Scratching my Head wiring problem - The 1947 - Present Chevrolet & GMC Truck Message Board Network

Big Port Jimmy 6 · 09-10-2010, 08:30 PM

I went to reinstall the wiring on the crew today. I have had the front clip off for the LS swap. I have the "engine" harness Ign oil press water temp etc. I have the front light harness. The connectors nest together at the fuse panel bulkhead. I have one row left exposed on the bulkhead. I cant find any harness that would fit and can't remember taking one out. What would go there? Its an 87 with 454 TBI. Any Ideas? Click on the thumbnail below for a shot of the empty row on the bulkhead.

87chevy.com · 09-10-2010, 10:47 PM

I think thats for the rear tail lights and gas tank stuff... pretty sure, I think there is a piece of metal that holds the harness to the lower side/bottom of the cab... it might have fallen down there..
clint

Big Port Jimmy 6 · 09-11-2010, 11:08 AM

Its amazing how much clearer everything is after a good nights sleep. I walked in the shop this morning pulled the missing plug from behind the wiper motor where I stuck it to keep it out of the way. D'oh at its finest. Jay

1tonchevy · 09-12-2010, 12:25 PM

Quote:

Originally Posted by Big Port Jimmy 6

Its amazing how much clearer everything is after a good nights sleep. I walked in the shop this morning pulled the missing plug from behind the wiper motor where I stuck it to keep it out of the way. D'oh at its finest. Jay

it happens to the best of us

i have done the same

09-10-2010, 08:30 PM	#1
Big Port Jimmy 6 Addicted to Rust Join Date: Dec 2009 Location: Abbeville SC Posts: 1,030	Scratching my Head wiring problem I went to reinstall the wiring on the crew today. I have had the front clip off for the LS swap. I have the "engine" harness Ign oil press water temp etc. I have the front light harness. The connectors nest together at the fuse panel bulkhead. I have one row left exposed on the bulkhead. I cant find any harness that would fit and can't remember taking one out. What would go there? Its an 87 with 454 TBI. Any Ideas? Click on the thumbnail below for a shot of the empty row on the bulkhead. __________________ Current trucks: (48 GMC100 320 inliner) Gone (48 Suburban in pieces) Sold 87 GMC CCSB 5.3 4l60E Daily Driver ECTA National record holder XO/PP We never really grow up, we just learn how to act in public.

09-10-2010, 10:47 PM	#2
87chevy.com BMW & ASE Master Certified Join Date: Feb 2004 Location: Houston, Texas Posts: 1,263	Re: Scratching my Head wiring problem I think thats for the rear tail lights and gas tank stuff... pretty sure, I think there is a piece of metal that holds the harness to the lower side/bottom of the cab... it might have fallen down there.. clint __________________ 1987 Silverado - L83 5.3 w/ 6L80e ,A/C,P/W,P/L,TILT, HID projectors, Wilwood C-10 Pro Spindles w/ 2018 silverado front brakes & C-5 Corvette Rear Disc Brakes 1999 BMW 528i - 5.7 LS1 w/ 4l60e, Ford 8.8 IRS w31 spline posi & FX-r projector retrofit New project: 2006 BMW x5 6cyl AWD to L83 6l80e 4wd to 2WD / RWD A poor man buy's it twice finally got my domain name back, 87chevy.com.... site rework in progress

09-11-2010, 11:08 AM	#3
Big Port Jimmy 6 Addicted to Rust Join Date: Dec 2009 Location: Abbeville SC Posts: 1,030	Re: Scratching my Head wiring problem Its amazing how much clearer everything is after a good nights sleep. I walked in the shop this morning pulled the missing plug from behind the wiper motor where I stuck it to keep it out of the way. D'oh at its finest. Jay __________________ Current trucks: (48 GMC100 320 inliner) Gone (48 Suburban in pieces) Sold 87 GMC CCSB 5.3 4l60E Daily Driver ECTA National record holder XO/PP We never really grow up, we just learn how to act in public.



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.