CA 68 C20 part out - The 1947 - Present Chevrolet & GMC Truck Message Board Network

budnikguy · 08-13-2010, 06:45 PM

Base model and body is pretty good. Interior is pretty bare, I will get pics of it tomorrow. Nothing probably better than driver quality and the drivers side front fender is trash and hood has underhood in trim area rust through. Cab is pretty nice, but bill of sale only. Only pics i have at the moment, will post more tomorrow, anything specific you want to see please request and I will post pics.

Prices are as follows:

rear end 100.00
hood 20.00
bed w/ gate 100.00
cab (bill of sale only) 100.00

please post requests on other parts here and i will post a price

sleepertruck72 · 08-13-2010, 09:11 PM

Interested in cab. How much rust is in the windshield area, rocker, floor areas ? Any close up pics would be appreciated

Thanks !

70-Shorty · 08-13-2010, 09:18 PM

i'd like the hood, the grille, front bumper brackets and the headlight bezels to start. Hows the battery tray and the core support? Where u at in Riverside. I'm in Ontario?
Tim

70-Shorty · 08-13-2010, 09:21 PM

Also need the hood hinges maybe the pass side fender....

you almost look like you're near Pedley or Roubidoux...
Tim

c1069 · 08-13-2010, 11:07 PM

interested on radiator support and grill,. how much?

ralphie628 · 08-14-2010, 01:07 AM

i'm interested in the rear end.. what is the info? gears? posi?
i also need the header panel of the bed and the bed tubs.
power steering pump and brackets? power brake set up?
trailing arms if they are the same for a swb truck. rear glass. will pick up thanks!

novafrog · 08-14-2010, 01:38 AM

interested in tail light harness if not cut up,thanks jimmie

budnikguy · 08-14-2010, 07:36 PM

Here are detailed pics for you...hope this helps. LMK

Adam

Quote:

Originally Posted by sleepertruck72

Interested in cab. How much rust is in the windshield area, rocker, floor areas ? Any close up pics would be appreciated

Thanks !

budnikguy · 08-14-2010, 07:47 PM

Here are a few pics, I will give you a call, in a little bit..

Quote:

Originally Posted by 70-Shorty

i'd like the hood, the grille, front bumper brackets and the headlight bezels to start. Hows the battery tray and the core support? Where u at in Riverside. I'm in Ontario?
Tim

budnikguy · 08-14-2010, 07:48 PM

see pics..and you are second in line....

Quote:

Originally Posted by c1069

interested on radiator support and grill,. how much?

ckexswb · 08-14-2010, 08:08 PM

If windshield is worthy and for sale... let me know. thanks randy

ralphie628 · 08-15-2010, 01:34 AM

Quote:

Originally Posted by ralphie628

i'm interested in the rear end.. what is the info? gears? posi?
i also need the header panel of the bed and the bed tubs.
power steering pump and brackets? power brake set up?
trailing arms if they are the same for a swb truck. rear glass. will pick up thanks!

any info on the parts i asked about? thanks

*Puropedo* · 08-15-2010, 04:55 AM

Interested in the headlights (both). Can you please make sure if they work, let me know how much you want, thanks.

VDOG · 08-15-2010, 12:35 PM

As you can see, I need the cab, let me know if it does not sale. Can pick it up.

sleepertruck72 · 08-15-2010, 04:52 PM

Budnikguy,

I appreciate all the pics of the cab. I am going to have to pass, although it seems like a solid cab and it is an awesome deal

I just calculated fuel and trailer rental costs and it kills the deal. Good luck with the sale ! Thanks again

Dano69c10 · 08-15-2010, 05:02 PM

If the whole rolling chassis is for sale at a good price, I'm interested. If the previous person who wants to buy the rear-end falls through let me know.

**fine69** · 08-15-2010, 05:09 PM

PM sent.

budnikguy · 08-16-2010, 01:48 AM

I will be pulling the bed tomorrow and get you more info on the rear end...

Adam

Quote:

Originally Posted by ralphie628

i'm interested in the rear end.. what is the info? gears? posi?
i also need the header panel of the bed and the bed tubs.
power steering pump and brackets? power brake set up?
trailing arms if they are the same for a swb truck. rear glass. will pick up thanks!

budnikguy · 08-16-2010, 01:49 AM

Sorry T3's are gone....

Adam

Quote:

Originally Posted by Puropedo

Interested in the headlights (both). Can you please make sure if they work, let me know how much you want, thanks.

budnikguy · 08-16-2010, 01:57 AM

PM'd ya back...

Quote:

Originally Posted by fine69

PM sent.

budnikguy · 08-16-2010, 01:58 AM

PM'd ya...

Adam
951-544-0721

Quote:

Originally Posted by Dano69c10

If the whole rolling chassis is for sale at a good price, I'm interested. If the previous person who wants to buy the rear-end falls through let me know.

budnikguy · 08-16-2010, 07:23 PM

Radiator support and bare grill, $50.00. lmk..

Adam
951-544-0721

Quote:

Originally Posted by c1069

interested on radiator support and grill,. how much?

budnikguy · 08-16-2010, 07:28 PM

Sorry did not get the bed pulled today....but as per spid it is a 410 rear end, does not state posi, but I will look at it tomorrow. Header panel of bed is spoken for, bed tubs are available, no ps or pb stuff on this truck. The trailing arms are the same for swb and lwb, so i can help you there too.

Adam
951-544-0721

Quote:

Originally Posted by ralphie628

i'm interested in the rear end.. what is the info? gears? posi?
i also need the header panel of the bed and the bed tubs.
power steering pump and brackets? power brake set up?
trailing arms if they are the same for a swb truck. rear glass. will pick up thanks!

budnikguy · 08-16-2010, 07:29 PM

you need the wiring from taillights to the cab? lmk?

Quote:

Originally Posted by novafrog

interested in tail light harness if not cut up,thanks jimmie

c1069 · 08-16-2010, 08:18 PM

pm sent

08-13-2010, 06:45 PM	#1
budnikguy Registered User Join Date: Sep 2007 Location: Riverside, CA Posts: 4,316	68 C20 part out Base model and body is pretty good. Interior is pretty bare, I will get pics of it tomorrow. Nothing probably better than driver quality and the drivers side front fender is trash and hood has underhood in trim area rust through. Cab is pretty nice, but bill of sale only. Only pics i have at the moment, will post more tomorrow, anything specific you want to see please request and I will post pics. Prices are as follows: rear end 100.00 hood 20.00 bed w/ gate 100.00 cab (bill of sale only) 100.00 please post requests on other parts here and i will post a price

08-13-2010, 09:11 PM	#2
sleepertruck72 Registered User Join Date: Nov 2007 Location: Turlock California 95380 Posts: 2,075	Re: 68 C20 part out Interested in cab. How much rust is in the windshield area, rocker, floor areas ? Any close up pics would be appreciated Thanks ! __________________ 72 C20 Longbed 05 1500 Z71

08-13-2010, 09:18 PM	#3
70-Shorty Registered User Join Date: Jul 2010 Location: Ontario CA Posts: 317	Re: 68 C20 part out i'd like the hood, the grille, front bumper brackets and the headlight bezels to start. Hows the battery tray and the core support? Where u at in Riverside. I'm in Ontario? Tim __________________ Ontario CA•70 Chevy Shortbed Fleetside C-10 71 Chevy Longbed Fleetside C-20 (sold ) 63 Chevy II Nova SS 02 Ford F-150 Harley-Davidson supercharged 5.4 2000 Harley Roadking Hot Bike Baggers Mag Shoot http://s263.photobucket.com/albums/i...oot/?start=all some truck lettering & flame jobs http://www.flickr.com/photos/4950319...7602894916215/

08-13-2010, 09:21 PM	#4
70-Shorty Registered User Join Date: Jul 2010 Location: Ontario CA Posts: 317	Re: 68 C20 part out Also need the hood hinges maybe the pass side fender.... you almost look like you're near Pedley or Roubidoux... Tim __________________ Ontario CA•70 Chevy Shortbed Fleetside C-10 71 Chevy Longbed Fleetside C-20 (sold ) 63 Chevy II Nova SS 02 Ford F-150 Harley-Davidson supercharged 5.4 2000 Harley Roadking Hot Bike Baggers Mag Shoot http://s263.photobucket.com/albums/i...oot/?start=all some truck lettering & flame jobs http://www.flickr.com/photos/4950319...7602894916215/

08-13-2010, 11:07 PM	#5
c1069 Registered User Join Date: Apr 2010 Location: McFarland CA Posts: 1,392	Re: 68 C20 part out interested on radiator support and grill,. how much? Last edited by c1069; 08-13-2010 at 11:08 PM.

08-14-2010, 01:07 AM	#6
ralphie628 Registered User Join Date: Dec 2009 Location: Chatsworth CA Posts: 243	Re: 68 C20 part out i'm interested in the rear end.. what is the info? gears? posi? i also need the header panel of the bed and the bed tubs. power steering pump and brackets? power brake set up? trailing arms if they are the same for a swb truck. rear glass. will pick up thanks!

08-14-2010, 01:38 AM	#7
novafrog Registered User Join Date: Apr 2009 Location: dunlow wv Posts: 435	Re: 68 C20 part out interested in tail light harness if not cut up,thanks jimmie

08-14-2010, 08:08 PM	#11
ckexswb 67-72=-5 Join Date: Jun 2007 Location: calif/ beach Posts: 807	Re: 68 C20 part out If windshield is worthy and for sale... let me know. thanks randy

08-15-2010, 04:55 AM	#13
Puropedo Account Suspended Join Date: Nov 2008 Location: Prunedale California Posts: 782	Re: 68 C20 part out Interested in the headlights (both). Can you please make sure if they work, let me know how much you want, thanks.

08-15-2010, 12:35 PM	#14
VDOG Grand PooBaa Member Join Date: Jan 2001 Location: LA, CA Posts: 5,302	Re: 68 C20 part out As you can see, I need the cab, let me know if it does not sale. Can pick it up. Attached Images

08-15-2010, 04:52 PM	#15
sleepertruck72 Registered User Join Date: Nov 2007 Location: Turlock California 95380 Posts: 2,075	Re: 68 C20 part out Budnikguy, I appreciate all the pics of the cab. I am going to have to pass, although it seems like a solid cab and it is an awesome deal I just calculated fuel and trailer rental costs and it kills the deal. Good luck with the sale ! Thanks again __________________ 72 C20 Longbed 05 1500 Z71

08-15-2010, 05:02 PM	#16
Dano69c10 Senior Member Join Date: Jan 2005 Location: Ontario, Kali Posts: 2,427	Re: 68 C20 part out If the whole rolling chassis is for sale at a good price, I'm interested. If the previous person who wants to buy the rear-end falls through let me know. __________________ '69 Fleet It ain't yours, if you didn't build it! Last edited by Dano69c10; 08-15-2010 at 05:05 PM.

08-15-2010, 05:09 PM	#17
fine69 Senior Member Join Date: Dec 1999 Location: Urbana,Ohio,USA Posts: 4,618	Re: 68 C20 part out PM sent. __________________ 2008 Chevy HHR 1/2 panel. 1949 Chevy Panel truck(just sittin, waiting) Board member #6

08-16-2010, 08:18 PM	#25
c1069 Registered User Join Date: Apr 2010 Location: McFarland CA Posts: 1,392	Re: 68 C20 part out pm sent



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.