB: Wood floor cross sills. Can you get me a price shipped to 77018. Shawn __________________ 1972 C20 Suburban- Big Blue Betty '56 Chevy Bel Air Sedan- Frame up Restoration -What would you attempt to achieve if you knew you could not fail?- -I Refuse To Tiptoe Through Life, Only To Arrive Safely At Death's Door- R.I.P. EAST SIDE LOW LIFE

07-12-2010, 12:09 PM	#8
extd56 Senior Member Join Date: Nov 2004 Location: Vacaville, CA Posts: 2,272	Re: WTB: Wood floor cross sills. 100.00 shipped, let me know if that is the right ones you are looking for as I have more.

07-14-2010, 01:20 PM	#9
jorgensensc Registered User Join Date: Jul 2003 Location: Cypress, Tx Posts: 4,005	Re: WTB: Wood floor cross sills. Those look like they will work. Just to make sure, there are three different ones right? The one on each side of the wheel wells, and I see the last one by the tailgate. Also, that is just surface rust right, it's not rusted out is it? I can't tell in the pics. If it's just surfce rust I can paypal you the money. Thanks! Shawn __________________ 1972 C20 Suburban- Big Blue Betty '56 Chevy Bel Air Sedan- Frame up Restoration -What would you attempt to achieve if you knew you could not fail?- -I Refuse To Tiptoe Through Life, Only To Arrive Safely At Death's Door- R.I.P. EAST SIDE LOW LIFE

07-14-2010, 07:10 PM	#10
extd56 Senior Member Join Date: Nov 2004 Location: Vacaville, CA Posts: 2,272	Re: WTB: Wood floor cross sills. It is not rusted out or I would have thrown it away. I will take soem better pictures. Can you make sure from someone on the board the correct ones for the ones by the wheelwells, I believe they are the small ones but want to make sure and I don't have a truck with a wood bed at the moment.

07-18-2010, 03:12 PM	#11
jorgensensc Registered User Join Date: Jul 2003 Location: Cypress, Tx Posts: 4,005	Re: WTB: Wood floor cross sills. Sorry I've been swamped at work. I know the thin one ( 1" tall) is the right one, and the back one by the bed end is correct. The one on the other side of the wheel well is identical to three of the other ones. The "pads" are 19" from the end of the sill. There is one sill that has the "pad" considerably less than 19". I need one of the 4 that is identical. Does that make any sense? Shawn __________________ 1972 C20 Suburban- Big Blue Betty '56 Chevy Bel Air Sedan- Frame up Restoration -What would you attempt to achieve if you knew you could not fail?- -I Refuse To Tiptoe Through Life, Only To Arrive Safely At Death's Door- R.I.P. EAST SIDE LOW LIFE

07-18-2010, 05:32 PM	#12
extd56 Senior Member Join Date: Nov 2004 Location: Vacaville, CA Posts: 2,272	Re: WTB: Wood floor cross sills. I think the other one that you are looking for are the ones in the far left in the picture. Attached Images Last edited by extd56; 07-18-2010 at 05:34 PM.

07-18-2010, 05:46 PM	#13
jorgensensc Registered User Join Date: Jul 2003 Location: Cypress, Tx Posts: 4,005	Re: WTB: Wood floor cross sills. I think the ones that you have the most of is the one that I need. Are the pads on those 19" from the ends? If they are it is the right one. __________________ 1972 C20 Suburban- Big Blue Betty '56 Chevy Bel Air Sedan- Frame up Restoration -What would you attempt to achieve if you knew you could not fail?- -I Refuse To Tiptoe Through Life, Only To Arrive Safely At Death's Door- R.I.P. EAST SIDE LOW LIFE

07-18-2010, 05:56 PM	#14
jorgensensc Registered User Join Date: Jul 2003 Location: Cypress, Tx Posts: 4,005	Re: WTB: Wood floor cross sills. After looking again at the pics I am 99% sure that is one of the ones I need. So I need: 1 end cross sill by the tailgate 1 of the short ones ( 1" tall) 1 of the ones out of the big stack (19" pad from the end) __________________ 1972 C20 Suburban- Big Blue Betty '56 Chevy Bel Air Sedan- Frame up Restoration -What would you attempt to achieve if you knew you could not fail?- -I Refuse To Tiptoe Through Life, Only To Arrive Safely At Death's Door- R.I.P. EAST SIDE LOW LIFE

07-18-2010, 07:14 PM	#15
extd56 Senior Member Join Date: Nov 2004 Location: Vacaville, CA Posts: 2,272	Re: WTB: Wood floor cross sills. I took a measurement and most of them are 19"from the edge of the pad to the end or 20" from the center of the bolt hole to the end.



Register or Log In To remove these advertisements.

10-01-2010, 11:38 AM	#16
bguild Registered User Join Date: Mar 2008 Location: kansas city mo Posts: 898	Re: WTB: Wood floor cross sills. Extd56 If you still have any and jorgensensc backs out let me know. I need some as well. __________________ Project "Edna Marie"http://www.67-72chevytrucks.com/vboa...74#post5998074 Toys: 2014 Dodge Ram 1967 SHORTBED

10-01-2010, 07:02 PM	#17
extd56 Senior Member Join Date: Nov 2004 Location: Vacaville, CA Posts: 2,272	Re: WTB: Wood floor cross sills. I dont' have any left but if I get more I will let you know.

Register or Log In To remove these advertisements.