what ceramic headers for a 4/6 drop? - The 1947 - Present Chevrolet & GMC Truck Message Board Network

Orange77 · 08-23-2010, 12:37 AM

Ok ok i know this has been discussed before at least once but i cant find anything for our trucks and since there is no way to filter it on this forum to only search from 73-87 i keep getting info for 67-72. ive heard that chevelle mid length headers work with some members using these http://www.summitracing.com/parts/WLK-86118/ but ive also heard that you can use 88-95 chevy truck headers as well like these http://www.summitracing.com/parts/BI...n/?prefilter=1 im getting all my ducks in order for my 4/6 drop soon after my vintage air set up arrives and is installed just trying to get the headers as well so i can install everything at once. Any input with some pics to help would work great trying to get the exhaust as close to being inside the frame rails as possible.

flamingbig10 · 08-23-2010, 12:55 AM

you can run regular long tubes I'm lower than a 4-6 and I have hooker long tubes with no trouble the trans brace does have problems though on speed bumps and uneven road surfaces

Orange77 · 08-23-2010, 01:12 AM

idk how the roads are where your at but they are terrible in Tucson plus speed bumps and other road conditions would scrape my collectors right away thats why im looking for the mid length ceramic headers to replace my longtube hookers.

KQQL IT · 08-23-2010, 11:24 AM

I used patriot mids for a camaro , i want to say 8021-c and full length i got dougs D310-C. Both fit decent

swb85 · 08-23-2010, 12:19 PM

Wysco longtubes here with a 4/4 drop. My frame rails would hit before the headers would.....

Orange77 · 08-23-2010, 03:07 PM

thanks for the help so far guys any idea what the part numbers are for these headers? i tried the patriot number u gave me KQQL but i didtn come up with anything on summit

KQQL IT · 08-24-2010, 11:30 AM

Hope this helps.
Patriot Exhaust H8021-1 - Patriot Clippster Headers
View Image and Compare
Compare Headers, Clippster, Mid-Length, Steel, Ceramic Coated, Chevy, Small Block, Pair

Part Number: PTE-H8021-1 More Detail …

Estimated Ship Date: Today
I had them on my 73 with a sbc 400, Fit well with angle plug heads also.
Im currently using these tho they dont hang below the frame

Headers, Full-Length, Steel, Ceramic Coated, Chevy, GMC, Blazer, Jimmy, Pickup, Suburban, Small Block, Pair

Part Number: DOU-D310 More Detail …

Estimated Ship Date: Tomorrow
Transaction$599.95

Only pic i can find.

Orange77 · 08-24-2010, 12:28 PM

thanks for the part numbers was in a rush when i checked probably shoulda looked more carefully haha...yea both are nice real nice actually...how low is the truck in the pic running the dougs right?

3r!c84 · 08-24-2010, 12:37 PM

I've got long tube headers on my 5/6 drop with no prob never hit anything

KQQL IT · 08-24-2010, 03:03 PM

Quote:

Originally Posted by Orange77

thanks for the part numbers was in a rush when i checked probably shoulda looked more carefully haha...yea both are nice real nice actually...how low is the truck in the pic running the dougs right?

Probably a 4/6, 2 coils cut and flipped in the back

ECU PIRATE · 08-24-2010, 03:07 PM

Has anyone used the KMJ Performance mid length chrome headers? They are selling on Ebay for $ 109.99 (+ $ 20 shipping). I am looking at them for a alternate since i can't seem to find any shorties that will work with my Muncie M20

http://cgi.ebay.com/ebaymotors/NEW-C...Q5fAccessories

bigwheel15 · 08-24-2010, 08:16 PM

Quote:

Originally Posted by ECU PIRATE

Has anyone used the KMJ Performance mid length chrome headers? They are selling on Ebay for $ 109.99 (+ $ 20 shipping). I am looking at them for a alternate since i can't seem to find any shorties that will work with my Muncie M20

http://cgi.ebay.com/ebaymotors/NEW-C...Q5fAccessories

A friend of mine has that set on his obs truck, I cant speak on how well they will fit ours but I can say they are built well with solid flanges. Hes had them on his truck for about a year or so and has no leaks.

Orange77 · 08-24-2010, 08:25 PM

i was actually thinking of going that route since they also offer a ceramic coated set theres a few brands or sellers if you will that are on ebay with ceramic coated headers...

Orange77 · 08-24-2010, 08:28 PM

http://67-72chevytrucks.com/vboard/s...d.php?t=248222 ive looked at this thread before but im not sure our frames are the same as the 67-72 trucks to use the chevelle headers otherwise i might have to buy some ebay ceramic coated joints to work for now...

08-23-2010, 12:37 AM	#1
Orange77 Registered User Join Date: Apr 2009 Location: Tucson, AZ Posts: 184	what ceramic headers for a 4/6 drop? Ok ok i know this has been discussed before at least once but i cant find anything for our trucks and since there is no way to filter it on this forum to only search from 73-87 i keep getting info for 67-72. ive heard that chevelle mid length headers work with some members using these http://www.summitracing.com/parts/WLK-86118/ but ive also heard that you can use 88-95 chevy truck headers as well like these http://www.summitracing.com/parts/BI...n/?prefilter=1 im getting all my ducks in order for my 4/6 drop soon after my vintage air set up arrives and is installed just trying to get the headers as well so i can install everything at once. Any input with some pics to help would work great trying to get the exhaust as close to being inside the frame rails as possible.

08-23-2010, 12:55 AM	#2
flamingbig10 6.0 powered square Join Date: Feb 2008 Location: Mesquite texas Posts: 3,459	Re: what ceramic headers for a 4/6 drop? you can run regular long tubes I'm lower than a 4-6 and I have hooker long tubes with no trouble the trans brace does have problems though on speed bumps and uneven road surfaces __________________ Aaron 1980 c-10 short bed lowered, cammed 6.0, 4l80e 3600 stall, smp tune, wilwoods, and flames best time so far best et 7.86 @87 on motor 7.57 90 on a 75 shot Build http://67-72chevytrucks.com/vboard/s...d.php?t=283326 Last edited by flamingbig10; 08-23-2010 at 12:56 AM.

08-23-2010, 01:12 AM	#3
Orange77 Registered User Join Date: Apr 2009 Location: Tucson, AZ Posts: 184	Re: what ceramic headers for a 4/6 drop? idk how the roads are where your at but they are terrible in Tucson plus speed bumps and other road conditions would scrape my collectors right away thats why im looking for the mid length ceramic headers to replace my longtube hookers.

08-23-2010, 11:24 AM	#4
KQQL IT At the body shop. Join Date: Aug 2009 Location: Land of fruits and nuts. Posts: 5,316	Re: what ceramic headers for a 4/6 drop? I used patriot mids for a camaro , i want to say 8021-c and full length i got dougs D310-C. Both fit decent __________________ " That didnt make it any newer " " Dont antique the equipment "

08-23-2010, 12:19 PM	#5
swb85 On a budget like Fred Sanford Join Date: Oct 2005 Location: Topeka, KS Posts: 2,031	Re: what ceramic headers for a 4/6 drop? Wysco longtubes here with a 4/4 drop. My frame rails would hit before the headers would..... __________________ '85 Silverado swb: 383 stroker, 10.5:1, vortec heads, 232/238 roller cam, RPM air gap, performer 750 carb, stainless longtubes, 3" duals/super 44's, T56/4.11 383ci build / exterior refresh thread '98 Camaro z28: 370ci twin turbo 370ci build '01 Tahoe LT 4x4: 5.3, longtubes/ory, magnaflow duals, custom tune....wife's DD

08-23-2010, 03:07 PM	#6
Orange77 Registered User Join Date: Apr 2009 Location: Tucson, AZ Posts: 184	Re: what ceramic headers for a 4/6 drop? thanks for the help so far guys any idea what the part numbers are for these headers? i tried the patriot number u gave me KQQL but i didtn come up with anything on summit

08-24-2010, 11:30 AM	#7
KQQL IT At the body shop. Join Date: Aug 2009 Location: Land of fruits and nuts. Posts: 5,316	Re: what ceramic headers for a 4/6 drop? Hope this helps. Patriot Exhaust H8021-1 - Patriot Clippster Headers View Image and Compare Compare Headers, Clippster, Mid-Length, Steel, Ceramic Coated, Chevy, Small Block, Pair Part Number: PTE-H8021-1 More Detail … Estimated Ship Date: Today I had them on my 73 with a sbc 400, Fit well with angle plug heads also. Im currently using these tho they dont hang below the frame Headers, Full-Length, Steel, Ceramic Coated, Chevy, GMC, Blazer, Jimmy, Pickup, Suburban, Small Block, Pair Part Number: DOU-D310 More Detail … Estimated Ship Date: Tomorrow Transaction$599.95 Only pic i can find. __________________ " That didnt make it any newer " " Dont antique the equipment " Last edited by KQQL IT; 08-24-2010 at 11:54 AM.

08-24-2010, 12:28 PM	#8
Orange77 Registered User Join Date: Apr 2009 Location: Tucson, AZ Posts: 184	Re: what ceramic headers for a 4/6 drop? thanks for the part numbers was in a rush when i checked probably shoulda looked more carefully haha...yea both are nice real nice actually...how low is the truck in the pic running the dougs right?

08-24-2010, 12:37 PM	#9
3r!c84 Badass Join Date: Jan 2009 Location: lox. fl Posts: 4,586	Re: what ceramic headers for a 4/6 drop? I've got long tube headers on my 5/6 drop with no prob never hit anything __________________ Think outside the box? -84c10 (1stcar)→My Build← -00 Saturn 5spd drop a gear and disappear! 1/4:13:90

08-24-2010, 03:07 PM	#11
ECU PIRATE Registered User Join Date: Apr 2009 Location: Centreville, Virginia Posts: 846	Re: what ceramic headers for a 4/6 drop? Has anyone used the KMJ Performance mid length chrome headers? They are selling on Ebay for $ 109.99 (+ $ 20 shipping). I am looking at them for a alternate since i can't seem to find any shorties that will work with my Muncie M20 http://cgi.ebay.com/ebaymotors/NEW-C...Q5fAccessories __________________ The Fleet........ 68' Camaro - 1st car (restored & still have it) 09' VW Tiguan (Wife's Daily Driver) 14' VW Passat SE TSI (my personal) 14' Ford Edge Sport (Daily Work Vehicle) 73' SWB Stepside - 77K org. miles 74' LWB 454/TH400 - drive train transplant for my (Sold) 98' SWB C1500 W/T - shop truck (Sold) 90' GMC Sierra SLE short step - aka " Jezabelle " (Sold)

08-24-2010, 08:25 PM	#13
Orange77 Registered User Join Date: Apr 2009 Location: Tucson, AZ Posts: 184	Re: what ceramic headers for a 4/6 drop? i was actually thinking of going that route since they also offer a ceramic coated set theres a few brands or sellers if you will that are on ebay with ceramic coated headers...

08-24-2010, 08:28 PM	#14
Orange77 Registered User Join Date: Apr 2009 Location: Tucson, AZ Posts: 184	Re: what ceramic headers for a 4/6 drop? http://67-72chevytrucks.com/vboard/s...d.php?t=248222 ive looked at this thread before but im not sure our frames are the same as the 67-72 trucks to use the chevelle headers otherwise i might have to buy some ebay ceramic coated joints to work for now...



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.