RI 1987 GMC K2500 P/U Project

[arkracing]

I have an '87 GMC K2500 Project truck. I'm not going to be getting to it anytime soon and could use the cash right now.

*The cab needs: Drivers floor pan, rockers and cab corners. The firewall seem is perfect. Doors are original GM, dented but not rotted. I have a set of A/M doors as well.
*I have the rockers and cab corners - I don't have the floor pan

*The Bed has absolutly NO Rot! all cross sills are good, all wheel openings/inner wheelhouses are perfect. Bed has some dents etc, but is about the best that I've seen for around here. There is a hole in the floor it was cut out for an air hose - it's not a rot hole.

*Nose is marginal. I have a '89 Chevy Blazer nose that I will include that has 2 great fenders, radiator support, grille etc etc. The hood is GM and has one small dent towards the front.

*I have an early chevy gate that is just about perfect.

*Good front bumper
*Good rear painted step bumper

*Tanks are in good shape and not rotted.
*All the original brake and fuel lines are on the truck and in good shape
*Interior is shot
*I have a tilt column from the '89 blazer to replace the non-tilt.

*Chassis is about as perfect as I've ever seen on a 4x4 - still has factory black paint on it.
* I have a set of factory front tow hooks for it as well.

*10b front end and a 14bsf rear end with 4.10 gears.

*TBI350/TH400/NP208 - The motor runs, but I think the PO put a non-computer campatible cam in it and it won't idle. Trans DOES NOT MOVE. I can get another one (used) for a little extra. I was going to have this one rebuilt.

$900 obo buys what's listed above.

I have a set of 1tons D60 Front SRW in nice shape & a 14bFF out of a 3/4ton with the small brakes. I'll let them go with the truck for a package price of $1600 - the front end alone should be worth $800.

I can get a used TH400 trans for $250 extra if that helps.

Feel free to ask questions. etc. etc. as there is probably stuff that I'm forgetting. I included a pic of the Blazer that the nose came from - the blazer is history.

[STOCKISH]

Looks good. Any pics of the 60 front?

[arkracing]

Originally Posted by 1972SuperCheyenne

Looks good. Any pics of the 60 front?

Thanks. I really hate to sell it, I probably won't even get a reasonable offer as nothing seems to be selling well lately. It was originally a Peterbuilt service vehicle from S.C. I bought it because the bed and frame were so clean. Here are some more pictures The D60&14bFF are in the first picture I have the correct spring plates for the 60 as well. (they are the first 2 rear ends on the ground):

[str8axle55]

Please note that you must be a supporting member to post classified items. This includes but is not limited to What Its Worth, Want To Buy, Want To Trade, and For Sale. Please consider supporting the forum by subscribing. Further information on the subscription levels available are located here

If you need any further assistance with that please contact any Admin for help.

[87Bob]

I wished you lived closer it would be gone in a NY minute.

[STOCKISH]

Thats what I was just thinking.

[Sarge261]

PM Sent

[arkracing]

Sold

[arkracing]

Please note that you must be a supporting member to post classified items. This includes but is not limited to What Its Worth, Want To Buy, Want To Trade, and For Sale. Please consider supporting the forum by subscribing. Further information on the subscription levels available are located here

If you need any further assistance with that please contact any Admin for help.

[Sarge261]

Thanks for everything, for anyone looking to buy parts, ARK is a class act, it was great to meet a fellow board member. I'll watch you for more classifieds.

Sarge