Stopping in to say hey from Prescott AZ - The 1947 - Present Chevrolet & GMC Truck Message Board Network

GMR-PERFORMANCE · 08-31-2010, 02:25 PM

Been reading for about a year and have found time to get my 62 back on track. 3 years into it with a frame off.

A few highlights

383 stroker engine, RHS billet heads Carrillo rods, cp pistons, 850 DP race demon, back with a tremec TKO 600 trans close ratio 1-4 with a .64 OD for the hwy( best of both worlds) 3.90 rear gear

Oak bed polished SS strips, in the process of adding the disc brakes hydro boost ( engine has less than 4 inches of vacuum) and PS.

Here is a link to the pics I need to update it, all panels are jammed and I am getting ready to pre fit everything and shim before paint.

A bit about me

I own a custom shop for harleys most of my days are spent building engines or tuning them with the crew. Do our own machine work in house ( me) fab work, normal service work.. Cant wait to get my truck back on the road..

http://good-times.webshots.com/album...-times&start=0

Jerry Jones · 08-31-2010, 03:02 PM

Looks really good.

Welcome aboard from Northern California!

**70cst** · 08-31-2010, 04:46 PM

Very nice work!

Oh yes

and

from Ohio.

1ATony · 08-31-2010, 04:58 PM

welcome to the site.

08-31-2010, 02:25 PM	#1
GMR-PERFORMANCE Registered User Join Date: Aug 2010 Location: Keller TX Posts: 836	Stopping in to say hey from Prescott AZ Been reading for about a year and have found time to get my 62 back on track. 3 years into it with a frame off. A few highlights 383 stroker engine, RHS billet heads Carrillo rods, cp pistons, 850 DP race demon, back with a tremec TKO 600 trans close ratio 1-4 with a .64 OD for the hwy( best of both worlds) 3.90 rear gear Oak bed polished SS strips, in the process of adding the disc brakes hydro boost ( engine has less than 4 inches of vacuum) and PS. Here is a link to the pics I need to update it, all panels are jammed and I am getting ready to pre fit everything and shim before paint. A bit about me I own a custom shop for harleys most of my days are spent building engines or tuning them with the crew. Do our own machine work in house ( me) fab work, normal service work.. Cant wait to get my truck back on the road.. http://good-times.webshots.com/album...-times&start=0 Last edited by GMR-PERFORMANCE; 08-31-2010 at 02:30 PM.

08-31-2010, 03:02 PM	#2
Jerry Jones Happy Camper Join Date: Feb 2006 Location: Northern California Posts: 8,408	Re: Stopping in to say hey from Prescott AZ Looks really good. Welcome aboard from Northern California! __________________ RIP El Jay! Love you brother!

08-31-2010, 04:46 PM	#3
70cst Senior Member Join Date: Feb 2001 Location: New Madison, Ohio Posts: 21,365	Re: Stopping in to say hey from Prescott AZ Very nice work! Oh yes and from Ohio. __________________ A husband can be right...or...A husband can be happy. 67-72 Chevy and GMC Trucks...The Classic Truck for the Classic Folk. 1970 CST Two tone green, 402BB, 400 Automatic, Tach, Buckets, AC, AM-FM, Tilt, GM CB, GM 8 Tract, LWB, etc JOHN 17:3...The better side of "LIFE" Remember: Everyday is a good day...Some are just gooder!

08-31-2010, 04:58 PM	#4
1ATony Registered User Join Date: Oct 2009 Location: Pepperell,Mass Posts: 724	Re: Stopping in to say hey from Prescott AZ welcome to the site.



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.