MN Parting: 72 cheyenne longhorn - The 1947 - Present Chevrolet & GMC Truck Message Board Network

**too much stuff** · 09-23-2010, 09:45 PM

Really not much left and it will be crushed within a week. Truck was a cheyenne, longhorn, big block/auto truck.
Manual trans, $50. No ship. (not sure what it is out of)
Power brake brackets. $25
windshield chrome, couple small dings. $35
Cargo light, $30
Box sides may be spoken for.
I realize this is rough, but if you need something, ask and i will price. Shipping is extra.

**too much stuff** · 09-23-2010, 09:51 PM

Few more pics... And no it won't buff out...
Trans hump, $25
Cheyenne roof i will cut off if there is interest, but no ship. I think it was pretty nice. $75
Heater controls are spoken for.

70LonghornCST · 09-23-2010, 10:41 PM

I really need the mounting screws and spacers for attaching the cargo light to the cab roof. I don't need the lamp, though. I bought an NOS and need OEM mounting parts. How much shipped to 95355?

twostiks · 09-24-2010, 05:31 AM

I'll take the power brake brackets. I need the proportioning valve bracket and the support rods to the firewall if they are there. It's hard to tell in the pic. Shipped to 24153. Thanks

gsxrdoug · 09-24-2010, 05:57 AM

If your bid for the side box falls through please hit me up, very interested.

gsxrdoug · 09-24-2010, 05:58 AM

Passenger side if they aren't the same and would be interested in the door to the box as well.

gsxrdoug · 09-24-2010, 06:41 AM

Are there any longhorn emblems left?

OLEBEATER · 09-24-2010, 07:13 AM

What shape is the paint divider on the back of cab? If in good shape what would cost be shipped to 22435? Thanks.............

Chris H · 09-24-2010, 09:14 AM

Hi Eric!
4.10 Eaton center section? I have a locker waiting, just need a clean 4.10 setup.

**too much stuff** · 09-24-2010, 09:45 AM

Richard, PM sent.
Twostiks, i have you down for the brake parts,
gsxrdoug, No emblems, and no toolbox door. I will let you know on the sides if the other guy passes.
OLEBEATER, i think it had a few dings. I will double check.
Chris, PM sent.

I will have the truck here tomorrow and will verify condition and shipping prices for everyone. Eric

gsxrdoug · 09-24-2010, 09:46 AM

Thanks

gsxrdoug · 09-24-2010, 09:48 AM

If the other guy bails I'm really only looking for the box in the side if that can be pulled.

My72BB · 09-24-2010, 04:47 PM

Dang...That was a really loaded up truck in its day! I hate rust!

It looks like it has the factory aux fuel tank? If so whats left of switch/wiring/cover in bed and or tank?

Thanks, Alan

**too much stuff** · 09-25-2010, 02:02 PM

Got her home and can pull some parts today and tomorrow.

MY72BB, nothing good for what you need. Either rusted or missing parts.
OLEBEATER, Plenty of dings. $15 plus ship.
gsxrdoug, i will check out the tool box. Looked like it had a hole in back...

**too much stuff** · 09-25-2010, 03:41 PM

Almost ready for the crusher...
Pics for twostiks, richard, and gsxrdoug.

**too much stuff** · 09-25-2010, 11:08 PM

This gem is almost out of here! Speak up if you see anything...

72supermike · 09-26-2010, 02:56 AM

how about the steering wheel? is it there? Is it black? if so, what condition?

**too much stuff** · 09-26-2010, 09:27 AM

Quote:

Originally Posted by 72supermike

how about the steering wheel? is it there? Is it black? if so, what condition?

Steering wheel and column are junk.

lchall · 09-26-2010, 10:20 AM

If it gets down to the end and you still have the fenders/bedsides I would be interested in the 4 side marker areas. That is if you would want to cut them out and they are in good shape. I would like the side marker and 2-3 inches around.

OLEBEATER · 09-26-2010, 11:15 AM

I'll pass on the cab trim, thanks anyway.

**too much stuff** · 09-26-2010, 09:32 PM

Pm's sent to those looking for parts.
This truck is done and out of here tomorrow. No more parts from this one.
I did pull a saddle headliner and visors in driver shape. $45 on the headliner, and $25 on the visors plus shipping.

09-23-2010, 09:45 PM	#1
too much stuff Roadtrip! Join Date: Feb 2003 Location: Grand Rapids MN Posts: 13,852	Parting: 72 cheyenne longhorn Really not much left and it will be crushed within a week. Truck was a cheyenne, longhorn, big block/auto truck. Manual trans, $50. No ship. (not sure what it is out of) Power brake brackets. $25 windshield chrome, couple small dings. $35 Cargo light, $30 Box sides may be spoken for. I realize this is rough, but if you need something, ask and i will price. Shipping is extra. Attached Images __________________ 67 gmc custom lwb dakota truck. Sold...And bought back 69 swb 4x4 project (in progress) 70 c-10 lwb texas truck 70 4x4/BB/bkts/posi/tach(retired) 70 swb (wifes) 70 jimmy camper 71 K-5 factory 2wd 71 cheyenne 4x4/tach/posi/ plow rig 71 Cheyenne20 BB, buckets, tach, tilt, 4 speed 72 jimmy CST wyoming rig 72 jimmy Colorado rig 72 lifted texas 4x4 3/4 ton burb 65 fury conv. 383/auto 65 chrysler 300 "L" 413 auto

09-23-2010, 09:51 PM	#2
too much stuff Roadtrip! Join Date: Feb 2003 Location: Grand Rapids MN Posts: 13,852	Re: Parting: 72 cheyenne longhorn Few more pics... And no it won't buff out... Trans hump, $25 Cheyenne roof i will cut off if there is interest, but no ship. I think it was pretty nice. $75 Heater controls are spoken for. Attached Images __________________ 67 gmc custom lwb dakota truck. Sold...And bought back 69 swb 4x4 project (in progress) 70 c-10 lwb texas truck 70 4x4/BB/bkts/posi/tach(retired) 70 swb (wifes) 70 jimmy camper 71 K-5 factory 2wd 71 cheyenne 4x4/tach/posi/ plow rig 71 Cheyenne20 BB, buckets, tach, tilt, 4 speed 72 jimmy CST wyoming rig 72 jimmy Colorado rig 72 lifted texas 4x4 3/4 ton burb 65 fury conv. 383/auto 65 chrysler 300 "L" 413 auto

09-23-2010, 10:41 PM	#3
70LonghornCST Moderator Join Date: Jun 2008 Location: Modesto, CA Posts: 5,775	Re: Parting: 72 cheyenne longhorn I really need the mounting screws and spacers for attaching the cargo light to the cab roof. I don't need the lamp, though. I bought an NOS and need OEM mounting parts. How much shipped to 95355? __________________ 2018 Chevy Crew Cab 2006 Impala SS 1965 Plymouth Sport Fury 1970 Chevy Longhorn Bucket Seats Shoulder Belts Front Tow Hooks Factory Air Factory Speedwarning, Tach & Vaccum Factory Tilt CST Package AM/FM Radio Bumper Guards Richard 70 Longhorn CST Build Adding an AM/FM Decal

09-24-2010, 05:31 AM	#4
twostiks Registered User Join Date: Apr 2010 Location: Salem,VA Posts: 14	Re: Parting: 72 cheyenne longhorn I'll take the power brake brackets. I need the proportioning valve bracket and the support rods to the firewall if they are there. It's hard to tell in the pic. Shipped to 24153. Thanks __________________ 69 3/4 Ton GMC CamperSpecial 99 Suburban 2500

09-24-2010, 05:57 AM	#5
gsxrdoug 1970 C10 six Join Date: Aug 2010 Location: Honolulu, Hawaii Posts: 186	Re: Parting: 72 cheyenne longhorn If your bid for the side box falls through please hit me up, very interested. __________________ 1970 C10 L6 250 three speeder

09-24-2010, 05:58 AM	#6
gsxrdoug 1970 C10 six Join Date: Aug 2010 Location: Honolulu, Hawaii Posts: 186	Re: Parting: 72 cheyenne longhorn Passenger side if they aren't the same and would be interested in the door to the box as well. __________________ 1970 C10 L6 250 three speeder

09-24-2010, 06:41 AM	#7
gsxrdoug 1970 C10 six Join Date: Aug 2010 Location: Honolulu, Hawaii Posts: 186	Re: Parting: 72 cheyenne longhorn Are there any longhorn emblems left? __________________ 1970 C10 L6 250 three speeder

09-24-2010, 07:13 AM	#8
OLEBEATER Registered User Join Date: Mar 2009 Location: Virginia Posts: 295	Re: Parting: 72 cheyenne longhorn What shape is the paint divider on the back of cab? If in good shape what would cost be shipped to 22435? Thanks.............

09-24-2010, 09:14 AM	#9
Chris H 72 C30 Trailer Queen Join Date: Dec 1999 Location: SE MN, USA Posts: 794	Re: Parting: 72 cheyenne longhorn Hi Eric! 4.10 Eaton center section? I have a locker waiting, just need a clean 4.10 setup. __________________ Chris H 72 C30 133" 72 C30 157" flat-dump 69 C10 short fleet 71 ElCamino 2000 K2500 crewcab shortbed (sold, sorry old friend) 2005 GMC 2500HD shortcrew Duramax 2006 K1500 RCSB and a couple other projects/parts

09-24-2010, 09:45 AM	#10
too much stuff Roadtrip! Join Date: Feb 2003 Location: Grand Rapids MN Posts: 13,852	Re: Parting: 72 cheyenne longhorn Richard, PM sent. Twostiks, i have you down for the brake parts, gsxrdoug, No emblems, and no toolbox door. I will let you know on the sides if the other guy passes. OLEBEATER, i think it had a few dings. I will double check. Chris, PM sent. I will have the truck here tomorrow and will verify condition and shipping prices for everyone. Eric __________________ 67 gmc custom lwb dakota truck. Sold...And bought back 69 swb 4x4 project (in progress) 70 c-10 lwb texas truck 70 4x4/BB/bkts/posi/tach(retired) 70 swb (wifes) 70 jimmy camper 71 K-5 factory 2wd 71 cheyenne 4x4/tach/posi/ plow rig 71 Cheyenne20 BB, buckets, tach, tilt, 4 speed 72 jimmy CST wyoming rig 72 jimmy Colorado rig 72 lifted texas 4x4 3/4 ton burb 65 fury conv. 383/auto 65 chrysler 300 "L" 413 auto

09-24-2010, 09:46 AM	#11
gsxrdoug 1970 C10 six Join Date: Aug 2010 Location: Honolulu, Hawaii Posts: 186	Re: Parting: 72 cheyenne longhorn Thanks __________________ 1970 C10 L6 250 three speeder

09-24-2010, 09:48 AM	#12
gsxrdoug 1970 C10 six Join Date: Aug 2010 Location: Honolulu, Hawaii Posts: 186	Re: Parting: 72 cheyenne longhorn If the other guy bails I'm really only looking for the box in the side if that can be pulled. __________________ 1970 C10 L6 250 three speeder

09-24-2010, 04:47 PM	#13
My72BB Registered User Join Date: Oct 2007 Location: Fairfield, PA Posts: 503	Re: Parting: 72 cheyenne longhorn Dang...That was a really loaded up truck in its day! I hate rust! It looks like it has the factory aux fuel tank? If so whats left of switch/wiring/cover in bed and or tank? Thanks, Alan

09-25-2010, 02:02 PM	#14
too much stuff Roadtrip! Join Date: Feb 2003 Location: Grand Rapids MN Posts: 13,852	Re: Parting: 72 cheyenne longhorn Got her home and can pull some parts today and tomorrow. MY72BB, nothing good for what you need. Either rusted or missing parts. OLEBEATER, Plenty of dings. $15 plus ship. gsxrdoug, i will check out the tool box. Looked like it had a hole in back... __________________ 67 gmc custom lwb dakota truck. Sold...And bought back 69 swb 4x4 project (in progress) 70 c-10 lwb texas truck 70 4x4/BB/bkts/posi/tach(retired) 70 swb (wifes) 70 jimmy camper 71 K-5 factory 2wd 71 cheyenne 4x4/tach/posi/ plow rig 71 Cheyenne20 BB, buckets, tach, tilt, 4 speed 72 jimmy CST wyoming rig 72 jimmy Colorado rig 72 lifted texas 4x4 3/4 ton burb 65 fury conv. 383/auto 65 chrysler 300 "L" 413 auto

09-25-2010, 03:41 PM	#15
too much stuff Roadtrip! Join Date: Feb 2003 Location: Grand Rapids MN Posts: 13,852	Re: Parting: 72 cheyenne longhorn Almost ready for the crusher... Pics for twostiks, richard, and gsxrdoug. Attached Images __________________ 67 gmc custom lwb dakota truck. Sold...And bought back 69 swb 4x4 project (in progress) 70 c-10 lwb texas truck 70 4x4/BB/bkts/posi/tach(retired) 70 swb (wifes) 70 jimmy camper 71 K-5 factory 2wd 71 cheyenne 4x4/tach/posi/ plow rig 71 Cheyenne20 BB, buckets, tach, tilt, 4 speed 72 jimmy CST wyoming rig 72 jimmy Colorado rig 72 lifted texas 4x4 3/4 ton burb 65 fury conv. 383/auto 65 chrysler 300 "L" 413 auto



Register or Log In To remove these advertisements.

09-25-2010, 11:08 PM	#16
too much stuff Roadtrip! Join Date: Feb 2003 Location: Grand Rapids MN Posts: 13,852	Re: Parting: 72 cheyenne longhorn This gem is almost out of here! Speak up if you see anything... __________________ 67 gmc custom lwb dakota truck. Sold...And bought back 69 swb 4x4 project (in progress) 70 c-10 lwb texas truck 70 4x4/BB/bkts/posi/tach(retired) 70 swb (wifes) 70 jimmy camper 71 K-5 factory 2wd 71 cheyenne 4x4/tach/posi/ plow rig 71 Cheyenne20 BB, buckets, tach, tilt, 4 speed 72 jimmy CST wyoming rig 72 jimmy Colorado rig 72 lifted texas 4x4 3/4 ton burb 65 fury conv. 383/auto 65 chrysler 300 "L" 413 auto

09-26-2010, 02:56 AM	#17
72supermike Registered User Join Date: Nov 2009 Location: Harrison, Idaho Posts: 214	Re: Parting: 72 cheyenne longhorn how about the steering wheel? is it there? Is it black? if so, what condition?

09-26-2010, 10:20 AM	#19
lchall Registered User Join Date: Feb 2008 Location: St. Charles, MO Posts: 291	Re: Parting: 72 cheyenne longhorn If it gets down to the end and you still have the fenders/bedsides I would be interested in the 4 side marker areas. That is if you would want to cut them out and they are in good shape. I would like the side marker and 2-3 inches around. __________________ 1967 Chevy SWB 1972 Chevy SWB 1972 Chevy SWB K20 4x4 1991 Ford F-150 2013 Dodge Ram 1500 4x4

09-26-2010, 11:15 AM	#20
OLEBEATER Registered User Join Date: Mar 2009 Location: Virginia Posts: 295	Re: Parting: 72 cheyenne longhorn I'll pass on the cab trim, thanks anyway.

09-26-2010, 09:32 PM	#21
too much stuff Roadtrip! Join Date: Feb 2003 Location: Grand Rapids MN Posts: 13,852	Re: Parting: 72 cheyenne longhorn Pm's sent to those looking for parts. This truck is done and out of here tomorrow. No more parts from this one. I did pull a saddle headliner and visors in driver shape. $45 on the headliner, and $25 on the visors plus shipping. __________________ 67 gmc custom lwb dakota truck. Sold...And bought back 69 swb 4x4 project (in progress) 70 c-10 lwb texas truck 70 4x4/BB/bkts/posi/tach(retired) 70 swb (wifes) 70 jimmy camper 71 K-5 factory 2wd 71 cheyenne 4x4/tach/posi/ plow rig 71 Cheyenne20 BB, buckets, tach, tilt, 4 speed 72 jimmy CST wyoming rig 72 jimmy Colorado rig 72 lifted texas 4x4 3/4 ton burb 65 fury conv. 383/auto 65 chrysler 300 "L" 413 auto

Register or Log In To remove these advertisements.