Header plugs - The 1947 - Present Chevrolet & GMC Truck Message Board Network

marks1972 · 07-10-2010, 10:47 AM

I instaled a set of accel header plugs last night. They make a big difrence. About a half an inch. My plug wires used to be right next to the headers but with these shorter plugs now my wires are about a half inch away from the pipes on my headers. I would difenatly suggest these to anyone running headers. They only cost $30 at orillys auto they Cary them at most auto part stores.

davebloomer · 07-10-2010, 01:12 PM

I just did a head swap and I had to use 2 of these because the heads have the plugs in a different location and the wire would have been sitting directly on the header but they fit the bill perfectly.

marks1972 · 07-11-2010, 10:48 AM

they came in a pack of 8 so i just used all of them. besides i dont like to miss match plugs.

vasquezmrysvll · 07-11-2010, 01:13 PM

interesting.... do they have a set for vortecs? hhmmmmmmm.......

big mike71 · 07-11-2010, 03:52 PM

Quote:

Originally Posted by vasquezmrysvll

interesting.... do they have a set for vortecs? hhmmmmmmm.......

Last time I tried they did not. The only ones I could find were in Jegs catalog and they were $15.00 apiece.

vasquezmrysvll · 07-11-2010, 04:12 PM

15 is kinda steep thanks for the info

marks1972 · 07-11-2010, 05:59 PM

like i said i only payed $30 for the whole set of 8. i have seen them in o'rilleys (where i got mine), autozone, and advanced auto. they where all about the same i just got mine at o'rilleys becouse that is where i happend to be getting something else. they where on the wall with all the other accel stuff and the crome stuff.

marks1972 · 07-11-2010, 06:08 PM

this is a picture after being instald. sorry i dont have a before picture that i am aware of. but if you look at the header you will see a mark. that is where the wire was right next to it with the old plug.

big mike71 · 07-11-2010, 06:10 PM

Do you have vortec heads?

'72customdeluxe · 07-11-2010, 06:17 PM

Just for another option, ngk's are short as well and cheaper

marks1972 · 07-11-2010, 06:25 PM

no mine are just the standard old school chevy heads. on the conversion chart the ones i got are compatable to:

AC R44TS / R45TS / CR45TS / AND 41-905

it has other bands on there to

there was another pack that said R43 that is all i remember

not sure what plugs vortec heads take

**El Jay** · 07-11-2010, 06:38 PM

I run ACCEL Shorty plugs too.

I ordered mine from board member Mike's Bump & Grind Garage.

The total cost of the plugs, and delivery to my front door, was less than buying them locally.
All I can say is, "Great service."

07-10-2010, 10:47 AM	#1
marks1972 Registered User Join Date: May 2010 Location: Atoka, TN Posts: 240	Header plugs I instaled a set of accel header plugs last night. They make a big difrence. About a half an inch. My plug wires used to be right next to the headers but with these shorter plugs now my wires are about a half inch away from the pipes on my headers. I would difenatly suggest these to anyone running headers. They only cost $30 at orillys auto they Cary them at most auto part stores. __________________ Mark 1968 C-10 SWB 307/munci 4spd/411possi 1986-1990 1972 Cheyenne-10 LWB 350/TH350 IF SHE WHOULD HAVE KEEPT THE SHIRT ON THEY WOULDNT HAVE BROKEN UP THANKS ADAM SANDLER U. S. Navy Seabee "CAN DO", "The difficult we do at once. The impossible may take a little bit longer.","We Build We Fight", "Work Hard Play Hard"

07-10-2010, 01:12 PM	#2
davebloomer Registered User Join Date: Apr 2009 Location: Weatherford, OK Posts: 220	Re: Header plugs I just did a head swap and I had to use 2 of these because the heads have the plugs in a different location and the wire would have been sitting directly on the header but they fit the bill perfectly.

07-11-2010, 10:48 AM	#3
marks1972 Registered User Join Date: May 2010 Location: Atoka, TN Posts: 240	Re: Header plugs they came in a pack of 8 so i just used all of them. besides i dont like to miss match plugs. __________________ Mark 1968 C-10 SWB 307/munci 4spd/411possi 1986-1990 1972 Cheyenne-10 LWB 350/TH350 IF SHE WHOULD HAVE KEEPT THE SHIRT ON THEY WOULDNT HAVE BROKEN UP THANKS ADAM SANDLER U. S. Navy Seabee "CAN DO", "The difficult we do at once. The impossible may take a little bit longer.","We Build We Fight", "Work Hard Play Hard"

07-11-2010, 01:13 PM	#4
vasquezmrysvll "the other guy" Join Date: Oct 2008 Location: Olivehurst California 95961 Posts: 901	Re: Header plugs interesting.... do they have a set for vortecs? hhmmmmmmm....... __________________ God Said,"Building A 10 Second Import Is Like Coming Out Of The Closet, In The End Ur Still....."EXPLETIVE"

07-11-2010, 04:12 PM	#6
vasquezmrysvll "the other guy" Join Date: Oct 2008 Location: Olivehurst California 95961 Posts: 901	Re: Header plugs 15 is kinda steep thanks for the info __________________ God Said,"Building A 10 Second Import Is Like Coming Out Of The Closet, In The End Ur Still....."EXPLETIVE"

07-11-2010, 05:59 PM	#7
marks1972 Registered User Join Date: May 2010 Location: Atoka, TN Posts: 240	Re: Header plugs like i said i only payed $30 for the whole set of 8. i have seen them in o'rilleys (where i got mine), autozone, and advanced auto. they where all about the same i just got mine at o'rilleys becouse that is where i happend to be getting something else. they where on the wall with all the other accel stuff and the crome stuff. __________________ Mark 1968 C-10 SWB 307/munci 4spd/411possi 1986-1990 1972 Cheyenne-10 LWB 350/TH350 IF SHE WHOULD HAVE KEEPT THE SHIRT ON THEY WOULDNT HAVE BROKEN UP THANKS ADAM SANDLER U. S. Navy Seabee "CAN DO", "The difficult we do at once. The impossible may take a little bit longer.","We Build We Fight", "Work Hard Play Hard"

07-11-2010, 06:08 PM	#8
marks1972 Registered User Join Date: May 2010 Location: Atoka, TN Posts: 240	Re: Header plugs this is a picture after being instald. sorry i dont have a before picture that i am aware of. but if you look at the header you will see a mark. that is where the wire was right next to it with the old plug. Attached Images __________________ Mark 1968 C-10 SWB 307/munci 4spd/411possi 1986-1990 1972 Cheyenne-10 LWB 350/TH350 IF SHE WHOULD HAVE KEEPT THE SHIRT ON THEY WOULDNT HAVE BROKEN UP THANKS ADAM SANDLER U. S. Navy Seabee "CAN DO", "The difficult we do at once. The impossible may take a little bit longer.","We Build We Fight", "Work Hard Play Hard"

07-11-2010, 06:10 PM	#9
big mike71 Registered User Join Date: Mar 2009 Location: independence mo Posts: 2,111	Re: Header plugs Do you have vortec heads? __________________ I'm not as good as I once was, But I'm as good once as I ever was.

07-11-2010, 06:17 PM	#10
'72customdeluxe Registered User Join Date: Jan 2008 Location: Tejas Posts: 691	Re: Header plugs Just for another option, ngk's are short as well and cheaper __________________ '72 cheyenne super step, '05 long bed gmc

07-11-2010, 06:25 PM	#11
marks1972 Registered User Join Date: May 2010 Location: Atoka, TN Posts: 240	Re: Header plugs no mine are just the standard old school chevy heads. on the conversion chart the ones i got are compatable to: AC R44TS / R45TS / CR45TS / AND 41-905 it has other bands on there to there was another pack that said R43 that is all i remember not sure what plugs vortec heads take __________________ Mark 1968 C-10 SWB 307/munci 4spd/411possi 1986-1990 1972 Cheyenne-10 LWB 350/TH350 IF SHE WHOULD HAVE KEEPT THE SHIRT ON THEY WOULDNT HAVE BROKEN UP THANKS ADAM SANDLER U. S. Navy Seabee "CAN DO", "The difficult we do at once. The impossible may take a little bit longer.","We Build We Fight", "Work Hard Play Hard"

07-11-2010, 06:38 PM	#12
El Jay Gone to greener pastures Join Date: May 2007 Location: Gateway to the Delta Posts: 7,354	Re: Header plugs I run ACCEL Shorty plugs too. I ordered mine from board member Mike's Bump & Grind Garage. The total cost of the plugs, and delivery to my front door, was less than buying them locally. All I can say is, "Great service." __________________ '69 Chevy 1/2 T LWB Stepper: Daily Beater '72 GMC 3/4 T Fleet: Another Daily Beater '72 Plymouth Gran Coupe: ? "Ah women. They make the highs higher and the lows more frequent." Friedrich Nietzsche "Never kick a fresh turd on a hot day." Harry S. Truman GUN CONTROL: Never having to say, "I missed you." Always fire two warning shots into your attacker's chest area before putting a bullet between his eyes. Paraphrased from Louis Awerbuck



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.