IL Cab w/title $350 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

deek114 · 07-21-2010, 01:48 PM

I have a 72 cab that has been worked on. It has a good IN 72 GMC title with the VIN Tags. The VIN is a V8 truck vin if that helps.

Condition:
The cab currently does not have cab corners, but the rockers have been replaced and the floor was patched. The cab was taken down to the metal, and not painted so there is surface rust from sitting in a garage. I palm sanded some of it and sprayed primer on the metal.

The pics arent that great, I have no room in the garage and its too dark for the camera to focus.

**Dieselwrencher** · 07-21-2010, 04:58 PM

How are under the floors? Cab supports, and such. And how about around the windshield area? Any rust? I'm looking for a better cab for the 69 and I'm interested. Thanks Ryan.

deek114 · 07-22-2010, 12:15 PM

The floors are pretty good. There is rust, not bad just on the surface. Also in my first post I forget to mention there is on spot on the drivers side floor that still needs a patch. I took a pic.

While I was trying to get pictures of under the truck I found a problem I didnt realize it had. On the inside of the cab near where the rear view mirror mounts the cab has rusted threw. I have a picture of it I will post.

The metal the goes around the windshield is in good shape no problems there.

Now that I found that new rust spot Im not really sure what to the cab is really worth. I do not want to rip anyone off, but I still would like to get some of my money back out of it. If anyone has an opinion of what its worth feel free to pm me or just leave a post in this thread.

deek114 · 07-22-2010, 12:37 PM

I would consider trades. I do need a gmc tailgate, a black bench seat, or even buddy buckets if you are willing to trade them. I dont have any funds in the wishing well so no trades plus cash on my side. Anyway tell me what you got.

**Dieselwrencher** · 07-22-2010, 05:08 PM

I think I'll pass. Thanks though.

diggertodd · 07-22-2010, 09:36 PM

Thought I would see if you have the 72 frame/chassis
you are selling as well?

deek114 · 07-23-2010, 12:53 PM

No 72s, I have a 69 short bed chasis that has been sand blasted, and powder coated. It is complete minus springs. Also have a 68 lwb 3/4 ton chasis complete. Its really nice for a untouched frame. It came from arizona so its not as rusted as we are used to here in IL.

deek114 · 07-25-2010, 06:47 PM

ttt

deek114 · 08-07-2010, 09:11 PM

pics of bottom of cab looks like inner rockers have been replaced. its outside now so it needs a home. shoot me offers, and you can have it as soon as you get here.

deek114 · 08-09-2010, 12:37 PM

Make an offer. I want it gone by the end of the weekend. Just pm me and we can make a deal

deek114 · 08-09-2010, 08:31 PM

will consider all trades. i need a gmc tailgate

truck-collector · 08-14-2010, 10:21 PM

I have a solid GMC tailgate (67-72 style is what you need Im assuming?). It came off my 68 Chevy project. There are a few small screw holes from where it appears someone screwed a tailgate trim panel over the gmc name. Its straight and I can send you some pics. Thers a lot of surface rust on it though. Are you willing to work a deal for your cab with title? Do you need any other odds and ends? I have a 71 k20 Im parting out. the body is junk but there are a lot of odds and ends.

deek114 · 08-15-2010, 12:17 AM

Quote:

Originally Posted by truck-collector

I have a solid GMC tailgate (67-72 style is what you need Im assuming?). It came off my 68 Chevy project. There are a few small screw holes from where it appears someone screwed a tailgate trim panel over the gmc name. Its straight and I can send you some pics. Thers a lot of surface rust on it though. Are you willing to work a deal for your cab with title? Do you need any other odds and ends? I have a 71 k20 Im parting out. the body is junk but there are a lot of odds and ends.

yeah if you could send me some pics deek114@hotmail.com and let me know what else you have. Im sure we can make some kind of deal.

deek114 · 08-20-2010, 12:31 PM

Lowered price $150

Rob68c10 · 08-21-2010, 03:41 PM

Could you take some pictures of the roof line? Is it rusted?

deek114 · 08-21-2010, 08:37 PM

Yeah I will take pictures of the top and post them. It may be a day or two, but I will get them up. The top is not rusted. The drip rail is all solid.

deek114 · 08-24-2010, 09:13 PM

SOLD! local guy ive been talkin to came by and got it today

07-21-2010, 01:48 PM	#1
deek114 Registered User Join Date: Jan 2009 Location: decatur, IL. Posts: 162	Cab w/title $300 OBO I have a 72 cab that has been worked on. It has a good IN 72 GMC title with the VIN Tags. The VIN is a V8 truck vin if that helps. Condition: The cab currently does not have cab corners, but the rockers have been replaced and the floor was patched. The cab was taken down to the metal, and not painted so there is surface rust from sitting in a garage. I palm sanded some of it and sprayed primer on the metal. The pics arent that great, I have no room in the garage and its too dark for the camera to focus. Attached Images __________________ Friends don't let friends drive fords. Last edited by deek114; 08-09-2010 at 12:40 PM.

07-21-2010, 04:58 PM	#2
Dieselwrencher 6>8 Plugless........ Join Date: Sep 2007 Location: Prairie City, Ia Posts: 17,140	Re: Cab w/title $350 How are under the floors? Cab supports, and such. And how about around the windshield area? Any rust? I'm looking for a better cab for the 69 and I'm interested. Thanks Ryan. __________________ Ryan 1972 Chevy Longhorn K30 Cheyenne Super, 359 Inline 6 cylinder, Auto Trans, Tilt, Diesel Tach/Vach, Buckets, Rare Rear 4-link and air ride option Build Thread 1972 GMC Sierra Grande Longhorn 4x4 1972 Chevy Cheyenne Super K20 Long Step side tilt, tach, tow hooks, AC, 350 4 speed 1972 C10 Suburban Custom Deluxe 1969 Chevy milk truck 1971 Camaro RS 5.3 BTR STG3 Cam Super T10 1940 Ford 354 Hemi 46RH Ford 9" on air ride huge project *Tired of spark plugs? Check this out.*

07-22-2010, 12:15 PM	#3
deek114 Registered User Join Date: Jan 2009 Location: decatur, IL. Posts: 162	Re: Cab w/title $350 The floors are pretty good. There is rust, not bad just on the surface. Also in my first post I forget to mention there is on spot on the drivers side floor that still needs a patch. I took a pic. While I was trying to get pictures of under the truck I found a problem I didnt realize it had. On the inside of the cab near where the rear view mirror mounts the cab has rusted threw. I have a picture of it I will post. The metal the goes around the windshield is in good shape no problems there. Now that I found that new rust spot Im not really sure what to the cab is really worth. I do not want to rip anyone off, but I still would like to get some of my money back out of it. If anyone has an opinion of what its worth feel free to pm me or just leave a post in this thread. Attached Images __________________ Friends don't let friends drive fords.

07-22-2010, 12:37 PM	#4
deek114 Registered User Join Date: Jan 2009 Location: decatur, IL. Posts: 162	Re: Cab w/title $300 OBO I would consider trades. I do need a gmc tailgate, a black bench seat, or even buddy buckets if you are willing to trade them. I dont have any funds in the wishing well so no trades plus cash on my side. Anyway tell me what you got. __________________ Friends don't let friends drive fords. Last edited by deek114; 08-09-2010 at 12:41 PM.

07-22-2010, 05:08 PM	#5
Dieselwrencher 6>8 Plugless........ Join Date: Sep 2007 Location: Prairie City, Ia Posts: 17,140	Re: Cab w/title $350 I think I'll pass. Thanks though. __________________ Ryan 1972 Chevy Longhorn K30 Cheyenne Super, 359 Inline 6 cylinder, Auto Trans, Tilt, Diesel Tach/Vach, Buckets, Rare Rear 4-link and air ride option Build Thread 1972 GMC Sierra Grande Longhorn 4x4 1972 Chevy Cheyenne Super K20 Long Step side tilt, tach, tow hooks, AC, 350 4 speed 1972 C10 Suburban Custom Deluxe 1969 Chevy milk truck 1971 Camaro RS 5.3 BTR STG3 Cam Super T10 1940 Ford 354 Hemi 46RH Ford 9" on air ride huge project *Tired of spark plugs? Check this out.*

07-22-2010, 09:36 PM	#6
diggertodd diggertodd Join Date: May 2005 Location: Athens, Illinois Posts: 132	Re: Cab w/title $350 Thought I would see if you have the 72 frame/chassis you are selling as well? __________________ - Todd Silvey

07-23-2010, 12:53 PM	#7
deek114 Registered User Join Date: Jan 2009 Location: decatur, IL. Posts: 162	Re: Cab w/title $300 OBO No 72s, I have a 69 short bed chasis that has been sand blasted, and powder coated. It is complete minus springs. Also have a 68 lwb 3/4 ton chasis complete. Its really nice for a untouched frame. It came from arizona so its not as rusted as we are used to here in IL. __________________ Friends don't let friends drive fords. Last edited by deek114; 08-09-2010 at 12:41 PM.

07-25-2010, 06:47 PM	#8
deek114 Registered User Join Date: Jan 2009 Location: decatur, IL. Posts: 162	Re: Cab w/title $300 OBO ttt __________________ Friends don't let friends drive fords. Last edited by deek114; 08-09-2010 at 12:41 PM.

08-07-2010, 09:11 PM	#9
deek114 Registered User Join Date: Jan 2009 Location: decatur, IL. Posts: 162	Re: Cab w/title $300 OBO pics of bottom of cab looks like inner rockers have been replaced. its outside now so it needs a home. shoot me offers, and you can have it as soon as you get here. Attached Images __________________ Friends don't let friends drive fords.

08-09-2010, 12:37 PM	#10
deek114 Registered User Join Date: Jan 2009 Location: decatur, IL. Posts: 162	Re: Cab w/title $300 OBO Make an offer. I want it gone by the end of the weekend. Just pm me and we can make a deal __________________ Friends don't let friends drive fords. Last edited by deek114; 08-09-2010 at 12:37 PM.

08-09-2010, 08:31 PM	#11
deek114 Registered User Join Date: Jan 2009 Location: decatur, IL. Posts: 162	Re: Cab w/title $300 OBO will consider all trades. i need a gmc tailgate __________________ Friends don't let friends drive fords. Last edited by deek114; 08-09-2010 at 08:32 PM.

08-14-2010, 10:21 PM	#12
truck-collector Registered User Join Date: May 2010 Location: Beaverton, MI Posts: 14	Re: Cab w/title $350 I have a solid GMC tailgate (67-72 style is what you need Im assuming?). It came off my 68 Chevy project. There are a few small screw holes from where it appears someone screwed a tailgate trim panel over the gmc name. Its straight and I can send you some pics. Thers a lot of surface rust on it though. Are you willing to work a deal for your cab with title? Do you need any other odds and ends? I have a 71 k20 Im parting out. the body is junk but there are a lot of odds and ends.

08-20-2010, 12:31 PM	#14
deek114 Registered User Join Date: Jan 2009 Location: decatur, IL. Posts: 162	Re: Cab w/title $150 Lowered price $150 __________________ Friends don't let friends drive fords.

08-21-2010, 03:41 PM	#15
Rob68c10 Registered User Join Date: Mar 2010 Location: Eastern Shore, Maryland Posts: 159	Re: Cab w/title $350 Could you take some pictures of the roof line? Is it rusted?

08-21-2010, 08:37 PM	#16
deek114 Registered User Join Date: Jan 2009 Location: decatur, IL. Posts: 162	Re: Cab w/title $350 Yeah I will take pictures of the top and post them. It may be a day or two, but I will get them up. The top is not rusted. The drip rail is all solid. __________________ Friends don't let friends drive fords.



Register or Log In To remove these advertisements.

08-24-2010, 09:13 PM	#17
deek114 Registered User Join Date: Jan 2009 Location: decatur, IL. Posts: 162	Re: Cab w/title $350 SOLD! local guy ive been talkin to came by and got it today __________________ Friends don't let friends drive fords.

Register or Log In To remove these advertisements.