Where Do you get the fender emblems for 1967 GMC Trucks - The 1947 - Present Chevrolet & GMC Truck Message Board Network

JTS1967 · 09-01-2010, 04:59 PM

I'm new and I have never posted, I hope I put this in the right spot. I have a 1967 GMC k1500 and I don't have any emblems for the fender. I have not been able to find any online. where would I find some.

**too much stuff** · 09-01-2010, 05:55 PM

First off, welcome to the board. Second, you will have to determine which emblems you need. You could post a wanted to buy if you are a supporter... Eric

Slick67 · 09-01-2010, 05:59 PM

Outback truck parts in spring,tx is a good start. Prices are reasonable.......Slick.

mbgmike · 09-01-2010, 06:06 PM

Anyone who sells Trimparts is good. They are the best company making the emblems. They even have the serial number in them.

Here is a link to their site. We sell them for less of course being dealers for them but you can buy direct from them.

In fairness The ones made over seas however are not bad also. We just sell Trimparts Brand. Never a return or complaint on their products

But actually I am not sure anyone makes them for a 1967

**Tim Christian** · 09-01-2010, 07:35 PM

The only emblems I have ever seen on a 67 GMC were the Custom emblems if it was one other than that none at all and noone repos them.

factorystock · 09-02-2010, 11:40 PM

There were no series indentification emblems on 1960 thru 1967 American built GMC pickups,only trim level "custom". There was also a "camper cruiser" emblem in '67.

09-01-2010, 04:59 PM	#1
JTS1967 Registered User Join Date: Jun 2010 Location: Spokane, Washington Posts: 1	Where Do you get the fender emblems for 1967 GMC Trucks I'm new and I have never posted, I hope I put this in the right spot. I have a 1967 GMC k1500 and I don't have any emblems for the fender. I have not been able to find any online. where would I find some.

09-01-2010, 05:55 PM	#2
too much stuff Roadtrip! Join Date: Feb 2003 Location: Grand Rapids MN Posts: 13,790	Re: Where Do you get the fender emblems for 1967 GMC Trucks First off, welcome to the board. Second, you will have to determine which emblems you need. You could post a wanted to buy if you are a supporter... Eric __________________ 67 gmc custom lwb dakota truck. Sold...And bought back 69 swb 4x4 project (in progress) 70 c-10 lwb texas truck 70 4x4/BB/bkts/posi/tach(retired) 70 swb (wifes) 70 jimmy camper 71 K-5 factory 2wd 71 cheyenne 4x4/tach/posi/ plow rig 71 Cheyenne20 BB, buckets, tach, tilt, 4 speed 72 jimmy CST wyoming rig 72 jimmy Colorado rig 72 lifted texas 4x4 3/4 ton burb 65 fury conv. 383/auto 65 chrysler 300 "L" 413 auto

09-01-2010, 05:59 PM	#3
Slick67 Sofa King Crazy!! Join Date: Oct 2008 Location: Houston, TX Posts: 3,090	Re: Where Do you get the fender emblems for 1967 GMC Trucks Outback truck parts in spring,tx is a good start. Prices are reasonable.......Slick. __________________ You found the Tater. *My Blazer Build (New)* - http://67-72chevytrucks.com/vboard/s...d.php?t=654650 *My 67 Build* - http://67-72chevytrucks.com/vboard/s...d.php?t=335650 67 Chevy LWB big window a/c AKA TOTALLED BY A JACKASS. 1972 2wd Blazer "Porterbuilt and Sloshed"

09-01-2010, 06:06 PM	#4
mbgmike Registered User Join Date: Aug 2005 Location: Pasadena,Tx /Pto Pta DR Posts: 5,415	Re: Where Do you get the fender emblems for 1967 GMC Trucks Anyone who sells Trimparts is good. They are the best company making the emblems. They even have the serial number in them. Here is a link to their site. We sell them for less of course being dealers for them but you can buy direct from them. In fairness The ones made over seas however are not bad also. We just sell Trimparts Brand. Never a return or complaint on their products But actually I am not sure anyone makes them for a 1967 Last edited by mbgmike; 09-01-2010 at 06:10 PM.

09-01-2010, 07:35 PM	#5
Tim Christian Senior Member Join Date: Dec 1999 Location: TN/VA Posts: 6,388	Re: Where Do you get the fender emblems for 1967 GMC Trucks The only emblems I have ever seen on a 67 GMC were the Custom emblems if it was one other than that none at all and noone repos them.

09-02-2010, 11:40 PM	#6
factorystock Registered User Join Date: Feb 2007 Location: west coast Posts: 3,396	Re: Where Do you get the fender emblems for 1967 GMC Trucks There were no series indentification emblems on 1960 thru 1967 American built GMC pickups,only trim level "custom". There was also a "camper cruiser" emblem in '67.



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.