GA Parting out 72 c10 ac cab with 68 front clip - The 1947 - Present Chevrolet & GMC Truck Message Board Network

srea76 · 09-22-2010, 09:39 PM

OK guys if anyone close is interested I sold my motor and trans today so I have decided to part this truck out. If you see anything you want let me know and I will get prices. If anyone wants it all to part out now I would take 1500.00

10/7/20

Bad bad news today. I am waiting to see it tomorrow, but there was a wreck today near my friends shop. A car pulling into his shop pulled in front of a car in the oncoming lane. The car hit him and then run into the ditch where my truck was parked. He it in driver side door. My friend said it is in bad shape. Not sure yet what is salvageable, but he said it smashed the driver side front end and cab almost to middle of truck.

srea76 · 09-22-2010, 09:42 PM

power steering and brakes, tilt wheel, ac controls without switch and one lever broke, 72 bench seat that needs recovered. Very very solid ac cab. One of the best I have seen. disk brakes on front. I am going to try to sell disc with rolling chassis. Wheels also for sale.

**72k5zl1** · 09-22-2010, 09:44 PM

hows the hood? how much for the tilt?

srea76 · 09-22-2010, 09:52 PM

hood is in good shape. Surface rust here and there, but no holes. It is off a 68 gmc i parted a while back. I also have the chevy hood which is ok shape, but does have some bondo on it and rust. I would take

250.00 for the tilt.

Works perfect in the truck although the shifter just slides in hole and is not bolted in, not sure if it is wrong shifter or what it was that way when I got the truck. Shifts fine, but you can slide it out if you want to easy.

smokinstang70 · 09-22-2010, 10:00 PM

Tilt?

in Savannah... can come this weekend

smokinstang70 · 09-22-2010, 10:01 PM

Cab?

srea76 · 09-22-2010, 10:09 PM

250 on tilt

500 on cab no shipping. You will not find a more solid cab.

70SOL · 09-22-2010, 10:12 PM

How much for grils??

srea76 · 09-22-2010, 10:16 PM

Grill as pictured with inserts

300 shipped or 250 picked up.

**BIG ORANGE** · 09-22-2010, 10:37 PM

Quote:

Originally Posted by smokinstang70

Tilt?

in Savannah... can come this weekend

Are you home yet?? Have you shipped my muffler's yet???
Just asking.............

**GR8-68** · 09-23-2010, 07:27 AM

what repairs does the cab need any? how far from atlanta are you?

srea76 · 09-23-2010, 08:04 AM

The cab needs no repairs except either pop the fuel hole back out or finish the patch on it. Previous owner was moving tank and he did not finish body work there. The rockers and drip rail and cab corners are perfect. I do not see rust anywhere on the cab. No carpet so I can see floor pans easy and they look great. I am 3 hours south of atl.

srea76 · 09-23-2010, 08:09 AM

Here are a few pictures of the cab. Can get more if interested.

srea76 · 09-23-2010, 08:12 AM

More

Fesser · 09-23-2010, 11:04 AM

Would you consider including the linkage that goes to the trans with the tilt? I'd be putting it in a truck that was a manual but will now be an auto so I don't have any of the linkage. Frank

Hellbent · 09-23-2010, 11:18 AM

How much for the bed?

brian mac · 09-23-2010, 11:21 AM

what is the condition of the core support and front fenders?

GobbleStalker · 09-23-2010, 11:41 AM

Whats the passenger door like?

hoss67 · 09-23-2010, 11:47 AM

Is the rear end a posi? If so I would be interested in the posi unit. Thanks Randy

*Puropedo* · 09-23-2010, 12:20 PM

Are the GMC hood letters in good shape? How much? Any close up pics?

srea76 · 09-23-2010, 02:51 PM

Quote:

Originally Posted by Fesser

Would you consider including the linkage that goes to the trans with the tilt? I'd be putting it in a truck that was a manual but will now be an auto so I don't have any of the linkage. Frank

I will throw the linkage in for free and would be 250 plus shipping.

srea76 · 09-23-2010, 02:52 PM

Quote:

Originally Posted by hoss67

Is the rear end a posi? If so I would be interested in the posi unit. Thanks Randy

not posi sorry

srea76 · 09-23-2010, 02:53 PM

Quote:

Originally Posted by Puropedo

Are the GMC hood letters in good shape? How much? Any close up pics?

ok driver shape i will get better pictures 50.00 shipped

srea76 · 09-23-2010, 02:54 PM

Quote:

Originally Posted by Hellbent

How much for the bed?

floor in back bed is homemade decking boards with no metal. Be a good driver bed, but rust holes here and there. I would take 250 for it all.

srea76 · 09-23-2010, 02:55 PM

Quote:

Originally Posted by GobbleStalker

Whats the passenger door like?

doors are good driver doors, but speakers holes are in it and underneath door has rust 75.00 each

09-22-2010, 09:39 PM	#1
srea76 Registered User Join Date: Nov 2009 Location: Hazlehurst, Ga. Posts: 822	Parting out 72 c10 ac cab with 68 front clip OK guys if anyone close is interested I sold my motor and trans today so I have decided to part this truck out. If you see anything you want let me know and I will get prices. If anyone wants it all to part out now I would take 1500.00 10/7/20 Bad bad news today. I am waiting to see it tomorrow, but there was a wreck today near my friends shop. A car pulling into his shop pulled in front of a car in the oncoming lane. The car hit him and then run into the ditch where my truck was parked. He it in driver side door. My friend said it is in bad shape. Not sure yet what is salvageable, but he said it smashed the driver side front end and cab almost to middle of truck. Attached Images __________________ 1972 Custom Deluxe LT1 Gen V Swap "Green Lantern" 1984 Silverado Red Baron-72 c10 Project Last edited by srea76; 10-08-2010 at 12:19 AM.

09-22-2010, 09:42 PM	#2
srea76 Registered User Join Date: Nov 2009 Location: Hazlehurst, Ga. Posts: 822	Re: Parting out 72 c10 ac cab with 68 front clip power steering and brakes, tilt wheel, ac controls without switch and one lever broke, 72 bench seat that needs recovered. Very very solid ac cab. One of the best I have seen. disk brakes on front. I am going to try to sell disc with rolling chassis. Wheels also for sale. __________________ 1972 Custom Deluxe LT1 Gen V Swap "Green Lantern" 1984 Silverado Red Baron-72 c10 Project

09-22-2010, 09:44 PM	#3
72k5zl1 Senior Member Join Date: Feb 2010 Location: bennington, vt Posts: 1,624	Re: Parting out 72 c10 ac cab with 68 front clip hows the hood? how much for the tilt?

09-22-2010, 09:52 PM	#4
srea76 Registered User Join Date: Nov 2009 Location: Hazlehurst, Ga. Posts: 822	Re: Parting out 72 c10 ac cab with 68 front clip hood is in good shape. Surface rust here and there, but no holes. It is off a 68 gmc i parted a while back. I also have the chevy hood which is ok shape, but does have some bondo on it and rust. I would take 250.00 for the tilt. Works perfect in the truck although the shifter just slides in hole and is not bolted in, not sure if it is wrong shifter or what it was that way when I got the truck. Shifts fine, but you can slide it out if you want to easy. __________________ 1972 Custom Deluxe LT1 Gen V Swap "Green Lantern" 1984 Silverado Red Baron-72 c10 Project Last edited by srea76; 09-24-2010 at 08:50 AM.

09-22-2010, 10:00 PM	#5
smokinstang70 Registered User Join Date: Feb 2009 Location: Savannah GA Posts: 505	Re: Parting out 72 c10 ac cab with 68 front clip Tilt? in Savannah... can come this weekend

09-22-2010, 10:01 PM	#6
smokinstang70 Registered User Join Date: Feb 2009 Location: Savannah GA Posts: 505	Re: Parting out 72 c10 ac cab with 68 front clip Cab?

09-22-2010, 10:09 PM	#7
srea76 Registered User Join Date: Nov 2009 Location: Hazlehurst, Ga. Posts: 822	Re: Parting out 72 c10 ac cab with 68 front clip 250 on tilt 500 on cab no shipping. You will not find a more solid cab. __________________ 1972 Custom Deluxe LT1 Gen V Swap "Green Lantern" 1984 Silverado Red Baron-72 c10 Project Last edited by srea76; 09-22-2010 at 10:38 PM.

09-22-2010, 10:12 PM	#8
70SOL Registered User Join Date: Jun 2010 Location: 310-909 CA Posts: 45	Re: Parting out 72 c10 ac cab with 68 front clip How much for grils?? __________________ 1967 Daully 1990 K5 1967 CAMARO-RS 1991 H-D SOFTAIL

09-22-2010, 10:16 PM	#9
srea76 Registered User Join Date: Nov 2009 Location: Hazlehurst, Ga. Posts: 822	Re: Parting out 72 c10 ac cab with 68 front clip Grill as pictured with inserts 300 shipped or 250 picked up. __________________ 1972 Custom Deluxe LT1 Gen V Swap "Green Lantern" 1984 Silverado Red Baron-72 c10 Project

09-23-2010, 07:27 AM	#11
GR8-68 Senior Member Join Date: Jun 2009 Location: Belews Creek , NC Posts: 4,220	Re: Parting out 72 c10 ac cab with 68 front clip what repairs does the cab need any? how far from atlanta are you?

09-23-2010, 08:04 AM	#12
srea76 Registered User Join Date: Nov 2009 Location: Hazlehurst, Ga. Posts: 822	Re: Parting out 72 c10 ac cab with 68 front clip The cab needs no repairs except either pop the fuel hole back out or finish the patch on it. Previous owner was moving tank and he did not finish body work there. The rockers and drip rail and cab corners are perfect. I do not see rust anywhere on the cab. No carpet so I can see floor pans easy and they look great. I am 3 hours south of atl. __________________ 1972 Custom Deluxe LT1 Gen V Swap "Green Lantern" 1984 Silverado Red Baron-72 c10 Project

09-23-2010, 08:09 AM	#13
srea76 Registered User Join Date: Nov 2009 Location: Hazlehurst, Ga. Posts: 822	Re: Parting out 72 c10 ac cab with 68 front clip Here are a few pictures of the cab. Can get more if interested. Attached Images __________________ 1972 Custom Deluxe LT1 Gen V Swap "Green Lantern" 1984 Silverado Red Baron-72 c10 Project

09-23-2010, 08:12 AM	#14
srea76 Registered User Join Date: Nov 2009 Location: Hazlehurst, Ga. Posts: 822	Re: Parting out 72 c10 ac cab with 68 front clip More Attached Images __________________ 1972 Custom Deluxe LT1 Gen V Swap "Green Lantern" 1984 Silverado Red Baron-72 c10 Project

09-23-2010, 11:04 AM	#15
Fesser Registered User Join Date: Feb 2010 Location: Napa, CA Posts: 519	Re: Parting out 72 c10 ac cab with 68 front clip Would you consider including the linkage that goes to the trans with the tilt? I'd be putting it in a truck that was a manual but will now be an auto so I don't have any of the linkage. Frank

09-23-2010, 11:18 AM	#16
Hellbent Don't blame the messenger Join Date: Nov 2009 Location: Summerville, SC Posts: 318	Re: Parting out 72 c10 ac cab with 68 front clip How much for the bed? __________________ On the Level Just a guy with a hammer and a grinder. OH!, and an HOA- enough said...: http://67-72chevytrucks.com/vboard/s...d.php?t=372525 "Some drink from the fountain of knowledge while others just gargle."



Register or Log In To remove these advertisements.

09-23-2010, 11:21 AM	#17
brian mac Registered User Join Date: Dec 2008 Location: eufaula,alabama Posts: 198	Re: Parting out 72 c10 ac cab with 68 front clip what is the condition of the core support and front fenders?

09-23-2010, 11:41 AM	#18
GobbleStalker GobbleStalker Calls Join Date: Aug 2010 Location: Port Hope, Ontario Posts: 653	Re: Parting out 72 c10 ac cab with 68 front clip Whats the passenger door like? __________________ 72 Chev Longbox Highlander edition. Med Olive/White/ Med Olive 350 4bbl with 350Turbo trans. Truck currently under construction. Project Cappaccino. Stay Tuned! 1967 Chevy C10, 327, 4.11 posi 3 spd. The Driver Truck! SOLD! 09 GMC Sierra SLT All Terrain pkg. 2014 Jeep Wrangler Sahara unlimited. ( The wifes ride )

09-23-2010, 11:47 AM	#19
hoss67 Registered User Join Date: Jun 2009 Location: Harrisville, MS Posts: 267	Re: Parting out 72 c10 ac cab with 68 front clip Is the rear end a posi? If so I would be interested in the posi unit. Thanks Randy

09-23-2010, 12:20 PM	#20
Puropedo Account Suspended Join Date: Nov 2008 Location: Prunedale California Posts: 782	Re: Parting out 72 c10 ac cab with 68 front clip Are the GMC hood letters in good shape? How much? Any close up pics?

Register or Log In To remove these advertisements.