WI Wanted Tach Dash Parts and Complete

[Field and Son]

I am looking for any parts for tach dashes: tins, circuits for back, tachs themselves, wiring harnesses, anything to do with the tach dashes. Only original GM parts, no Repros please. Will step up and pay the money for any NOS bezels or tachs.

Also will buy complete working or rebuildable tach dash units for 8cyl as well as the elusive 6cyl trucks. I need to be into complete units that are in good condition for the $200 range, more of course if 6 cyl. I have bought 5 tach dashes in the last month both on here and on ebay in this price range, so it seems to be the right number if you want to move them fast. Please no dammaged or Junk unless at parts prices. PM me with what you have....Thanks

[Field and Son]

Thanks for the PM's so far, I am still looking for more...Jay

[JimmyFloyd]

I have one, listed in my for sale thread. I'm working on pictures. I'm asking a little more than you want, but figured I would post up.

[Field and Son]

Jimmy,

I appreciate the offer and did see yours. I just won another on ebay last night with a best offer of $175, For some reason it seems like the price has fallen a bit on these all of the sudden, so I am not sure where these are in todays world, but as long as I am getting them, I need to remain conservative and cautious, that is until something NOS comes along.

[JimmyFloyd]

Yeah, I will probably have to adjust my price on it. If you want to PM me an offer and a zip code, I will consider it.

[Field and Son]

Jimmy,

Post some pics and I will make you an offer..Jay

[Field and Son]

Thanks guys for all of the replies and the parts so far. Yes, I am still looking for any and all parts as well as complete setups...As long is it is original GM I am interested.


Jimmy,

Your dash looks good. See what happens here for a bit as your price is good for the end user, you can always send me a pm or message if you want me to make an offer....Jay

[Field and Son]

Thanks again for the offers and or parts....Still buying

[msgross]

If you are purchasing be sure to discuss the deals in the thread vs PM. THis way it's out in the open what the condition and price are if someone has a complaint in the end. If not then there is only your word against theirs in the end.

[Field and Son]

Originally Posted by msgross

If you are purchasing be sure to discuss the deals in the thread vs PM. THis way it's out in the open what the condition and price are if someone has a complaint in the end. If not then there is only your word against theirs in the end.

Mike,

That sounds to be correct for both the buyer and seller. PM Sent

[sharpie1972]

Hi Jay, let me know if you need any nice standard gauges to complete your cluster restorations. I've got over 20 clusters to pull gauges from. Sharpie

[Field and Son]

Originally Posted by sharpie1972

Hi Jay, let me know if you need any nice standard gauges to complete your cluster restorations. I've got over 20 clusters to pull gauges from. Sharpie

Super clean ones would be of interest. Any clusters with tins that are like new, or guages with like new paint on the needles. Just pretty much anyhting that is better than most for one reason or another...Jay

[t korinek]

I have an NOS tach lens $75

[Field and Son]

Originally Posted by t korinek

I have an NOS tach lens $75

Thanks Tom,

Put that in my pile - I'll take it,,Jay

[VA72C10]

I have a nice used tach lens, a used tach that was tested to work but the face is a little rusty, and a complete setup that I was told the tach was inoperable but has the lens, inner, and outer tins, and tach, etc. white faces on the gauges. Any interest?

[Field and Son]

Originally Posted by VA72C10

I have a nice used tach lens, a used tach that was tested to work but the face is a little rusty, and a complete setup that I was told the tach was inoperable but has the lens, inner, and outer tins, and tach, etc. white faces on the gauges. Any interest?

I would have interest. What do you need for what you have there?

[VA72C10]

260 shipped for it all...

[1-PU70]

Here is what I have if you want any.

[teeitup]

Jay, I have one coming in probably will be here next week. Thanks Randy

[Field and Son]

Originally Posted by 1-PU70

Here is what I have if you want any.

1-PU70.. How much do you need for these?

[Field and Son]

Originally Posted by teeitup

Jay, I have one coming in probably will be here next week. Thanks Randy

Randy, Let me know when it comes in. I will also pm you this evening in regards to other parts you have there for me...Thanks

[Field and Son]

Originally Posted by VA72C10

I have a nice used tach lens, a used tach that was tested to work but the face is a little rusty, and a complete setup that I was told the tach was inoperable but has the lens, inner, and outer tins, and tach, etc. white faces on the gauges. Any interest?

I am going to pass on these but I appreciate you offering to me.

[1-PU70]

F&S I just want to be clear and not mislead you. Its only one gauge cluster with 4 pics. The cluster has after market gauges in the bottom. Everything works in the cluster ( I had it in my truck for about 10 years). So do you want a price on the cluster and the extra gauges or just the cluster alone.

[Field and Son]

Originally Posted by 1-PU70

F&S I just want to be clear and not mislead you. Its only one gauge cluster with 4 pics. The cluster has after market gauges in the bottom. Everything works in the cluster ( I had it in my truck for about 10 years). So do you want a price on the cluster and the extra gauges or just the cluster alone.

Can you price the cluster seperate and the gauges so it may work either way...Thanks

[1-PU70]

How about $150 for the cluster and I pay shipping. $75 for the gauges and I pay shipping. $200 for everything and I pay shipping.