FL 250 6 cyl motor and transmission - The 1947 - Present Chevrolet & GMC Truck Message Board Network

**FL71C10** · 07-23-2010, 04:05 PM

Selling parts from a 250 6 cyl and 3 speed transmission from 68 chevy pickup. Presumed to be the original engine from the truck.

6 cyl engine shroud/guard $15 plus shipping
3 speed manual trans shift rods $20 plus shipping
complete exhaust system $35, fair condition, local pickup only, not worth shipping

All prices are plus shipping

Let me know if there is anything else you need that I didn't mention. Parts are also for sale locally.

scrapmetalart · 07-23-2010, 04:51 PM

sent Pm about carb, intake & exhaust manifold. Thanks

dabruce15 · 07-23-2010, 06:04 PM

I may need the carb for parts. if it gets to me, can I see a picture of the portion facing the firewall? Thanks.

**70STOVEBOLT** · 07-23-2010, 10:59 PM

Is that a 4 bbl air cleaner base on there? Is it metal? How much with shipping to 46562?
Thanks, Mark

**FL71C10** · 07-24-2010, 08:37 AM

Quote:

Originally Posted by dabruce15

I may need the carb for parts. if it gets to me, can I see a picture of the portion facing the firewall? Thanks.

I'll get some better pictures this afternoon and post them.

**FL71C10** · 07-24-2010, 08:37 AM

Quote:

Originally Posted by 70STOVEBOLT

Is that a 4 bbl air cleaner base on there? Is it metal? How much with shipping to 46562?
Thanks, Mark

It is metal, How about $15 shipped?

**70STOVEBOLT** · 07-24-2010, 09:06 AM

Do you take paypal?

**FL71C10** · 07-24-2010, 11:18 AM

Quote:

Originally Posted by 70STOVEBOLT

Is that a 4 bbl air cleaner base on there? Is it metal? How much with shipping to 46562?
Thanks, Mark

I'll p.m. you my email address for paypal

**FL71C10** · 07-24-2010, 11:23 AM

Quote:

Originally Posted by scrapmetalart

sent Pm about carb, intake & exhaust manifold. Thanks

I'll take the intake and exhaust off and weigh them to get a better estimate on shipping.

scrapmetalart · 07-24-2010, 10:37 PM

Quote:

Originally Posted by FL71C10

I'll take the intake and exhaust off and weigh them to get a better estimate on shipping.

Thanks. if you were closer I would pick up the whole thing!

**FL71C10** · 08-22-2010, 12:41 AM

Sorry about the delay. I got slammed at work and then went on vacation. Here are some pics of things people wanted to see: The carb, manifolds, and air cleaner base.

**FL71C10** · 08-22-2010, 12:43 AM

More carb pics

**FL71C10** · 08-22-2010, 12:44 AM

air cleaner base

**FL71C10** · 08-22-2010, 01:05 AM

Intake & exhaust manifolds

68lwb292 · 08-22-2010, 01:25 AM

PM sent

**FL71C10** · 08-22-2010, 03:29 PM

Sold: intake manifold, exhaust manifold and carb.

**70STOVEBOLT** · 08-24-2010, 04:05 PM

PM your paypal address and I'll get you paid for the air cleaner base.

**FL71C10** · 08-26-2010, 10:24 PM

Valve cover sold!

Anyone need anything else? I updated the list above.

70stovebolt, I'll get that air cleaner base packed up this weekend.

scrapmetalart · 08-31-2010, 08:48 PM

Got the stuff today. Pleasure dealing with you. THANK YOU!

Arrington01 · 09-01-2010, 05:41 PM

Do you have any of the shifting linkage from column to trans for a standard 3spd trans? The two long shifting rods is what i am looking for. Thanks Jason

**FL71C10** · 09-02-2010, 06:20 AM

Jason,

I'm pretty sure I do. It might take me a few days to get up there, but I'll check.

**70STOVEBOLT** · 09-14-2010, 04:12 PM

Any word on that air cleaner base? Still interested...

**FL71C10** · 09-15-2010, 08:13 AM

70stovebolt and arrington01, I haven't forgotten about you. Just been slammed at work and haven't been able to get up there. Hopefully before the weekend.

**70STOVEBOLT** · 09-15-2010, 10:23 AM

No hurry, just wanted to touch base.

**FL71C10** · 09-21-2010, 08:26 AM

Quote:

Originally Posted by Arrington01

Do you have any of the shifting linkage from column to trans for a standard 3spd trans? The two long shifting rods is what i am looking for. Thanks Jason

I do have these and here are some pics. How about $20 plus shipping? They weigh 1.7 lbs with no box and the box would need to be 30 or 32" long and about 4" wide.

07-23-2010, 04:05 PM	#1
FL71C10 Senior Member Join Date: Jun 2010 Location: Orlando, Florida Posts: 2,514	250 6 cyl motor and transmission Selling parts from a 250 6 cyl and 3 speed transmission from 68 chevy pickup. Presumed to be the original engine from the truck. 6 cyl engine shroud/guard $15 plus shipping 3 speed manual trans shift rods $20 plus shipping complete exhaust system $35, fair condition, local pickup only, not worth shipping All prices are plus shipping Let me know if there is anything else you need that I didn't mention. Parts are also for sale locally. Attached Images __________________ 71 Chevy C10 Shortbed Stepside. LT1 with 4l60E. Just got back from painter, in assembly now. Last edited by FL71C10; 12-28-2010 at 01:52 PM.

07-23-2010, 04:51 PM	#2
scrapmetalart Junior Member Join Date: Mar 2007 Location: DAYTON Posts: 505	Re: 250 6 cyl motor and transmission sent Pm about carb, intake & exhaust manifold. Thanks __________________ frontstreetcycle on Instagram

07-23-2010, 06:04 PM	#3
dabruce15 Registered User Join Date: Mar 2009 Location: Chatsworth, CA Posts: 236	Re: 250 6 cyl motor and transmission I may need the carb for parts. if it gets to me, can I see a picture of the portion facing the firewall? Thanks. __________________ Beauty is in the eye of the beer-holder. Praise the lowered!

07-23-2010, 10:59 PM	#4
70STOVEBOLT Senior Member Join Date: Jun 2005 Location: Winona Lake, IN Posts: 6,538	Re: 250 6 cyl motor and transmission Is that a 4 bbl air cleaner base on there? Is it metal? How much with shipping to 46562? Thanks, Mark __________________ 70 C/10 SWB 402/TH400/3.73 "The Needy Beast" 200,000 Mile Club Disc Brake Club Owner installed options: Front Sway Bar Power Steering Power Brakes Cigar Lighter Courtesy Lights Deluxe Side Markers Wiper Delay Sliding Rear Window Power Windows Power Locks Sniper EFI 2015 Silverado 1500 LS 4.3/6L80/3.23 lowered 2" front & rear

07-24-2010, 09:06 AM	#7
70STOVEBOLT Senior Member Join Date: Jun 2005 Location: Winona Lake, IN Posts: 6,538	Re: 250 6 cyl motor and transmission Do you take paypal? __________________ 70 C/10 SWB 402/TH400/3.73 "The Needy Beast" 200,000 Mile Club Disc Brake Club Owner installed options: Front Sway Bar Power Steering Power Brakes Cigar Lighter Courtesy Lights Deluxe Side Markers Wiper Delay Sliding Rear Window Power Windows Power Locks Sniper EFI 2015 Silverado 1500 LS 4.3/6L80/3.23 lowered 2" front & rear

08-22-2010, 12:41 AM	#11
FL71C10 Senior Member Join Date: Jun 2010 Location: Orlando, Florida Posts: 2,514	Re: 250 6 cyl motor and transmission Sorry about the delay. I got slammed at work and then went on vacation. Here are some pics of things people wanted to see: The carb, manifolds, and air cleaner base. __________________ 71 Chevy C10 Shortbed Stepside. LT1 with 4l60E. Just got back from painter, in assembly now. Last edited by FL71C10; 08-22-2010 at 03:32 PM.

08-22-2010, 12:43 AM	#12
FL71C10 Senior Member Join Date: Jun 2010 Location: Orlando, Florida Posts: 2,514	Re: 250 6 cyl motor and transmission More carb pics __________________ 71 Chevy C10 Shortbed Stepside. LT1 with 4l60E. Just got back from painter, in assembly now. Last edited by FL71C10; 08-22-2010 at 03:32 PM.

08-22-2010, 12:44 AM	#13
FL71C10 Senior Member Join Date: Jun 2010 Location: Orlando, Florida Posts: 2,514	Re: 250 6 cyl motor and transmission air cleaner base __________________ 71 Chevy C10 Shortbed Stepside. LT1 with 4l60E. Just got back from painter, in assembly now. Last edited by FL71C10; 12-01-2010 at 01:30 PM.

08-22-2010, 01:05 AM	#14
FL71C10 Senior Member Join Date: Jun 2010 Location: Orlando, Florida Posts: 2,514	Re: 250 6 cyl motor and transmission Intake & exhaust manifolds __________________ 71 Chevy C10 Shortbed Stepside. LT1 with 4l60E. Just got back from painter, in assembly now. Last edited by FL71C10; 09-02-2010 at 06:21 AM.

08-22-2010, 01:25 AM	#15
68lwb292 Ex-Minitrucker Join Date: Apr 2009 Location: Bushnell, FL Posts: 301	Re: 250 6 cyl motor and transmission PM sent Last edited by 68lwb292; 08-22-2010 at 02:47 AM.

08-22-2010, 03:29 PM	#16
FL71C10 Senior Member Join Date: Jun 2010 Location: Orlando, Florida Posts: 2,514	Re: 250 6 cyl motor and transmission Sold: intake manifold, exhaust manifold and carb. __________________ 71 Chevy C10 Shortbed Stepside. LT1 with 4l60E. Just got back from painter, in assembly now.

08-24-2010, 04:05 PM	#17
70STOVEBOLT Senior Member Join Date: Jun 2005 Location: Winona Lake, IN Posts: 6,538	Re: 250 6 cyl motor and transmission PM your paypal address and I'll get you paid for the air cleaner base. __________________ 70 C/10 SWB 402/TH400/3.73 "The Needy Beast" 200,000 Mile Club Disc Brake Club Owner installed options: Front Sway Bar Power Steering Power Brakes Cigar Lighter Courtesy Lights Deluxe Side Markers Wiper Delay Sliding Rear Window Power Windows Power Locks Sniper EFI 2015 Silverado 1500 LS 4.3/6L80/3.23 lowered 2" front & rear

08-26-2010, 10:24 PM	#18
FL71C10 Senior Member Join Date: Jun 2010 Location: Orlando, Florida Posts: 2,514	Re: 250 6 cyl motor and transmission Valve cover sold! Anyone need anything else? I updated the list above. 70stovebolt, I'll get that air cleaner base packed up this weekend. __________________ 71 Chevy C10 Shortbed Stepside. LT1 with 4l60E. Just got back from painter, in assembly now.

08-31-2010, 08:48 PM	#19
scrapmetalart Junior Member Join Date: Mar 2007 Location: DAYTON Posts: 505	Re: 250 6 cyl motor and transmission Got the stuff today. Pleasure dealing with you. THANK YOU! __________________ frontstreetcycle on Instagram

09-01-2010, 05:41 PM	#20
Arrington01 Registered User Join Date: Feb 2008 Location: Texas Posts: 1,014	Re: 250 6 cyl motor and transmission Do you have any of the shifting linkage from column to trans for a standard 3spd trans? The two long shifting rods is what i am looking for. Thanks Jason



Register or Log In To remove these advertisements.

09-02-2010, 06:20 AM	#21
FL71C10 Senior Member Join Date: Jun 2010 Location: Orlando, Florida Posts: 2,514	Re: 250 6 cyl motor and transmission Jason, I'm pretty sure I do. It might take me a few days to get up there, but I'll check. __________________ 71 Chevy C10 Shortbed Stepside. LT1 with 4l60E. Just got back from painter, in assembly now.

09-14-2010, 04:12 PM	#22
70STOVEBOLT Senior Member Join Date: Jun 2005 Location: Winona Lake, IN Posts: 6,538	Re: 250 6 cyl motor and transmission Any word on that air cleaner base? Still interested... __________________ 70 C/10 SWB 402/TH400/3.73 "The Needy Beast" 200,000 Mile Club Disc Brake Club Owner installed options: Front Sway Bar Power Steering Power Brakes Cigar Lighter Courtesy Lights Deluxe Side Markers Wiper Delay Sliding Rear Window Power Windows Power Locks Sniper EFI 2015 Silverado 1500 LS 4.3/6L80/3.23 lowered 2" front & rear

09-15-2010, 08:13 AM	#23
FL71C10 Senior Member Join Date: Jun 2010 Location: Orlando, Florida Posts: 2,514	Re: 250 6 cyl motor and transmission 70stovebolt and arrington01, I haven't forgotten about you. Just been slammed at work and haven't been able to get up there. Hopefully before the weekend. __________________ 71 Chevy C10 Shortbed Stepside. LT1 with 4l60E. Just got back from painter, in assembly now.

09-15-2010, 10:23 AM	#24
70STOVEBOLT Senior Member Join Date: Jun 2005 Location: Winona Lake, IN Posts: 6,538	Re: 250 6 cyl motor and transmission No hurry, just wanted to touch base. __________________ 70 C/10 SWB 402/TH400/3.73 "The Needy Beast" 200,000 Mile Club Disc Brake Club Owner installed options: Front Sway Bar Power Steering Power Brakes Cigar Lighter Courtesy Lights Deluxe Side Markers Wiper Delay Sliding Rear Window Power Windows Power Locks Sniper EFI 2015 Silverado 1500 LS 4.3/6L80/3.23 lowered 2" front & rear

Register or Log In To remove these advertisements.