spot weld cutter - The 1947 - Present Chevrolet & GMC Truck Message Board Network

cableguy0 · 09-01-2010, 10:01 PM

what are you guys using for spot weld cutters. Brand and sizes helpful. Which ones are worth buying and last longest.

*Shane* · 09-02-2010, 11:11 PM

i use brad-point drills ... use one that's about 1/32 larger than the weld. you only want to drill thru the top layer ... hard to do with a regular 118 degree point drill.

dwcsr · 09-05-2010, 09:46 PM

Quote:

Originally Posted by Shane

i use brad-point drills ... use one that's about 1/32 larger than the weld. you only want to drill thru the top layer ... hard to do with a regular 118 degree point drill.

I have to agree with the brad point drill bits. Chaep easy to find at the local DIY home center. I've purchased cutters from the cheapest to the top line very expensive cutters. The drill bits are far easier to deal with and do last longer. The stuff we cut is always rusty and crudy and dulls a cutter quickly.

09-01-2010, 10:01 PM	#1
cableguy0 Senior Member Join Date: Apr 2000 Location: Delta,Pa Posts: 14,948	spot weld cutter what are you guys using for spot weld cutters. Brand and sizes helpful. Which ones are worth buying and last longest. __________________ Owner of North Point Car Care in Dundalk Md. We specialize in custom exhaust on both modern and classic vehicles. We are a full service auto shop from classics to modern vehicles. Feel free to contact me with questions. I will give a 10% discount to any board member.

09-02-2010, 11:11 PM	#2
Shane Account Suspended Join Date: Jun 2000 Location: over yonder Posts: 14,270	Re: spot weld cutter i use brad-point drills ... use one that's about 1/32 larger than the weld. you only want to drill thru the top layer ... hard to do with a regular 118 degree point drill.



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.