CA Parting 71 CST Cheyenne 1/2 ton lwb - The 1947 - Present Chevrolet & GMC Truck Message Board Network

KrazyRay · 08-04-2010, 02:06 AM

I brought in this truck for a parts runner but found out that $600 is owed in back DMV fees. The grille is junk, the front bumper is being used for a build, the core support is rusted out, the cab is rusty, and the fenders have rust on the underside. Sadly, the engine pulleys are long water pump. The spid says "custom sport truck" the fender badge is Cheyenne 10.
strong running 350 engine with fresh valve job $400 local SOLD
sm465 $125 local SOLD
5 lug coil spring rear drum to drum $250 local SOLD
5 lug front suspension complete with cross member $150 local
sway bar with brackets $40 plus shipping
gas pedal assembly with cable and carb bracket $37 shipped SOLD
clutch/brake pedal assembly $25 plus shipping
nice hood $80 local SOLD
point distributor with coil (working) $22 shipped
gauge bezel $30 shipped
doors with speaker holes $40 each local
non original split bench seat in good cond. $75 local
68 steering column 4 speed $40 plus shipping SOLD
68 steering wheel some cracks $25 plus shipping SOLD
Please respond in thread to avoid confusion. Parts are for sale local also. Post office money order or paypal is good. Thanks, Ray

KrazyRay · 08-04-2010, 02:12 AM

pics

ralphie628 · 08-04-2010, 02:42 AM

i'll take the gas pedal assembly , any power steering brackets and pump?

gcburdic · 08-04-2010, 09:54 AM

how's the trim cab forward to front clip?

KrazyRay · 08-04-2010, 09:56 AM

ralphie I will get gas pedal pulled this week and put with your other stuff. Sorry, I have no power steering and this truck is set up with the long brackets.
Thanks, Ray

Lee H · 08-04-2010, 10:00 AM

Ray, I'm interested in the 5 lug coil spring rear drum to drum if posi. Please let me know. Lee

KrazyRay · 08-04-2010, 10:08 AM

Sorry, not posi

Lee H · 08-04-2010, 10:12 AM

OK, Thanks

novafrog · 08-04-2010, 10:50 AM

need tail light harness,if not cut up,thanks

sleepertruck72 · 08-04-2010, 01:54 PM

Are the front sidemarkers for sale, if so how much shipped to 95380 ? Thanks

**70cst** · 08-04-2010, 02:49 PM

Are the Door Lock Knobs Darke Olive? I am looking for a set. Thanks

KrazyRay · 08-04-2010, 04:04 PM

Quote:

Originally Posted by gcburdic

how's the trim cab forward to front clip?

The fender spears look pretty good not show truck. The lower trim is gauged and extra screws were added.

KrazyRay · 08-04-2010, 04:06 PM

Quote:

Originally Posted by sleepertruck72

Are the front sidemarkers for sale, if so how much shipped to 95380 ? Thanks

Sorry, the side markers are gone.

KrazyRay · 08-04-2010, 04:06 PM

Quote:

Originally Posted by novafrog

need tail light harness,if not cut up,thanks

The harness is cut up badly.

Southern C10 · 08-04-2010, 04:09 PM

How much for the long water pump pulleys shipped to 37043?

KrazyRay · 08-05-2010, 02:22 AM

Quote:

Originally Posted by 70cst

Are the Door Lock Knobs Darke Olive? I am looking for a set. Thanks

Sorry, They are black

KrazyRay · 08-05-2010, 02:31 AM

Quote:

Originally Posted by Southern C10

How much for the long water pump pulleys shipped to 37043?

For the power steering pump with brackets and pulley, crank pulley, water pump pulley (no water pump), alternator with brackets and pulley $62 shipped. Without alternator and alt. pulley (I will still include alt. brackets) $52 shipped.
Thanks, Ray

Southern C10 · 08-05-2010, 12:28 PM

Quote:

Originally Posted by KrazyRay

For the power steering pump with brackets and pulley, crank pulley, water pump pulley (no water pump), alternator with brackets and pulley $62 shipped. Without alternator and alt. pulley (I will still include alt. brackets) $52 shipped.
Thanks, Ray

I just need the crank pulley and the water pump pulley. How much for those shipped?

KrazyRay · 08-05-2010, 02:55 PM

Quote:

Originally Posted by Southern C10

I just need the crank pulley and the water pump pulley. How much for those shipped?

$27 shipped.
Thanks, Ray

Southern C10 · 08-05-2010, 08:50 PM

Quote:

Originally Posted by KrazyRay

$27 shipped.
Thanks, Ray

Just to double check can you shoot a pic of them on the engine?

Thanks, Brian

KrazyRay · 08-05-2010, 11:14 PM

pics

yob2kanobe · 08-06-2010, 12:05 AM

I will take the point distributor with coil (working) $22 shipped.

KrazyRay · 08-06-2010, 12:08 AM

Quote:

Originally Posted by yob2kanobe

I will take the point distributor with coil (working) $22 shipped.

pm sent

redmonster · 08-07-2010, 01:58 AM

how much for the steering wheel shipped to 79936

67chevy1series · 08-07-2010, 02:21 AM

what do yopu wanty for the rims do they have the nubs for dog dish caps dont need the tires just the rims

08-04-2010, 02:06 AM	#1
KrazyRay Registered User Join Date: Jun 2009 Location: Oroville, CA Posts: 4,827	Parting 71 CST Cheyenne 1/2 ton lwb I brought in this truck for a parts runner but found out that $600 is owed in back DMV fees. The grille is junk, the front bumper is being used for a build, the core support is rusted out, the cab is rusty, and the fenders have rust on the underside. Sadly, the engine pulleys are long water pump. The spid says "custom sport truck" the fender badge is Cheyenne 10. strong running 350 engine with fresh valve job $400 local SOLD sm465 $125 local SOLD 5 lug coil spring rear drum to drum $250 local SOLD 5 lug front suspension complete with cross member $150 local sway bar with brackets $40 plus shipping gas pedal assembly with cable and carb bracket $37 shipped SOLD clutch/brake pedal assembly $25 plus shipping nice hood $80 local SOLD point distributor with coil (working) $22 shipped gauge bezel $30 shipped doors with speaker holes $40 each local non original split bench seat in good cond. $75 local 68 steering column 4 speed $40 plus shipping SOLD 68 steering wheel some cracks $25 plus shipping SOLD Please respond in thread to avoid confusion. Parts are for sale local also. Post office money order or paypal is good. Thanks, Ray Attached Images Last edited by KrazyRay; 11-16-2010 at 01:16 AM.

08-04-2010, 02:12 AM	#2
KrazyRay Registered User Join Date: Jun 2009 Location: Oroville, CA Posts: 4,827	Re: Parting 71 CST Cheyenne 1/2 ton lwb pics Attached Images

08-04-2010, 02:42 AM	#3
ralphie628 Registered User Join Date: Dec 2009 Location: Chatsworth CA Posts: 243	Re: Parting 71 CST Cheyenne 1/2 ton lwb i'll take the gas pedal assembly , any power steering brackets and pump?

08-04-2010, 09:54 AM	#4
gcburdic Restoration Virgin! Join Date: Jan 2008 Location: Huntersville, NC Posts: 8,298	Re: Parting 71 CST Cheyenne 1/2 ton lwb how's the trim cab forward to front clip? __________________ Geoff with a G 1968 Chevy C10 SWB The Mistress 1972 Custom Deluxe C20 Suburban A Suburban Named Isabella 1966 Ford Mustang Mama's High School Graduation Present

08-04-2010, 09:56 AM	#5
KrazyRay Registered User Join Date: Jun 2009 Location: Oroville, CA Posts: 4,827	Re: Parting 71 CST Cheyenne 1/2 ton lwb ralphie I will get gas pedal pulled this week and put with your other stuff. Sorry, I have no power steering and this truck is set up with the long brackets. Thanks, Ray

08-04-2010, 10:00 AM	#6
Lee H Registered User Join Date: Jun 2010 Location: Upland Ca Posts: 4,142	Re: Parting 71 CST Cheyenne 1/2 ton lwb Ray, I'm interested in the 5 lug coil spring rear drum to drum if posi. Please let me know. Lee __________________ 1972 C10 SWB, Air, PS, PB, 350/350THM. Second owner. 1965 Corvette roadster, 44K miles, 327/365 SHP, 4 speed, side exhaust, knockoffs, teak, second owner (bought in 1970), Have ALL numbers matching components. My frame off restoration thread: http://67-72chevytrucks.com/vboard/s...d.php?t=556703

08-04-2010, 10:08 AM	#7
KrazyRay Registered User Join Date: Jun 2009 Location: Oroville, CA Posts: 4,827	Re: Parting 71 CST Cheyenne 1/2 ton lwb Sorry, not posi

08-04-2010, 10:12 AM	#8
Lee H Registered User Join Date: Jun 2010 Location: Upland Ca Posts: 4,142	Re: Parting 71 CST Cheyenne 1/2 ton lwb OK, Thanks __________________ 1972 C10 SWB, Air, PS, PB, 350/350THM. Second owner. 1965 Corvette roadster, 44K miles, 327/365 SHP, 4 speed, side exhaust, knockoffs, teak, second owner (bought in 1970), Have ALL numbers matching components. My frame off restoration thread: http://67-72chevytrucks.com/vboard/s...d.php?t=556703

08-04-2010, 10:50 AM	#9
novafrog Registered User Join Date: Apr 2009 Location: dunlow wv Posts: 435	Re: Parting 71 CST Cheyenne 1/2 ton lwb need tail light harness,if not cut up,thanks

08-04-2010, 01:54 PM	#10
sleepertruck72 Registered User Join Date: Nov 2007 Location: Turlock California 95380 Posts: 2,075	Re: Parting 71 CST Cheyenne 1/2 ton lwb Are the front sidemarkers for sale, if so how much shipped to 95380 ? Thanks __________________ 72 C20 Longbed 05 1500 Z71

08-04-2010, 02:49 PM	#11
70cst Senior Member Join Date: Feb 2001 Location: New Madison, Ohio Posts: 21,365	Re: Parting 71 CST Cheyenne 1/2 ton lwb Are the Door Lock Knobs Darke Olive? I am looking for a set. Thanks __________________ A husband can be right...or...A husband can be happy. 67-72 Chevy and GMC Trucks...The Classic Truck for the Classic Folk. 1970 CST Two tone green, 402BB, 400 Automatic, Tach, Buckets, AC, AM-FM, Tilt, GM CB, GM 8 Tract, LWB, etc JOHN 17:3...The better side of "LIFE" Remember: Everyday is a good day...Some are just gooder!

08-04-2010, 04:09 PM	#15
Southern C10 Is it done yet? Join Date: Apr 2008 Location: Whispering Pines, NC Posts: 826	Re: Parting 71 CST Cheyenne 1/2 ton lwb How much for the long water pump pulleys shipped to 37043? __________________ 1972 Chevy SWB New 383 Stroker/350 Turbo Some day i'll paint it John 3:16 MY BUILD THREAD http://67-72chevytrucks.com/vboard/s...d.php?t=398108

08-05-2010, 11:14 PM	#21
KrazyRay Registered User Join Date: Jun 2009 Location: Oroville, CA Posts: 4,827	Re: Parting 71 CST Cheyenne 1/2 ton lwb pics Attached Images

08-06-2010, 12:05 AM	#22
yob2kanobe Registered User Join Date: Jul 2010 Location: SE Washington state Posts: 80	Re: Parting 71 CST Cheyenne 1/2 ton lwb I will take the point distributor with coil (working) $22 shipped.

08-07-2010, 01:58 AM	#24
redmonster Registered User Join Date: Dec 2008 Location: EL PASO,TEJAS Posts: 212	Re: Parting 71 CST Cheyenne 1/2 ton lwb how much for the steering wheel shipped to 79936



Register or Log In To remove these advertisements.

08-07-2010, 02:21 AM	#25
67chevy1series Registered User Join Date: Mar 2010 Location: a t w a t e r cali 95301 Posts: 10,713	Re: Parting 71 CST Cheyenne 1/2 ton lwb what do yopu wanty for the rims do they have the nubs for dog dish caps dont need the tires just the rims

Register or Log In To remove these advertisements.