front upper bag mount drawing? - The 1947 - Present Chevrolet & GMC Truck Message Board Network

m6z · 08-25-2010, 02:04 PM

Does anyone have a cad file or drawing of a front upper bag plate for a c10?

Pict in the link below.

http://www.*****************/bag-brac...t-upper-plates

dv8customs · 08-25-2010, 03:23 PM

They have the same profile as the piece they bolt to. If you are looking to make your own it should be pretty easy to take the measurements you need.

m6z · 08-25-2010, 04:23 PM

Quote:

Originally Posted by dv8customs

They have the same profile as the piece they bolt to. If you are looking to make your own it should be pretty easy to take the measurements you need.

I relize this, but if someone allready has it drawn up I can just have it burned here at work and save me some time.

*Shane* · 08-25-2010, 05:09 PM

Don't ya think the proper thing to do if you're gonna make it yourself is at least do your own design legwork and not copy a board vendor's product?

m6z · 08-25-2010, 05:14 PM

Quote:

Originally Posted by Shane

Don't ya think the proper thing to do if you're gonna make it yourself is at least do your own design legwork and not copy a board vendor's product?

Seriously? It's a bag bracket that several people make. It's not a vendor specific part. It not like I'm trying to get some one to get me the plate files for a dropmember....

If no one has it drawn up I'll go ahead and draw it and then post it up. I'm sure several people on this forum have access to a lazer, waterjet, ect and could make the part themselves with scrap and save themselves some coin.

Hottrucks · 08-25-2010, 05:30 PM

^^^ I agree^^^

*Shane* · 08-25-2010, 06:17 PM

Quote:

Originally Posted by m6z

Seriously? It's a bag bracket that several people make. It's not a vendor specific part. It not like I'm trying to get some one to get me the plate files for a dropmember....

If no one has it drawn up I'll go ahead and draw it and then post it up. I'm sure several people on this forum have access to a lazer, waterjet, ect and could make the part themselves with scrap and save themselves some coin.

It's $35 ... but whatever helps you sleep at night.

m6z · 08-25-2010, 06:36 PM

Quote:

Originally Posted by Shane

It's $35 ... but whatever helps you sleep at night.

+ another $10-15 to ship. I'm not saying boycott the vendors on this site by any means. Hell I've bought a complete dropmember suspension from porterbuilt and I've got a chassis with the front and rear suicidedoors kits on it for my current build.

It's just that this is a basic part that anyone that has access to the equiptment could make on the cheap. So why not?

Hottrucks · 08-25-2010, 06:38 PM

Shane I don't get it it seems like we get into this ( and no hard feelings about it ) sometimes its not the $35 or $$ at all...other times it is..that being said I get a kick out of building something in my tiny little shop with my half Azzed tools that rivals what others are producing and at faction of the cost and with the pride that I did it myself.....

theres alot of info here on the board ..and other boards..that have allowed me to put a c notch in my frame, slam my front suspention to within 2" of dragging, tub and prostreet the rear, getting ready to do a 6 lug disc convertion (stay tuned) and cram a 500 caddy under the hood for pennies on the dollar...of writting a check to buy shiney new parts from the vendors...not that I don't want them to stop building them or not make any $$ but some of use are just more resorceful...

M6Z if you look though my build you will see the measurements to cup you own lower control arms I highly recomend doing it since you seem to have the tools..also If you could tag my build with that drawing or a link to it I think that others will find it useful

thanx

Hottrucks · 08-25-2010, 06:41 PM

you may have to adjust it a bit to fit your truck but heres how I would have started

jlaird · 08-29-2010, 12:19 PM

Quote:

Originally Posted by m6z

I'm sure several people on this forum have access to a lazer, waterjet, ect and could make the part themselves with scrap and save themselves some coin.

Do you mean free access to CNC laser cut or waterjet? Because if not, its cheaper to just buy them. If you are just doing one set, the initial setup charge to laser cut/waterjet will co$t you.

m6z · 08-29-2010, 02:27 PM

Quote:

Originally Posted by jlaird

Do you mean free access to CNC laser cut or waterjet? Because if not, its cheaper to just buy them. If you are just doing one set, the initial setup charge to laser cut/waterjet will co$t you.

Yes, free access through work. I agree it would be cheaper to just buy them If you had to pay for a setup charge.

jlaird · 08-29-2010, 08:25 PM

Quote:

Originally Posted by m6z

Yes, free access through work. I agree it would be cheaper to just buy them If you had to pay for a setup charge.

Sweet! You lucky bum.

m6z · 09-08-2010, 05:30 PM

ttt.....anyone?

shortbed70 · 09-09-2010, 07:23 PM

Quote:

Originally Posted by Hottrucks

you may have to adjust it a bit to fit your truck but heres how I would have started

HAHA Thats how I made mine with a grinder and drill and 1\4" plate.

ol_skool_chevy · 09-09-2010, 07:38 PM

Its a Bag mount for god's sakes.....I agree with HOTTRUCKS...cardboard and a pen you can "engineer" it..
We are not building the Mir Space Station here

*Shane* · 09-09-2010, 11:14 PM

It's easier to steal.

Hottrucks · 09-10-2010, 08:32 AM

Quote:

Originally Posted by Shane

It's easier to steal.

you mean as opposed to finding a piece of steel chasing it down, making a template, cutting it out drilling it correctly painting it or making a phone call???

someone has a signture and it says

I would rather do it myself and spend the extra $500

**N2TRUX** · 09-10-2010, 08:52 AM

Move along guys. Let it go or

roofingbloke · 09-10-2010, 02:42 PM

It must have taken you longer to keep replying to this thread than to take the front wheel off and make a template, trust me, you will feel better for doing it, i asked the same question as i live in the UK and did not want to pay the postage and import duty, its not about copying some elses idea,

Make your own then take the measurements for other people in the future who ask the same question that you have.

Good luck.

08-25-2010, 02:04 PM	#1
m6z Registered User Join Date: Aug 2008 Location: Pittsburg, KS Posts: 2,466	front upper bag mount drawing? Does anyone have a cad file or drawing of a front upper bag plate for a c10? Pict in the link below. http://www.****************/bag-brac...t-upper-plates __________________ Doug Looking for a 67-72 short bed driver..... Last edited by m6z; 08-25-2010 at 02:04 PM.*

08-25-2010, 03:23 PM	#2
dv8customs Registered User Join Date: Jan 2009 Location: East Texas Posts: 1,047	Re: front upper bag mount drawing? They have the same profile as the piece they bolt to. If you are looking to make your own it should be pretty easy to take the measurements you need.

08-25-2010, 05:09 PM	#4
Shane Account Suspended Join Date: Jun 2000 Location: over yonder Posts: 14,270	Re: front upper bag mount drawing? Don't ya think the proper thing to do if you're gonna make it yourself is at least do your own design legwork and not copy a board vendor's product?

08-25-2010, 05:30 PM	#6
Hottrucks Redefining LowBudget Join Date: Mar 2009 Location: lebanon Cow Hampshire Posts: 4,538	Re: front upper bag mount drawing? ^^^ I agree^^^ __________________ 1970 C10 CST fleetside 472 ....big dreams little cash... http://67-72chevytrucks.com/vboard/s...d.php?t=335721 SunShine Syndicate.. Mikes Sandwich Fair Run OCT 8th 2011 http://www.thesandwichfair.com/html/...auto_show.html

08-25-2010, 06:38 PM	#9
Hottrucks Redefining LowBudget Join Date: Mar 2009 Location: lebanon Cow Hampshire Posts: 4,538	Re: front upper bag mount drawing? Shane I don't get it it seems like we get into this ( and no hard feelings about it ) sometimes its not the $35 or $$ at all...other times it is..that being said I get a kick out of building something in my tiny little shop with my half Azzed tools that rivals what others are producing and at faction of the cost and with the pride that I did it myself..... theres alot of info here on the board ..and other boards..that have allowed me to put a c notch in my frame, slam my front suspention to within 2" of dragging, tub and prostreet the rear, getting ready to do a 6 lug disc convertion (stay tuned) and cram a 500 caddy under the hood for pennies on the dollar...of writting a check to buy shiney new parts from the vendors...not that I don't want them to stop building them or not make any $$ but some of use are just more resorceful... M6Z if you look though my build you will see the measurements to cup you own lower control arms I highly recomend doing it since you seem to have the tools..also If you could tag my build with that drawing or a link to it I think that others will find it useful thanx __________________ 1970 C10 CST fleetside 472 ....big dreams little cash... http://67-72chevytrucks.com/vboard/s...d.php?t=335721 SunShine Syndicate.. Mikes Sandwich Fair Run OCT 8th 2011 http://www.thesandwichfair.com/html/...auto_show.html

08-25-2010, 06:41 PM	#10
Hottrucks Redefining LowBudget Join Date: Mar 2009 Location: lebanon Cow Hampshire Posts: 4,538	Re: front upper bag mount drawing? you may have to adjust it a bit to fit your truck but heres how I would have started Attached Images

09-08-2010, 05:30 PM	#14
m6z Registered User Join Date: Aug 2008 Location: Pittsburg, KS Posts: 2,466	Re: front upper bag mount drawing? ttt.....anyone? __________________ Doug Looking for a 67-72 short bed driver.....

09-09-2010, 07:38 PM	#16
ol_skool_chevy Registered User Join Date: May 2010 Location: Hillsboro, Oregon 97123 Posts: 1,300	Re: front upper bag mount drawing? Its a Bag mount for god's sakes.....I agree with HOTTRUCKS...cardboard and a pen you can "engineer" it.. We are not building the Mir Space Station here __________________ Measure with a yard stick Mark with Chalk Cut with a torch Built it yourself, don't count on others to to do it for you or with you. It will never get done

09-09-2010, 11:14 PM	#17
Shane Account Suspended Join Date: Jun 2000 Location: over yonder Posts: 14,270	Re: front upper bag mount drawing? It's easier to steal.

09-10-2010, 08:52 AM	#19
N2TRUX Happy to be here Join Date: Mar 2000 Location: Cypress, TX Posts: 39,021	Re: front upper bag mount drawing? Move along guys. Let it go or __________________ Follow me on Facebook and Instagram @N2trux.com Articles- "Jake" the 84 to 74 crewcab "Elwood" the77_Remix 85 GMC Sierra "Scarlett" "Refining Sierra"

09-10-2010, 02:42 PM	#20
roofingbloke Registered User Join Date: Apr 2009 Location: swindon, england Posts: 290	Re: front upper bag mount drawing? It must have taken you longer to keep replying to this thread than to take the front wheel off and make a template, trust me, you will feel better for doing it, i asked the same question as i live in the UK and did not want to pay the postage and import duty, its not about copying some elses idea, Make your own then take the measurements for other people in the future who ask the same question that you have. Good luck.



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.