|
Register or Log In To remove these advertisements. |
|
|
|
|||||||
 |
|
|
Thread Tools | Display Modes |
07-30-2010, 09:19 PM
|
#1 |
|
Lost amongst the CORN
Join Date: Nov 2002
Location: Northern Iowa
Posts: 1,072
|
Frame differences 1/2 3/4 AD trucks
I know the rear half the frames are different, the 1/2 is shorter and the rails flare out were the 3/4 is straight. But am wondering if the frames are different in the front? Is the rail height and depth the same?
Am planning out an IFS install on my 49 3/4 and wondering if I will come across any challenages due to frame differences as the IFS are all patterned off of 1/2 ton trucks. Right now am leaning towards a Heidt's MII Thanks...Eric
__________________
Currently working on How To Videos and custom metal 70 Chevelle gettin Sliced and Diced Anything But STOCK 70 Chevelle SS455 not a typo its a BUICK BABY 49 and 72 Chevy Trucks restored to original...close to it Drommer Stor....Norwegian for Dream Big http://s969.photobucket.com/albums/a...lle/?start=all https://www.flickr.com/photos/47922830@N03/ Pictures of my work and projects |
|
|
|
07-31-2010, 03:53 PM
|
#2 |
|
Senior Member
 
Join Date: Jul 2010
Location: Dandridge, Tn. USA
Posts: 2,226
|
Re: Frame differences 1/2 3/4 AD trucks
Yes, the 1/2t and 3/4t are pretty much the same from the front cab mount forward. Any IFS kit that fits 1/2t will fit your 3/4t. the frame rail material is a little thicker on the 3/4t, .173" compared to .158" and don't be shocked if you have to fit the boxing plates a bit, as the forming is slightly different. We make a nice IFS for these as well. But onli in coil-over, or air bag, not in a coil spring and shock. www.nolimit.net
|
|
|
|
|
| Bookmarks |
|
|
Linear Mode
