|
10-29-2001, 06:07 PM
|
#1 |
|
Registered User
Join Date: Jul 2001
Location: pefferlaw ontario canada
Posts: 59
|
sway bars
how hard are these to install and any idea of the cost?
------------------ |
|
|
|
10-29-2001, 07:50 PM
|
#2 |
|
Account Suspended
Join Date: May 2000
Location: IL
Posts: 0
|
new or used ? they are simple to install- grind driver side lower fornt rivet head on the very front smaller crossmember, and pop the rivet out and then use 8 bolts and nuts to hold all the bushing hold downs and the two frame brackets,
------------------ Randy- Lincoln, IL r68c30@hotmail.com ------------- Fleet, currently: 68 C-30 dually dump, driver 72 K5 chassis; partially disassembled 79 G10 sportvan, driver 77 Electra boatcar, driver 76 1500 in pieces, scrap 68 C10 in pieces, scrap America and 68's rule !  [This message has been edited by Fast68Chevy (edited 10-29-2001).] |
|
|
|
 |
| Bookmarks |
|
|
Linear Mode
