CA Parting out 88 suburban 3/4 ton 4x4 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

KrazyRay · 08-18-2010, 01:22 AM

I have a sub that had an electrical fire in the engine bay so the tbi harness is no good. The 5.7 tbi engine runs good (until fire) and it had a turbo 400/208 that is already sold. The front doors are pending local sale and I'm going to hold on to the front seats for now. Please respond in thread to avoid confusion. Thanks, Ray
tbi engine 110k miles $350 local
front clip $150 local
aux battery tray $25 plus shipping
tow hooks $25 plus shipping
oil cooler with hoses $25 plus shipping
side mirrors $30 pair plus shipping
power steering box $30 plus shipping
power steering pump $30 plus shipping
th400 4x4 flywheel cover $30 plus shipping
If there is anything you need just ask in thread and I will respond asap.

KrazyRay · 08-18-2010, 01:24 AM

pics

KrazyRay · 08-18-2010, 01:27 AM

more

**WestButteTruck** · 08-18-2010, 10:32 PM

What kind of shape are the 4 wheel well mouldings in? Also interested in headlight bezels, grille and all the chrome trim that surrounds the headlights and grille. Shipped to 59482

55chevy · 08-18-2010, 11:08 PM

How much for the driver's door pull strap and the two chrome caps? Need two straps actually. Shipped to 32570?

KrazyRay · 08-19-2010, 02:17 AM

Quote:

Originally Posted by WestButteTruck

What kind of shape are the 4 wheel well mouldings in? Also interested in headlight bezels, grille and all the chrome trim that surrounds the headlights and grille. Shipped to 59482

The wheel well trim is junk because the running boards smashed them up. The grille has broken mounting tabs, the chrome trim has dents. The headlight bezels are in good shape. $27 shipped for the bezels. Thanks, Ray

KrazyRay · 08-19-2010, 02:18 AM

Quote:

Originally Posted by 55chevy

How much for the driver's door pull strap and the two chrome caps? Need two straps actually. Shipped to 32570?

The door is pending local sale. If it falls through, I will sell the straps.
Thanks, Ray

**tkeduk8r** · 08-19-2010, 09:38 AM

did it come with skid plates underneath????
--Mike

KrazyRay · 08-19-2010, 10:11 AM

There is a skid plate attached to the trans cross member.

**too much stuff** · 08-19-2010, 05:47 PM

Gauges with a clock? Condition? Thanks.

KrazyRay · 08-19-2010, 11:28 PM

Eric, I will check the gauges on Sat. Thanks, Ray

72K5er · 08-21-2010, 11:04 PM

Got the swaybar for the front? I am looking to convert a 72 K5 over to this style

KrazyRay · 08-22-2010, 02:25 AM

Quote:

Originally Posted by too much stuff

Gauges with a clock? Condition? Thanks.

Eric, the gauges look good, but there is no clock- just an empty space where the clock is normally located.

KrazyRay · 08-22-2010, 02:31 AM

Quote:

Originally Posted by 72K5er

Got the swaybar for the front? I am looking to convert a 72 K5 over to this style

Sorry, that is the first thing to go on every square body 4x4. I have sent out about ten of those. I have an old posting in the 67-72 parts board...4x4 sway bar changeover...
You can look there and see the package that I've been sending out. I will keep you in mind when I have another one come in. Thanks, Ray

**too much stuff** · 08-22-2010, 11:08 AM

Quote:

Originally Posted by KrazyRay

Eric, the gauges look good, but there is no clock- just an empty space where the clock is normally located.

Thanks for checking.
What do you normally get for a front sway bar with plates?

fermin94 · 08-22-2010, 02:49 PM

I want to convert my 84 3/4 2wd to 4x4 I need the differential and everything need to place on my frame.

let me know what you have and how much.

fermin@infinitus-group or 956-693-9864

SBTork · 08-23-2010, 09:12 PM

Hey Ray, does this 'burb have a skid plate for the gas tank? If so, how much? Thanks in advance.

KrazyRay · 08-23-2010, 10:24 PM

Quote:

Originally Posted by too much stuff

Thanks for checking.
What do you normally get for a front sway bar with plates?

Eric, I now sell them for $80 plus shipping (all sold out). That includes the spring plates, the bar, and the cross member with all of the goodies. I usually recommend dollar store oven cleaner and new bushings.

KrazyRay · 08-23-2010, 10:27 PM

Quote:

Originally Posted by fermin94

I want to convert my 84 3/4 2wd to 4x4 I need the differential and everything need to place on my frame.

let me know what you have and how much.

fermin@infinitus-group or 956-693-9864

I'm not familiar with the conversion. I would think finding a 4x4 roller would be the way to go.

KrazyRay · 08-23-2010, 10:27 PM

Quote:

Originally Posted by SBTork

Hey Ray, does this 'burb have a skid plate for the gas tank? If so, how much? Thanks in advance.

Sorry, no skid plate.

KrazyRay · 08-23-2010, 10:29 PM

Quote:

Originally Posted by SBTork

Hey Ray, does this 'burb have a skid plate for the gas tank? If so, how much? Thanks in advance.

Sorry, no skid plate.

draggin86 · 08-24-2010, 09:17 PM

Can i get the core support Ray?

KrazyRay · 08-24-2010, 09:23 PM

Quote:

Originally Posted by draggin86

Can i get the core support Ray?

Hey Billy, Come on over Wed. I have a few core supports in stock.
Thanks, Ray

DBLSPRT68 · 08-24-2010, 10:21 PM

Ray, condition of steering column? Have key? cruise and wiper switch good? Are the wheels Aluminum or steel chrome? Would you ship them? Might think of other things also.... Got an 89 Burban recently!

KrazyRay · 08-24-2010, 10:27 PM

The steering column was junk. (theft recovery) I'm going to hold on to the wheels right now. Hopefully I can help you with some other parts.
Thanks, Ray

08-18-2010, 01:22 AM	#1
KrazyRay Registered User Join Date: Jun 2009 Location: Oroville, CA Posts: 4,827	Parting out 88 suburban 3/4 ton 4x4 I have a sub that had an electrical fire in the engine bay so the tbi harness is no good. The 5.7 tbi engine runs good (until fire) and it had a turbo 400/208 that is already sold. The front doors are pending local sale and I'm going to hold on to the front seats for now. Please respond in thread to avoid confusion. Thanks, Ray tbi engine 110k miles $350 local front clip $150 local aux battery tray $25 plus shipping tow hooks $25 plus shipping oil cooler with hoses $25 plus shipping side mirrors $30 pair plus shipping power steering box $30 plus shipping power steering pump $30 plus shipping th400 4x4 flywheel cover $30 plus shipping If there is anything you need just ask in thread and I will respond asap. Attached Images

08-18-2010, 01:24 AM	#2
KrazyRay Registered User Join Date: Jun 2009 Location: Oroville, CA Posts: 4,827	Re: Parting out 88 suburban 3/4 ton 4x4 pics Attached Images

08-18-2010, 01:27 AM	#3
KrazyRay Registered User Join Date: Jun 2009 Location: Oroville, CA Posts: 4,827	Re: Parting out 88 suburban 3/4 ton 4x4 more Attached Images

08-18-2010, 10:32 PM	#4
WestButteTruck Kung Fu Master Join Date: Oct 2005 Location: Montana Posts: 547	Re: Parting out 88 suburban 3/4 ton 4x4 What kind of shape are the 4 wheel well mouldings in? Also interested in headlight bezels, grille and all the chrome trim that surrounds the headlights and grille. Shipped to 59482 __________________ 72 GMC SuperCustom 4x4 1972 Chevrolet Cheyenne Super 4x4

08-18-2010, 11:08 PM	#5
55chevy Car Truck Bike Nut Join Date: Aug 2005 Location: Suffolk Virginia Posts: 850	Re: Parting out 88 suburban 3/4 ton 4x4 How much for the driver's door pull strap and the two chrome caps? Need two straps actually. Shipped to 32570? __________________ Snow free Florida panhandle, don't miss Indiana winters Temp in Suffolk Virginia, Sentenced 2 to 5 years LOL 68 shortfleet project 94 3500 TD dually so many cars so little time 72 K2 CST 2WD Blazer Last edited by 55chevy; 08-18-2010 at 11:09 PM.

08-19-2010, 09:38 AM	#8
tkeduk8r Senior Member Join Date: Apr 2001 Location: Alexandria, MN Posts: 1,462	Re: Parting out 88 suburban 3/4 ton 4x4 did it come with skid plates underneath???? --Mike __________________ 63 C20 2WD, 230/SM420/4.11 73K 68 C30 dump truck, 327,SM425,4.56 66K original 68 C10 2WD SWB Stepper, 250/3-tree/3.73 66K.... Wifes 68 Buick Skylark Custom Conv., 350/TH400/2.56 In our family since '79 69 GMC 1500 SWB 2WD, 350/TH350/3.73 posi... 70 K10 SWB 4X4 4-sp,ps, pb, tilt, buckets, console, sliding back window (Need AC parts) WIP 72 Chevy K20 4x4 350/350/205/4.56 donor 72 Vette 350/M21/3.70 posi, triple black and super fast 84 Olds Cutlass Brougham 350/2004r/4.11 was Dad's

08-19-2010, 10:11 AM	#9
KrazyRay Registered User Join Date: Jun 2009 Location: Oroville, CA Posts: 4,827	Re: Parting out 88 suburban 3/4 ton 4x4 There is a skid plate attached to the trans cross member.

08-19-2010, 05:47 PM	#10
too much stuff Roadtrip! Join Date: Feb 2003 Location: Grand Rapids MN Posts: 13,790	Re: Parting out 88 suburban 3/4 ton 4x4 Gauges with a clock? Condition? Thanks. __________________ 67 gmc custom lwb dakota truck. Sold...And bought back 69 swb 4x4 project (in progress) 70 c-10 lwb texas truck 70 4x4/BB/bkts/posi/tach(retired) 70 swb (wifes) 70 jimmy camper 71 K-5 factory 2wd 71 cheyenne 4x4/tach/posi/ plow rig 71 Cheyenne20 BB, buckets, tach, tilt, 4 speed 72 jimmy CST wyoming rig 72 jimmy Colorado rig 72 lifted texas 4x4 3/4 ton burb 65 fury conv. 383/auto 65 chrysler 300 "L" 413 auto

08-19-2010, 11:28 PM	#11
KrazyRay Registered User Join Date: Jun 2009 Location: Oroville, CA Posts: 4,827	Re: Parting out 88 suburban 3/4 ton 4x4 Eric, I will check the gauges on Sat. Thanks, Ray

08-21-2010, 11:04 PM	#12
72K5er Registered User Join Date: May 2008 Location: Upper Falls, MD Posts: 170	Re: Parting out 88 suburban 3/4 ton 4x4 Got the swaybar for the front? I am looking to convert a 72 K5 over to this style

08-22-2010, 02:49 PM	#16
fermin94 Registered User Join Date: Aug 2010 Location: Laredo Texas Posts: 1	Re: Parting out 88 suburban 3/4 ton 4x4 I want to convert my 84 3/4 2wd to 4x4 I need the differential and everything need to place on my frame. let me know what you have and how much. fermin@infinitus-group or 956-693-9864

08-23-2010, 09:12 PM	#17
SBTork Garage wrench Join Date: Feb 2008 Location: LaCrosse, WI Posts: 1,855	Re: Parting out 88 suburban 3/4 ton 4x4 Hey Ray, does this 'burb have a skid plate for the gas tank? If so, how much? Thanks in advance. __________________ -Adam 90 V1500 GMC Suburban 350/700R4/NP241..... 01 Saturn SL1 stock DD.....

08-24-2010, 09:17 PM	#22
draggin86 Registered User Join Date: Aug 2004 Location: Folsom, Ca Posts: 573	Re: Parting out 88 suburban 3/4 ton 4x4 Can i get the core support Ray?

08-24-2010, 10:21 PM	#24
DBLSPRT68 Registered User Join Date: Nov 2000 Location: Ft. Mill, SC USA Posts: 931	Re: Parting out 88 suburban 3/4 ton 4x4 Ray, condition of steering column? Have key? cruise and wiper switch good? Are the wheels Aluminum or steel chrome? Would you ship them? Might think of other things also.... Got an 89 Burban recently! __________________ PROJECT TRUCK: 1985 SWB C10 Silverado Black/Charcoal, 1990 V2500 Suburban, 2018 Suburban, 2005 GMC 2500HD CCSB, 2014 Toyota Camry SE, HAD.....1968 Camaro RS/SS Family owned since new; 350 3 speed SOLD

08-24-2010, 10:27 PM	#25
KrazyRay Registered User Join Date: Jun 2009 Location: Oroville, CA Posts: 4,827	Re: Parting out 88 suburban 3/4 ton 4x4 The steering column was junk. (theft recovery) I'm going to hold on to the wheels right now. Hopefully I can help you with some other parts. Thanks, Ray



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.