2 tone truck paint questions - The 1947 - Present Chevrolet & GMC Truck Message Board Network

srea76 · 09-01-2010, 09:08 PM

Hi guys I have a few questions my painter wanted to know. I will be painting my truck similar to the one below. My painter called me today and wondered if the white in the middle went into the door jams. He also was curious if the roof inside was white originally. I told him even if it was I wanted it all red inside, but was not sure what to say about the jams. Also one more thing was is there a measuring spot etc and where to start the white on bottom and stop it on top? Thanks so much for anyone help and pics would be nice.

jcblue · 09-01-2010, 09:49 PM

i would like to know this too.. I would also like to know more about that truck in teh pic.. i like the way it set and the wheel size

srea76 · 09-01-2010, 09:51 PM

That's the colors I am going with. I seen it posted a while back. I think it is a board members, but not sure. Looks great!

Rafael505 · 09-01-2010, 09:55 PM

well never the less, if it was me i would just paint it that way, (inside) white roof, red dash and also the door panel/jams same as the outside, i think that would look nice, but if im not mistaking the door jams are red and white but the whole interior is all red.

Zoomin · 09-01-2010, 10:44 PM

Here's how I did mine. If you don't paint to that edge, you'll have a vertical red stripe visible in the middle of your white stripe. As you can see, I did red inside as well.

srea76 · 09-01-2010, 10:51 PM

looks good. The roof is red also?

Zoomin · 09-01-2010, 10:54 PM

Yes, with a parchment headliner.

ls1nova71 · 09-01-2010, 11:09 PM

Quote:

Originally Posted by Zoomin

Here's how I did mine. If you don't paint to that edge, you'll have a vertical red stripe visible in the middle of your white stripe. As you can see, I did red inside as well.

Yep, this way is correct. Here's some pics of the inside of the doors the way the factory did them, it's harder to mask, but looks the best. Just ignore all the junk in the background.

Here's some pics of it during painting. http://www.ls1tech.com/forums/conver...0-4l80e-2.html

big_al_71 · 09-02-2010, 10:28 AM

mine is also painted to the bend of the side panel you can barely see it on this pict but I can take apict if needed.

**71blksuper4x4** · 09-02-2010, 12:13 PM

I have an original paint blue and white cab that I am going to be using on my 71' this go around. You should see how nice the factory actually painted the edges of the white.

Trevor

srea76 · 09-02-2010, 08:02 PM

thanks guys this helped a lot.

DALTON · 09-02-2010, 09:48 PM

The red & white truck is the guy from boyds,,,he has his own wheel business called curtis speed. it was in one of the truck mags awhile back

09-01-2010, 09:08 PM	#1
srea76 Registered User Join Date: Nov 2009 Location: Hazlehurst, Ga. Posts: 822	2 tone truck paint questions Hi guys I have a few questions my painter wanted to know. I will be painting my truck similar to the one below. My painter called me today and wondered if the white in the middle went into the door jams. He also was curious if the roof inside was white originally. I told him even if it was I wanted it all red inside, but was not sure what to say about the jams. Also one more thing was is there a measuring spot etc and where to start the white on bottom and stop it on top? Thanks so much for anyone help and pics would be nice. Attached Images __________________ 1972 Custom Deluxe LT1 Gen V Swap "Green Lantern" 1984 Silverado Red Baron-72 c10 Project

09-01-2010, 09:49 PM	#2
jcblue Registered User Join Date: Aug 2007 Location: Elkton, ky Posts: 385	Re: 2 tone truck paint questions i would like to know this too.. I would also like to know more about that truck in teh pic.. i like the way it set and the wheel size

09-01-2010, 09:51 PM	#3
srea76 Registered User Join Date: Nov 2009 Location: Hazlehurst, Ga. Posts: 822	Re: 2 tone truck paint questions That's the colors I am going with. I seen it posted a while back. I think it is a board members, but not sure. Looks great! __________________ 1972 Custom Deluxe LT1 Gen V Swap "Green Lantern" 1984 Silverado Red Baron-72 c10 Project

09-01-2010, 09:55 PM	#4
Rafael505 Registered User Join Date: Oct 2008 Location: Los Town, New mexico Posts: 217	Re: 2 tone truck paint questions well never the less, if it was me i would just paint it that way, (inside) white roof, red dash and also the door panel/jams same as the outside, i think that would look nice, but if im not mistaking the door jams are red and white but the whole interior is all red. __________________ Check out my Photos http://67-72chevytrucks.com/gallery/...ry.php?cat=769 L.L. N.M. 63 chevy c-10 67 chevy c-10 71 chevy Blazer 4x4 Last edited by Rafael505; 09-01-2010 at 10:02 PM.

09-01-2010, 10:44 PM	#5
Zoomin Man of Mini-Talents Join Date: Sep 2009 Location: Oklahoma City, OK Posts: 4,295	Re: 2 tone truck paint questions Here's how I did mine. If you don't paint to that edge, you'll have a vertical red stripe visible in the middle of your white stripe. As you can see, I did red inside as well. Attached Images __________________ Steve Project - Ruth 66 Skylark Project - Lola 60 Biscayne Project - Iron Ox 54 GMC 100 Project - Darth 69 Camaro

09-01-2010, 10:51 PM	#6
srea76 Registered User Join Date: Nov 2009 Location: Hazlehurst, Ga. Posts: 822	Re: 2 tone truck paint questions looks good. The roof is red also? __________________ 1972 Custom Deluxe LT1 Gen V Swap "Green Lantern" 1984 Silverado Red Baron-72 c10 Project

09-01-2010, 10:54 PM	#7
Zoomin Man of Mini-Talents Join Date: Sep 2009 Location: Oklahoma City, OK Posts: 4,295	Re: 2 tone truck paint questions Yes, with a parchment headliner. __________________ Steve Project - Ruth 66 Skylark Project - Lola 60 Biscayne Project - Iron Ox 54 GMC 100 Project - Darth 69 Camaro

09-02-2010, 10:28 AM	#9
big_al_71 Registered User Join Date: Jun 2008 Location: South Florida Posts: 11,375	Re: 2 tone truck paint questions mine is also painted to the bend of the side panel you can barely see it on this pict but I can take apict if needed. Attached Images __________________ Get your facts first, and then you can distort them as much as you please!!!!!. Sylvester's build thread >>>http://67-72chevytrucks.com/vboard/s...ht=big+rebuild

09-02-2010, 12:13 PM	#10
71blksuper4x4 SWB 4x4 Collector Join Date: Jun 2001 Location: Osage City, KS Posts: 5,156	Re: 2 tone truck paint questions I have an original paint blue and white cab that I am going to be using on my 71' this go around. You should see how nice the factory actually painted the edges of the white. Trevor __________________ TREVOR 1970 CST swb 4x4 (speedwarning,cruise,tilt,tach,8track, original red shoulder belts,tow hooks) 1972 Jimmy (soon to be Hickey cloned) 1971 Cheyenne Super 4x4 swb (tilt,tach,buckets, original blue shoulder belts,am/fm,cruise,tow hooks, dealer 8 track) 1972 Cheyenne Super K20 4x4 Custom Camper (tilt, tach, am/fm, tow hooks, bed toolbox, aux gas tank 1972 Cheyenne Super Crew Cab K30 4x4 Duramax, Allison, np205, buckets, tow hooks (CURRENT PROJECT) http://67-72chevytrucks.com/vboard/s...d.php?t=624819 1989 V3500 Crew Cab (454tbi, NV4500, np205) 1970 Chevelle SS (LS5 454,th400,8track,buckets,tach) :2004 Jeep Wrangler Rubicon (daily driver) WTB: 1968-70 Cruise Control Lever

09-02-2010, 08:02 PM	#11
srea76 Registered User Join Date: Nov 2009 Location: Hazlehurst, Ga. Posts: 822	Re: 2 tone truck paint questions thanks guys this helped a lot. __________________ 1972 Custom Deluxe LT1 Gen V Swap "Green Lantern" 1984 Silverado Red Baron-72 c10 Project

09-02-2010, 09:48 PM	#12
DALTON 69 C-10 Short Fleet Join Date: Jul 2007 Location: Roanoke Va & North Myrtle Beach SC Posts: 50	Re: 2 tone truck paint questions The red & white truck is the guy from boyds,,,he has his own wheel business called curtis speed. it was in one of the truck mags awhile back __________________ Tony Dalton



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.