TX Complete Big Block/TH400 setup.... - The 1947 - Present Chevrolet & GMC Truck Message Board Network

TxSqueeze · 08-20-2010, 02:43 PM

Getting ready to do an LS swap and will not be needing this setup any longer.

Previous owner said the motor was a 396 but the numbers on the block show it to be a 454. Motor runs very smooth and trans shifts smooth as well. Will come with everything, ie....from carb to oil pan, alternator, power steering pump, brackets, distributor, fuel pump, everything. All would be needed is to bolt it in, and turn the key. Just put in a new gasket and filter in the trans as well. Would like $850 as a complete setup but will entertain reasonable offers. Not looking to separate at the moment, as I would like everything to leave at the same time. I will get pictures posted later this afternoon.

**WIDESIDE72** · 08-20-2010, 10:44 PM

Eagferly awaiting photos

TxSqueeze · 08-21-2010, 12:13 AM

Wife couln't remember where she placed the camera. I found it about 45 minutes ago, so I will for sure have them tomorrow in the A.M.

TxSqueeze · 08-21-2010, 05:26 PM

Sorry for the delay. Had to swap beds on my '05, took longer than planned.

68lowburb · 08-21-2010, 05:33 PM

looking for any parts possible trade ? thanks jimmy

Field and Son · 08-21-2010, 05:35 PM

Do you know what year the motor is or what it is out of originally? I am thinking turbo 400 tranny, is that correct?

TxSqueeze · 08-21-2010, 05:51 PM

Not looking for any trades unless they are LS specific.

Numbers on the block show it to be a 454 from 71-79, dont know what it was originally in. Yes it is a turbo 400.

Field and Son · 08-21-2010, 11:07 PM

I thought this would have sold within 10 minutes of posting. I think this is a steal for a good running 454 with turbo 400. Turnkey engine...WOW. If I were closer I would buy just to have for the next project.

use2bnlp · 08-21-2010, 11:11 PM

hello are you willing to ship? im in alabama

**70STOVEBOLT** · 08-24-2010, 04:29 PM

Put me in line if you're willing to ship. All you would have to do is secure it to a pallet and supply me with a zip code for pickup and I would handle the rest. Let me know.
Thanks.

TxSqueeze · 08-24-2010, 08:50 PM

I am willing to ship and you have dibs if you would like. Zip code is 79731. Pm me with any more questions. Or call 432-559-6362

Thanks,
Austin

**70STOVEBOLT** · 08-25-2010, 10:00 AM

Quote:

Originally Posted by use2bnlp

hello are you willing to ship? im in alabama

I think use2bnlp has first dibs, so I'll let him chime in first.

wpotter · 08-25-2010, 01:53 PM

Still available? Where is Crane Tx? I am in San Antonio Tx and interested for my 68 SWB. Can you give me a phone number to contact you? I have a few questions. Thanks

TxSqueeze · 08-25-2010, 02:45 PM

Quote:

Originally Posted by 70STOVEBOLT

I think use2bnlp has first dibs, so I'll let him chime in first.

We have already talked, he is going a different route.

Quote:

Originally Posted by wpotter

Still available? Where is Crane Tx? I am in San Antonio Tx and interested for my 68 SWB. Can you give me a phone number to contact you? I have a few questions. Thanks

30 minutes South of Midland/Odessa area. 432-559-6362

**70STOVEBOLT** · 08-25-2010, 04:55 PM

Let me get a freight quote on it and I will get back to you tomorrow.

**70STOVEBOLT** · 08-25-2010, 05:03 PM

I know, it's not tomorrow. I'll have to pass, freight will cost too much. Thanks and good luck with your sale. NEXT!!

deek114 · 08-25-2010, 05:27 PM

That is a really good deal. Im suprised nobody has snatched it up yet.

TxSqueeze · 08-26-2010, 03:24 PM

Quote:

Originally Posted by deek114

That is a really good deal. Im suprised nobody has snatched it up yet.

My thoughts exactly

STOCKISH · 08-26-2010, 11:42 PM

Wish you were closer, I would love to have this in my Crerw Cab Short Bed.

gastrader35 · 08-28-2010, 12:10 PM

wow what a deal.. i do not believe this is not sold yet. looks like i should take a road trip.

HavinSomeFun · 08-30-2010, 08:23 AM

sent you a pm

HavinSomeFun · 08-31-2010, 07:53 PM

I didnt end up with it. However, Austin is a straight up and honest guy!

TxSqueeze · 09-01-2010, 04:31 PM

Sold last night guys. Thanks Kevin, and again, sorry for the inconvenience.

08-20-2010, 02:43 PM	#1
TxSqueeze Registered User Join Date: Dec 2008 Location: Crane, Tx Posts: 147	Complete Big Block/TH400 setup.... Getting ready to do an LS swap and will not be needing this setup any longer. Previous owner said the motor was a 396 but the numbers on the block show it to be a 454. Motor runs very smooth and trans shifts smooth as well. Will come with everything, ie....from carb to oil pan, alternator, power steering pump, brackets, distributor, fuel pump, everything. All would be needed is to bolt it in, and turn the key. Just put in a new gasket and filter in the trans as well. Would like $850 as a complete setup but will entertain reasonable offers. Not looking to separate at the moment, as I would like everything to leave at the same time. I will get pictures posted later this afternoon. __________________ 68 SWB- Heads/Cam 6.0 w/4L80E swap in progress

08-20-2010, 10:44 PM	#2
WIDESIDE72 Senior Member Join Date: Aug 2008 Location: Cedar Park, Texas Posts: 7,494	Re: Complete Big Block/TH400 setup.... Eagferly awaiting photos

08-21-2010, 12:13 AM	#3
TxSqueeze Registered User Join Date: Dec 2008 Location: Crane, Tx Posts: 147	Re: Complete Big Block/TH400 setup.... Wife couln't remember where she placed the camera. I found it about 45 minutes ago, so I will for sure have them tomorrow in the A.M. __________________ 68 SWB- Heads/Cam 6.0 w/4L80E swap in progress

08-21-2010, 05:26 PM	#4
TxSqueeze Registered User Join Date: Dec 2008 Location: Crane, Tx Posts: 147	Re: Complete Big Block/TH400 setup.... Sorry for the delay. Had to swap beds on my '05, took longer than planned. __________________ 68 SWB- Heads/Cam 6.0 w/4L80E swap in progress

08-21-2010, 05:33 PM	#5
68lowburb Registered User Join Date: Sep 2006 Location: prairieville, louisiana Posts: 883	Re: Complete Big Block/TH400 setup.... looking for any parts possible trade ? thanks jimmy

08-21-2010, 05:35 PM	#6
Field and Son Registered User Join Date: Nov 2008 Location: Fond du Lac, Wisconsin Posts: 425	Re: Complete Big Block/TH400 setup.... Do you know what year the motor is or what it is out of originally? I am thinking turbo 400 tranny, is that correct?

08-21-2010, 05:51 PM	#7
TxSqueeze Registered User Join Date: Dec 2008 Location: Crane, Tx Posts: 147	Re: Complete Big Block/TH400 setup.... Not looking for any trades unless they are LS specific. Numbers on the block show it to be a 454 from 71-79, dont know what it was originally in. Yes it is a turbo 400. __________________ 68 SWB- Heads/Cam 6.0 w/4L80E swap in progress

08-21-2010, 11:07 PM	#8
Field and Son Registered User Join Date: Nov 2008 Location: Fond du Lac, Wisconsin Posts: 425	Re: Complete Big Block/TH400 setup.... I thought this would have sold within 10 minutes of posting. I think this is a steal for a good running 454 with turbo 400. Turnkey engine...WOW. If I were closer I would buy just to have for the next project.

08-21-2010, 11:11 PM	#9
use2bnlp Registered User Join Date: Jul 2010 Location: bham,alabama Posts: 58	Re: Complete Big Block/TH400 setup.... hello are you willing to ship? im in alabama

08-24-2010, 04:29 PM	#10
70STOVEBOLT Senior Member Join Date: Jun 2005 Location: Winona Lake, IN Posts: 6,265	Re: Complete Big Block/TH400 setup.... Put me in line if you're willing to ship. All you would have to do is secure it to a pallet and supply me with a zip code for pickup and I would handle the rest. Let me know. Thanks. __________________ 70 C/10 SWB 402/TH400/3.73 "The Needy Beast" 200,000 Mile Club Disc Brake Club Owner installed options: Front Sway Bar Power Steering Power Brakes Cigar Lighter Courtesy Lights Deluxe Side Markers Wiper Delay Power windows Power Locks Sniper EFI 2015 Silverado 1500 LS 4.3/6L80/3.23 lowered 2" front & rear

08-24-2010, 08:50 PM	#11
TxSqueeze Registered User Join Date: Dec 2008 Location: Crane, Tx Posts: 147	Re: Complete Big Block/TH400 setup.... I am willing to ship and you have dibs if you would like. Zip code is 79731. Pm me with any more questions. Or call 432-559-6362 Thanks, Austin __________________ 68 SWB- Heads/Cam 6.0 w/4L80E swap in progress

08-25-2010, 01:53 PM	#13
wpotter Registered User Join Date: Feb 2009 Location: Adkins Texas Posts: 157	Re: Complete Big Block/TH400 setup.... Still available? Where is Crane Tx? I am in San Antonio Tx and interested for my 68 SWB. Can you give me a phone number to contact you? I have a few questions. Thanks

08-25-2010, 04:55 PM	#15
70STOVEBOLT Senior Member Join Date: Jun 2005 Location: Winona Lake, IN Posts: 6,265	Re: Complete Big Block/TH400 setup.... Let me get a freight quote on it and I will get back to you tomorrow. __________________ 70 C/10 SWB 402/TH400/3.73 "The Needy Beast" 200,000 Mile Club Disc Brake Club Owner installed options: Front Sway Bar Power Steering Power Brakes Cigar Lighter Courtesy Lights Deluxe Side Markers Wiper Delay Power windows Power Locks Sniper EFI 2015 Silverado 1500 LS 4.3/6L80/3.23 lowered 2" front & rear

08-25-2010, 05:03 PM	#16
70STOVEBOLT Senior Member Join Date: Jun 2005 Location: Winona Lake, IN Posts: 6,265	Re: Complete Big Block/TH400 setup.... I know, it's not tomorrow. I'll have to pass, freight will cost too much. Thanks and good luck with your sale. NEXT!! __________________ 70 C/10 SWB 402/TH400/3.73 "The Needy Beast" 200,000 Mile Club Disc Brake Club Owner installed options: Front Sway Bar Power Steering Power Brakes Cigar Lighter Courtesy Lights Deluxe Side Markers Wiper Delay Power windows Power Locks Sniper EFI 2015 Silverado 1500 LS 4.3/6L80/3.23 lowered 2" front & rear

08-25-2010, 05:27 PM	#17
deek114 Registered User Join Date: Jan 2009 Location: decatur, IL. Posts: 162	Re: Complete Big Block/TH400 setup.... That is a really good deal. Im suprised nobody has snatched it up yet. __________________ Friends don't let friends drive fords.



Register or Log In To remove these advertisements.

08-26-2010, 11:42 PM	#19
STOCKISH Formerly- 1972SuperCheyenne Join Date: Oct 2008 Location: Wake Forest NC Posts: 5,782	Re: Complete Big Block/TH400 setup.... Wish you were closer, I would love to have this in my Crerw Cab Short Bed. __________________ --Josh My Build Thread:http://67-72chevytrucks.com/vboard/s...d.php?t=799218 A good crossthread is better than Loctite any day. Life is not about what you have, but who you have to share it with.

08-28-2010, 12:10 PM	#20
gastrader35 HOARDING SPECIALIST Join Date: Sep 2009 Location: SOUTH CHARLESTON OHIO Posts: 124	Re: Complete Big Block/TH400 setup.... wow what a deal.. i do not believe this is not sold yet. looks like i should take a road trip.

08-30-2010, 08:23 AM	#21
HavinSomeFun Still Just Havin Some Fun! Join Date: Jun 2007 Location: Piedmont, Oklahoma Posts: 1,145	Re: Complete Big Block/TH400 setup.... sent you a pm __________________ a green one with some stuff done to it....

08-31-2010, 07:53 PM	#22
HavinSomeFun Still Just Havin Some Fun! Join Date: Jun 2007 Location: Piedmont, Oklahoma Posts: 1,145	Re: Complete Big Block/TH400 setup.... I didnt end up with it. However, Austin is a straight up and honest guy! __________________ a green one with some stuff done to it.... Last edited by HavinSomeFun; 08-31-2010 at 11:04 PM.

09-01-2010, 04:31 PM	#23
TxSqueeze Registered User Join Date: Dec 2008 Location: Crane, Tx Posts: 147	Re: Complete Big Block/TH400 setup.... Sold last night guys. Thanks Kevin, and again, sorry for the inconvenience. __________________ 68 SWB- Heads/Cam 6.0 w/4L80E swap in progress

Register or Log In To remove these advertisements.