front sway bar brackets - The 1947 - Present Chevrolet & GMC Truck Message Board Network

GmtGmt · 08-20-2010, 03:58 PM

Where can i buy sway bar brackets for a 1 Ton truck?
are they the same for 1/2 and 3/4 just diffrent bushings?

mines are shot

SBTork · 08-20-2010, 05:25 PM

The C10/20/30 brackets are all the same, just different size bushings. You should be fine with a set out of a salvage yard or some re-pops from LMC or ClassicParts.

joe231 · 08-20-2010, 05:29 PM

do you need the bracket and bushing that goes around the sway bar or the brackets that are riveted to the frame from the factory?

http://www.classicparts.com/1973-91-...ctinfo/74-832/

http://www.classicparts.com/1973-91-...ctinfo/74-838/

08-20-2010, 05:25 PM	#2
SBTork Garage wrench Join Date: Feb 2008 Location: LaCrosse, WI Posts: 1,855	Re: front sway bar brackets The C10/20/30 brackets are all the same, just different size bushings. You should be fine with a set out of a salvage yard or some re-pops from LMC or ClassicParts. __________________ -Adam 90 V1500 GMC Suburban 350/700R4/NP241..... 01 Saturn SL1 stock DD.....

08-20-2010, 05:29 PM	#3
joe231 Registered User Join Date: Dec 2007 Location: Palmer, Alaska Posts: 13,821	Re: front sway bar brackets do you need the bracket and bushing that goes around the sway bar or the brackets that are riveted to the frame from the factory? http://www.classicparts.com/1973-91-...ctinfo/74-832/ http://www.classicparts.com/1973-91-...ctinfo/74-838/ __________________ *CHEVY ONLY* Last edited by joe231; 08-20-2010 at 05:31 PM.



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.