What did you get done 8/1/2010 edition - The 1947 - Present Chevrolet & GMC Truck Message Board Network

**old Rusty C10** · 08-01-2010, 06:48 PM

me and the mrs have been laid up sick all weekend with a summer flu type deal so nothing truck related....
How about you all?

AceX · 08-01-2010, 07:18 PM

Just finished up attending Ride Fest at the local UTI campus here in Sacramento. An OK show but could be a little better organized as far as judging and some other small things but otherwise it was good.

Had all the guys from 355nation.com join me at my house for BBQ and they just left.

The '85 is finally running that way I want, so I'm not touching it for a while...

S10Fan · 08-01-2010, 07:28 PM

Went to a car show Saturday and a cruise-in Saturday night. Both events were about an hour and a half from home, it's always good to take a long drive in the Heap. I didn't bring home any hardware this time.

I've spent today (Sunday) hanging new kitchen cabinets, 2 ceiling fans, and other chores related to "Our House, the Re-Do". Quick, someone pass me the lighter fluid and a book of matches.

camshaftgsxr · 08-01-2010, 07:35 PM

Decided to do some stuff tomorrow

lazy Sundays

Gemp · 08-01-2010, 07:48 PM

No work new on my truck, I did take jr to his 1st swap meet this morning. I had planned to weld up my header collectors this afternoon. But my BBQ pit ended up on my welding table instead. The way figure it a man needs tasty Q to build custom trucks.

72BlckButy · 08-01-2010, 07:49 PM

Hit a cruise Saturday night, BBQ'd this afternoon.

Studying filled in the rest of the weekend...

Chionos GMs · 08-01-2010, 07:54 PM

Fixed the hose on the radiator in my dd and cranked the torsion bars

. Did a roadside brake job on my moms burban. Has anyone ever seen the material on the brake pad just crumble?? Also gave an estimate for a seat to be reupholster and replace a oil sender.

81ratrodc10 · 08-01-2010, 08:04 PM

sat morn went to look at some cars for my little sister found a decent one for her sat night when to the willie nelson concert my sisters mom and grand mother work for hime so wee had all access got to park my truck right behind the busses and in front of the entrance so every one coming in got to see it they had two guys from the venue standing behind it at the fence all night so no one could come in heres some pics

tswore · 08-01-2010, 08:04 PM

saturday morning went to work to change the fuel pump in the wifes denali. Not too bad a project considering i just did it 3 MONTHS AGO

While I was there I got suckered into working until 2:30, on my day off. After that it was rollerskating and dinner. Today I spent all day outside. cleaned/swept the driveway (45'x45'), which I havent done to this extent for 3 years, moved a big pile of rocks, cleaned the garage, mostly anyway, it was getting pretty bad! Upgraded my daughter to a 16 inch bike from her 12 inch, the grow too fast! And now Im waiting for the steaks on the grill! Damn fine day.

81ratrodc10 · 08-01-2010, 08:07 PM

more

81ratrodc10 · 08-01-2010, 08:09 PM

the bus with the pics on it is willies

Matt Man · 08-01-2010, 08:13 PM

had to replace both my lower ball joints and the right side upper shaft kit, what fun it was getting those control arms off! Have to get my balljoints pressed in tommorow.

knightowl73 · 08-01-2010, 08:21 PM

i primed my bed today to match the rest of my truck, swapped back to a good running quadrajet, and attempted to lower my new truck seat that sits too high, but for today, that was a no-go. wasted 45 minutes taking it all apart to find it wasnt as easy as taking a bracket out and lowering the seat down a bit. good day for me though, hardly ever get to work on my own stuff anymore.

**PRattenbury** · 08-01-2010, 08:32 PM

Started installing a Pypes exhaust system. 105 degrees outside, so I'm taking it slow. Perfect day for welding, though.

flamingbig10 · 08-01-2010, 08:40 PM

went to a big car show in Sachse Texas there was 300 entries, took home a first place there was nearly 20 in my class

spankbomb · 08-01-2010, 09:05 PM

It is 99 here right now and we had a high of 103. Too hot to be outside.

*78 Chevyrado* · 08-01-2010, 09:34 PM

Took a Trip to Auburn AL to bring a buddy some furniture and help him move... Truck did great, no problems though the engines tiredness shows with the trailer AND a/c... Its reliable though. It's about 530 Miles all together plus driving around Auburn. I got 15MPG @70MPG average says my lil calculator.

When I got there:

On The Way Home:

Still in AL

Kia Plant off I85 In South GA

I-85N into Atlanta

Back of the Atlanta Airport

Fun Shot around Buckhead

Spagetti Junction on I85N

**N2TRUX** · 08-01-2010, 10:14 PM

Saturday was spent running errands and service calls. I got the wife's Denali inspected, oil changed, washed and detailed. Spent the rest of the day running service calls.

Sunday I got up early expecting my yard crew to arrive, but the were a no show. I pulled weeds till noon, then called it off due to the heat. After a cool off in the pool, I finally got to work on my 77.

I spent the afternoon fabbing up a set of brackets for the actuator rods on the ride height sensors. For the latest update on my Ride Tech e3 install go here- LINK

mullit · 08-01-2010, 10:26 PM

Went to Envy Frenzy,Kingston NY. one of the better shows in the northeast

CLASSIC87' · 08-01-2010, 10:58 PM

Pretty busy weekend here... sold the 82 Blazer on Thursday nite and bought the below truck Friday AM and picked it up Friday evening after work. Here's a few pics... will take a few more after I do a couple of things to it. As far as specs... 09', 6K miles, 2" lift and running 20's... I'm LOVING it!

D13 · 08-02-2010, 06:24 AM

Worked Saturday, cleaned up the 700R4's valve body, got it ready to put back in on Sunday, pulled more wood from the chicken coop/raccoon house to sort, started burning the bad stuff, applied sealer to the lower board on 60' of barn wall. As soon as I get the VB back in the diesel we're gonna get barn doors...

silvereagle07 · 08-02-2010, 10:19 AM

I scored some upper/lower control arms, ball joints and a driveshaft Friday. I had a huge cookout and party for my daughters 3rd birthday on Saturday. We all had a great time with the family and friends. We had about 65 people there. We rested on Sunday. Man was I tired!!!

PugDad · 08-02-2010, 10:27 AM

Took out the driver side air vent directional thingy, and fixed the louvers. They were just flopping around inside the housing. Now, it actually directs air!

foamypirate · 08-02-2010, 04:56 PM

Wet sanded and polished one fender to bring back the shine. Slowly working on doing the whole truck.

Also did some reading, reading, reading, and more reading on swapping in an LY6 6.0L. Also did some reading on a 6L80/90 swap.

WigglesTheHoly · 08-03-2010, 08:47 PM

Fired up the 79 for the first time now just to change out the interior and the passenger fender and I'll be ready to start driving it and getting the kinks worked out before I put it up for sale.

08-01-2010, 06:48 PM	#1
old Rusty C10 Robert Olson Transport Join Date: Oct 2002 Location: recent transplant to NC USA Posts: 20,313	What did you get done 8/1/2010 edition me and the mrs have been laid up sick all weekend with a summer flu type deal so nothing truck related.... How about you all? __________________ Bob 1951 International running on a squarebody chassis "If a man's worth is judged by the people he associates himself with, then i am the richest man in the world knowing some of the fine people of this board" http://67-72chevytrucks.com/vboard/a...t.php?f=25&a=9 (you can review the site rules here!) PM Me for your vehicle/parts hauling needs in the North East US or see my Facebook page Robert Olson Transport Live each day to the fullest.. you never know when fate is going to pull the rug out from under you... I hate cancer!!

08-01-2010, 07:18 PM	#2
AceX >130dB Moderator Join Date: Aug 2006 Location: Sacramento, CA Posts: 2,130	Re: What did you get done 8/1/2010 edition Just finished up attending Ride Fest at the local UTI campus here in Sacramento. An OK show but could be a little better organized as far as judging and some other small things but otherwise it was good. Had all the guys from 355nation.com join me at my house for BBQ and they just left. The '85 is finally running that way I want, so I'm not touching it for a while... __________________ Living Life @ 130dB LED Tail Light Conversion; How-to Friend. Father. Brother. RIP El Jay ------------------------------------------------------------------------------------------------------------------------- CLICK HERE and for less than $0.07 a day, you too can help support and build a better forum.

08-01-2010, 07:28 PM	#3
S10Fan Old Heap Driver Join Date: Mar 2008 Location: Newport News, Va Posts: 2,642	Re: What did you get done 8/1/2010 edition Went to a car show Saturday and a cruise-in Saturday night. Both events were about an hour and a half from home, it's always good to take a long drive in the Heap. I didn't bring home any hardware this time. I've spent today (Sunday) hanging new kitchen cabinets, 2 ceiling fans, and other chores related to "Our House, the Re-Do". Quick, someone pass me the lighter fluid and a book of matches. __________________ _____________________________ Bryan '99 Silverado 1500, 4.3, 5-speed, reg cab, short bed '50 Chevy 2DR Hard Top, 350/350, M2 Front End, 3:08 gear, cruiser. '40 F**d Sedan, all Chevy power, Heidt's front end, TCI rear, nice driver.

08-01-2010, 07:35 PM	#4
camshaftgsxr Registered User Join Date: Feb 2010 Location: Asheville, N.C. Posts: 785	Re: What did you get done 8/1/2010 edition Decided to do some stuff tomorrow lazy Sundays __________________

08-01-2010, 07:48 PM	#5
Gemp Registered User Join Date: Jan 2009 Location: Cleveland,Ohio Posts: 262	Re: What did you get done 8/1/2010 edition No work new on my truck, I did take jr to his 1st swap meet this morning. I had planned to weld up my header collectors this afternoon. But my BBQ pit ended up on my welding table instead. The way figure it a man needs tasty Q to build custom trucks. __________________ 06' GMC 1500 Crew cab.....

08-01-2010, 07:49 PM	#6
72BlckButy Tot Roddin' Join Date: Apr 2005 Location: Mid-MO Posts: 24,461	Re: What did you get done 8/1/2010 edition Hit a cruise Saturday night, BBQ'd this afternoon. Studying filled in the rest of the weekend... __________________ -Nate 1969 CST SWB - Project Blank Slate (4.5/6" ECE Static Drop, 6-lug disc brake upgrade (manual), Billet Specialties Vintec 20x8.5 255/40 (F) 20x10 295/40 (R), 250 I-6) 1960 AMF Skylark - Tot Roddin' (Lowered with custom frame; soon to include custom push bar and interior) 2008 Silverado CrewCab 1LT (5.3L, 3:73, 4x4, LT1, Z-71, Towing Package)

08-01-2010, 07:54 PM	#7
Chionos GMs Registered User Join Date: Jun 2010 Location: Farmington,CA Posts: 345	Re: What did you get done 8/1/2010 edition Fixed the hose on the radiator in my dd and cranked the torsion bars . Did a roadside brake job on my moms burban. Has anyone ever seen the material on the brake pad just crumble?? Also gave an estimate for a seat to be reupholster and replace a oil sender. __________________ My last name is Chiono pronounced key-ono even if my grammar teacher told me Ch dont make a K sound 1995 Ext. cab 350 4wd dd 260,*** miles 1986 1/2 ton swb 305 2wd (melted bearings) SOLD!! 1982 3/4 lwb 6.2 diesel 2wd 1962 Chevy 283 4 speed long step 2wd 2 OWNER GONE!!

08-01-2010, 08:04 PM	#8
81ratrodc10 house of chevy's Join Date: May 2010 Location: New milford, CT Posts: 583	Re: What did you get done 8/1/2010 edition sat morn went to look at some cars for my little sister found a decent one for her sat night when to the willie nelson concert my sisters mom and grand mother work for hime so wee had all access got to park my truck right behind the busses and in front of the entrance so every one coming in got to see it they had two guys from the venue standing behind it at the fence all night so no one could come in heres some pics Attached Images __________________ 1987 m1028 cucv d30 2001 chevy s10 2000 honda shadow sabre 1100 "it's going to be an interesting ride home"

08-01-2010, 08:04 PM	#9
tswore built not bought Join Date: Sep 2003 Location: pocatello, idaho Posts: 160	Re: What did you get done 8/1/2010 edition saturday morning went to work to change the fuel pump in the wifes denali. Not too bad a project considering i just did it 3 MONTHS AGO While I was there I got suckered into working until 2:30, on my day off. After that it was rollerskating and dinner. Today I spent all day outside. cleaned/swept the driveway (45'x45'), which I havent done to this extent for 3 years, moved a big pile of rocks, cleaned the garage, mostly anyway, it was getting pretty bad! Upgraded my daughter to a 16 inch bike from her 12 inch, the grow too fast! And now Im waiting for the steaks on the grill! Damn fine day. __________________ MY BUILD THREAD "project: what you doin that for?" http://67-72chevytrucks.com/vboard/s...d.php?t=382503

08-01-2010, 08:07 PM	#10
81ratrodc10 house of chevy's Join Date: May 2010 Location: New milford, CT Posts: 583	Re: What did you get done 8/1/2010 edition more Attached Images __________________ 1987 m1028 cucv d30 2001 chevy s10 2000 honda shadow sabre 1100 "it's going to be an interesting ride home"

08-01-2010, 08:09 PM	#11
81ratrodc10 house of chevy's Join Date: May 2010 Location: New milford, CT Posts: 583	Re: What did you get done 8/1/2010 edition the bus with the pics on it is willies __________________ 1987 m1028 cucv d30 2001 chevy s10 2000 honda shadow sabre 1100 "it's going to be an interesting ride home"

08-01-2010, 08:13 PM	#12
Matt Man Registered User Join Date: Oct 2009 Location: Buhl, Idaho Posts: 1,438	Re: What did you get done 8/1/2010 edition had to replace both my lower ball joints and the right side upper shaft kit, what fun it was getting those control arms off! Have to get my balljoints pressed in tommorow. __________________ 86 c30 crew cab dually 454/400 4/6 drop SOLD 1-8-11 1981 chevy K10 short Bed Scottsdale SOLD 10-26-2020 67 GMC Stepside Straight six/3 on the tree "The Peach" 2020 Silverado Double Cab LT Z71 5.3 8 speed Daily Driver K10 build http://67-72chevytrucks.com/vboard/s...d.php?t=671934 The Peach build http://67-72chevytrucks.com/vboard/s...d.php?t=733903

08-01-2010, 08:21 PM	#13
knightowl73 TUKE-NoBullChit Customs owner Join Date: Feb 2010 Location: La Marque, Tx Posts: 640	Re: What did you get done 8/1/2010 edition i primed my bed today to match the rest of my truck, swapped back to a good running quadrajet, and attempted to lower my new truck seat that sits too high, but for today, that was a no-go. wasted 45 minutes taking it all apart to find it wasnt as easy as taking a bracket out and lowering the seat down a bit. good day for me though, hardly ever get to work on my own stuff anymore. __________________ OWNER @ NBC Customs...No Bull Chit....'92 GMC C2500 ECSB 350/TH400, '57 FORD SKYLINER (My dad's for now, but its really mine-you'll NEVER see a cooler car at 7 years old lol), '42 ford rat rod shop truck (new project), 91 CHRYSLER VOYER MINIVAN (shop van for now) http://www.facebook.com/#!/nbc.customs

08-01-2010, 08:32 PM	#14
PRattenbury Senior Member Join Date: Feb 2010 Location: Maumelle, AR Posts: 478	Re: What did you get done 8/1/2010 edition Started installing a Pypes exhaust system. 105 degrees outside, so I'm taking it slow. Perfect day for welding, though.

08-01-2010, 08:40 PM	#15
flamingbig10 6.0 powered square Join Date: Feb 2008 Location: Mesquite texas Posts: 3,459	Re: What did you get done 8/1/2010 edition went to a big car show in Sachse Texas there was 300 entries, took home a first place there was nearly 20 in my class __________________ Aaron 1980 c-10 short bed lowered, cammed 6.0, 4l80e 3600 stall, smp tune, wilwoods, and flames best time so far best et 7.86 @87 on motor 7.57 90 on a 75 shot Build http://67-72chevytrucks.com/vboard/s...d.php?t=283326



Register or Log In To remove these advertisements.

08-01-2010, 09:05 PM	#16
spankbomb Registered User Join Date: May 2009 Location: Elgin, TX Posts: 140	Re: What did you get done 8/1/2010 edition It is 99 here right now and we had a high of 103. Too hot to be outside. __________________ www.eastofaustin.com

08-01-2010, 09:34 PM	#17
78 Chevyrado Account Suspended Join Date: Dec 2007 Location: Unnapreciative, Trollville Posts: 2,079	Re: What did you get done 8/1/2010 edition Took a Trip to Auburn AL to bring a buddy some furniture and help him move... Truck did great, no problems though the engines tiredness shows with the trailer AND a/c... Its reliable though. It's about 530 Miles all together plus driving around Auburn. I got 15MPG @70MPG average says my lil calculator. When I got there: On The Way Home: Still in AL Kia Plant off I85 In South GA I-85N into Atlanta Back of the Atlanta Airport Fun Shot around Buckhead Spagetti Junction on I85N Last edited by 78 Chevyrado; 08-01-2010 at 09:42 PM.

08-01-2010, 10:14 PM	#18
N2TRUX Happy to be here Join Date: Mar 2000 Location: Cypress, TX Posts: 39,021	Re: What did you get done 8/1/2010 edition Saturday was spent running errands and service calls. I got the wife's Denali inspected, oil changed, washed and detailed. Spent the rest of the day running service calls. Sunday I got up early expecting my yard crew to arrive, but the were a no show. I pulled weeds till noon, then called it off due to the heat. After a cool off in the pool, I finally got to work on my 77. I spent the afternoon fabbing up a set of brackets for the actuator rods on the ride height sensors. For the latest update on my Ride Tech e3 install go here- LINK __________________ Follow me on Facebook and Instagram @N2trux.com Articles- "Jake" the 84 to 74 crewcab "Elwood" the77_Remix 85 GMC Sierra "Scarlett" "Refining Sierra"

08-01-2010, 10:26 PM	#19
mullit Registered User Join Date: Jan 2007 Location: connecticut Posts: 127	Re: What did you get done 8/1/2010 edition Went to Envy Frenzy,Kingston NY. one of the better shows in the northeast

08-01-2010, 10:58 PM	#20
CLASSIC87' OL BLUU Join Date: Mar 2004 Location: WICHITA, KS. Posts: 1,065	Re: What did you get done 8/1/2010 edition Pretty busy weekend here... sold the 82 Blazer on Thursday nite and bought the below truck Friday AM and picked it up Friday evening after work. Here's a few pics... will take a few more after I do a couple of things to it. As far as specs... 09', 6K miles, 2" lift and running 20's... I'm LOVING it! Attached Images __________________ More Drop and pics... whatch'a think?: http://67-72chevytrucks.com/vboard/s...d.php?t=249927 My recent 2wd Blazer progress thread: http://67-72chevytrucks.com/vboard/s...d.php?t=393427 http://67-72chevytrucks.com/vboard/s...d.php?t=394870 Last edited by CLASSIC87'; 08-01-2010 at 11:00 PM.

08-02-2010, 06:24 AM	#21
D13 Registered User Join Date: Feb 2007 Location: Memphis MI Posts: 1,851	Re: What did you get done 8/1/2010 edition Worked Saturday, cleaned up the 700R4's valve body, got it ready to put back in on Sunday, pulled more wood from the chicken coop/raccoon house to sort, started burning the bad stuff, applied sealer to the lower board on 60' of barn wall. As soon as I get the VB back in the diesel we're gonna get barn doors... __________________ 1987 2 ton 1982 250/TH350 beater in progress Dad's 1981 3/4 L6 3 on tree posi and no options, awaiting restoration or scrapping Plus a mess o' tractors

08-02-2010, 10:19 AM	#22
silvereagle07 Registered User Join Date: Sep 2008 Location: Bailey, NC Posts: 2,462	Re: What did you get done 8/1/2010 edition I scored some upper/lower control arms, ball joints and a driveshaft Friday. I had a huge cookout and party for my daughters 3rd birthday on Saturday. We all had a great time with the family and friends. We had about 65 people there. We rested on Sunday. Man was I tired!!! __________________ Jeramy '84 GMC project truck '85 Chevy 4X4 SOLD '07 Chevy Trailblazer SS 5th Annual SHPHC Car/Truck Show Pics http://67-72chevytrucks.com/vboard/s...d.php?t=543605 UPDATED PICS! CHECK 'EM OUT

08-02-2010, 10:27 AM	#23
PugDad Registered User Join Date: Jul 2010 Location: Tacoma, WA Posts: 69	Re: What did you get done 8/1/2010 edition Took out the driver side air vent directional thingy, and fixed the louvers. They were just flopping around inside the housing. Now, it actually directs air!

08-02-2010, 04:56 PM	#24
foamypirate Registered User Join Date: Apr 2009 Location: Pflugerville, TX Posts: 594	Re: What did you get done 8/1/2010 edition Wet sanded and polished one fender to bring back the shine. Slowly working on doing the whole truck. Also did some reading, reading, reading, and more reading on swapping in an LY6 6.0L. Also did some reading on a 6L80/90 swap.

08-03-2010, 08:47 PM	#25
WigglesTheHoly IT Guy/ Father/ Chevy lover Join Date: Feb 2010 Location: Hoisington, KS Posts: 568	Re: What did you get done 8/1/2010 edition Fired up the 79 for the first time now just to change out the interior and the passenger fender and I'll be ready to start driving it and getting the kinks worked out before I put it up for sale. __________________ 78 Chevy (Pictures) SOLD 79 Chevy LWB (pasture) 83 Chevy LWB (crushed rusted beyond repair) 02 TrailBlazer SOLD 03 VW Passat wagonSOLD 95 extended cab silveradoSOLD (still in family) 05 Crew Cab Silverado 5.3 (The Turd) WTB: 66 El camino Technology Specialist aspiring to be a gear head.

Register or Log In To remove these advertisements.