rally wheels - The 1947 - Present Chevrolet & GMC Truck Message Board Network

61apachespeed · 08-23-2010, 12:51 AM

any one running rally wheels?? got pic's??

markeb01 · 08-23-2010, 01:34 AM

Not sure what style you're after, but here are a few shots of mine with the Corvette style. 15x6 front and 15x7 rear:

**62 Longbed** · 08-23-2010, 03:53 AM

Heres a couple pics of mine still with the 6 lug , running truck rallys .. 15x8 wheels ...

63sbssbbw · 08-23-2010, 09:01 AM

15x8 w/235 75 and early caps
btw those 'vette rallies look great

Rich 5150 69 · 08-23-2010, 10:05 PM

Same blazer ralleys (6 lug )slighty differant center cap.

**DPowers** · 08-24-2010, 03:02 PM

Mine

wlevick · 08-24-2010, 08:00 PM

Yep...15 X 8 with flat caps. Love them!!!

**Captainfab** · 08-24-2010, 11:37 PM

How are you attaching those later model caps to your wheels? I bought a set on ebay, but haven't had the time to do anything with them yet.

Quote:

Originally Posted by DPowers

Mine

chevy_mike · 08-25-2010, 12:23 AM

Quote:

Originally Posted by Captainfab

How are you attaching those later model caps to your wheels? I bought a set on ebay, but haven't had the time to do anything with them yet.

When I bought a set of rallys, they had the later cap on them. I also had the same caps off my '98 Silverado and after comparing them, the later caps have little plugs in the backside, that when removed lined up with the rally bolt holes for the stock caps. Just used sheet metal screws from the backside of the wheel into the cap. Keep in mind this was on a 5 lug rally and caps so not sure if the 6 lug is the same but my guess is they are.

Another option, which is what I am going to do on the '68, I got the external threaded lug nuts with the 1/2" stud threads and then I can use the factory GM "lug caps" that hold the caps on externally, just like my '98 Silverado.

Hope that helps.

**DPowers** · 08-25-2010, 08:36 AM

Like Chevy_Mike said, I went through the back with sheet metal screws. The lug nut holes are big enough that you can use a lug wrench or socket too.

I also have a set of '02 (I believe) 6-lug caps that would have to use the external thread nuts. Haven't played around with them yet.

63 & 64 Bowties · 08-25-2010, 09:04 AM

Quote:

Originally Posted by Captainfab

I bought a set on ebay.

Hey Capt, mind sharing who the seller was? and how much?

*lakeroadster* · 08-25-2010, 02:58 PM

Truck Rallies, the way my truck was when I bought it.

**Captainfab** · 08-26-2010, 12:13 AM

Yeah I had heard about using the screws from the backside but I wsn't sure how well they would stay on the wheel. I had aslo considered getting the OEM style lugnuts for the US thread studs and using the plastic retaining nuts, but I'm not sure if I would like the looks of those nuts on there. I guess I'll play around and see what I like best. Thanks for the replies.

Quote:

Originally Posted by chevy_mike

When I bought a set of rallys, they had the later cap on them. I also had the same caps off my '98 Silverado and after comparing them, the later caps have little plugs in the backside, that when removed lined up with the rally bolt holes for the stock caps. Just used sheet metal screws from the backside of the wheel into the cap. Keep in mind this was on a 5 lug rally and caps so not sure if the 6 lug is the same but my guess is they are.

Another option, which is what I am going to do on the '68, I got the external threaded lug nuts with the 1/2" stud threads and then I can use the factory GM "lug caps" that hold the caps on externally, just like my '98 Silverado.

Hope that helps.

Quote:

Originally Posted by DPowers

Like Chevy_Mike said, I went through the back with sheet metal screws. The lug nut holes are big enough that you can use a lug wrench or socket too.

I also have a set of '02 (I believe) 6-lug caps that would have to use the external thread nuts. Haven't played around with them yet.

**Captainfab** · 08-26-2010, 12:28 AM

Well it was almost a year ago that I bought a couple sets. The '88-'98 set I bought from just an individual that doesn't have a ebay store. I believe I paid around $12.00 plus shipping for those. They were just driver quality. The other set I bought were the newer '99+ style and were nice takeoffs. I bought those from a seller named Mikebo. He has a store with lots of OEM parts. I don't remember just what I paid for those....I want to say around $50.00.

If you do a search for 'Silverado center cap' you should be able to find what you're looking for.

Quote:

Originally Posted by 63 & 64 Bowties

Hey Capt, mind sharing who the seller was? and how much?

The Sub · 08-29-2010, 07:55 PM

Mine Bolt from the back.

djinva · 08-29-2010, 08:07 PM

Just painted my rally wheels red this week. Not sure if I will leave them.

nimrod · 08-30-2010, 11:30 PM

Wheel Vintiques 16" 6-lug Rallyes

08-23-2010, 12:51 AM	#1
61apachespeed Registered User Join Date: Jul 2010 Location: phoenix az Posts: 60	rally wheels any one running rally wheels?? got pic's??

08-23-2010, 01:34 AM	#2
markeb01 Senior Enthusiast Join Date: Feb 2007 Location: Spokane Valley, WA Posts: 8,356	Re: rally wheels Not sure what style you're after, but here are a few shots of mine with the Corvette style. 15x6 front and 15x7 rear:

08-23-2010, 03:53 AM	#3
62 Longbed Senior Member Join Date: Nov 2008 Location: Gresham , Oregon Posts: 588	Re: rally wheels Heres a couple pics of mine still with the 6 lug , running truck rallys .. 15x8 wheels ... Attached Images Last edited by 62 Longbed; 08-23-2010 at 03:55 AM.

08-23-2010, 09:01 AM	#4
63sbssbbw UCA63 Join Date: Aug 2005 Location: Lloydminster AB Can. Posts: 1,637	Re: rally wheels 15x8 w/235 75 and early caps btw those 'vette rallies look great Attached Images __________________ member#7816 "63 sb ss bbw 350\350 12 bolt rear Pwr Fr Disc PS tilt '61 GMC in progress '63 GMC to use for parts '90 Chevy Ext cab sbfs 5.7l (current d d) Last edited by 63sbssbbw; 08-23-2010 at 09:02 AM.

08-23-2010, 10:05 PM	#5
Rich 5150 69 Registered User Join Date: Nov 2009 Location: Galt, Calif Posts: 2,437	Re: rally wheels Same blazer ralleys (6 lug )slighty differant center cap. Attached Images __________________ `64 C10 vortec 350/350/373 posi `69 RS/SS 350/350/308 `37 Ford 406/350/324 traclock `68 Dart 370/904/323 suregrip

08-24-2010, 03:02 PM	#6
DPowers One foot in front of the other Join Date: Aug 2008 Location: Parrottsville, TN Posts: 5,459	Re: rally wheels Mine Attached Images __________________ DP's 66 Build http://67-72chevytrucks.com/vboard/s...d.php?t=361556

08-24-2010, 08:00 PM	#7
wlevick Registered User Join Date: Nov 2009 Location: Saint Petersburg, Florida Posts: 117	Re: rally wheels Yep...15 X 8 with flat caps. Love them!!! Attached Images

08-25-2010, 08:36 AM	#10
DPowers One foot in front of the other Join Date: Aug 2008 Location: Parrottsville, TN Posts: 5,459	Re: rally wheels Like Chevy_Mike said, I went through the back with sheet metal screws. The lug nut holes are big enough that you can use a lug wrench or socket too. I also have a set of '02 (I believe) 6-lug caps that would have to use the external thread nuts. Haven't played around with them yet. __________________ DP's 66 Build http://67-72chevytrucks.com/vboard/s...d.php?t=361556

08-25-2010, 02:58 PM	#12
lakeroadster Account Suspended Join Date: Sep 2009 Location: High Plains of Colorado Posts: 2,485	Re: rally wheels Truck Rallies, the way my truck was when I bought it. Attached Images

08-29-2010, 07:55 PM	#15
The Sub Registered User Join Date: Nov 2008 Location: Union City CA Posts: 79	Re: rally wheels Mine Bolt from the back.

08-29-2010, 08:07 PM	#16
djinva Registered User Join Date: Jan 2010 Location: Dublin VA Posts: 168	Re: rally wheels Just painted my rally wheels red this week. Not sure if I will leave them. Attached Images

08-30-2010, 11:30 PM	#17
nimrod Registered User Join Date: Aug 2009 Location: Willow Glen, Ca Posts: 56	Re: rally wheels Wheel Vintiques 16" 6-lug Rallyes



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.