CA Parting 77/86 SWB 2WD Project - The 1947 - Present Chevrolet & GMC Truck Message Board Network

KrazyRay · 09-30-2010, 04:29 PM

Just in is a project truck that the PO gave up on because his wife wanted it gone. It is a 86 frame with a 77 body. There is no bed, but a lot of loose parts.
It has a 2/4 drop and the chassis has been cleaned and painted.
Please respond in thread to avoid confusion. Thanks, Ray
Rolling frame and 2/4 chassis $350 local
Front clip with hood $150 local
77 tilt column with key $80 plus shipping
77 vent windows $40 pair plus shipping
New tan carpet $40 plus shipping
Misc loose pieces...cheap

KrazyRay · 09-30-2010, 04:35 PM

pics

xs-style · 09-30-2010, 07:13 PM

If you happen to want to sell the 2/4 components, let me know.

*Stitch* · 09-30-2010, 09:54 PM

I'd like the shackles or hangers or both in the rear...thanks Ray...

ECU PIRATE · 10-01-2010, 11:27 AM

Too bad that carpet is not saddle or camel...............I could use that. Can you give me a price on shipping to 20121? Thanks Ray

1LowToy · 10-02-2010, 10:52 PM

Krazy
Does that carpet reach to the back of the cab/for 2wd? If so I can come to you tomorrow (Sunday). PM me

KrazyRay · 10-02-2010, 11:46 PM

Quote:

Originally Posted by ECU PIRATE

Too bad that carpet is not saddle or camel...............I could use that. Can you give me a price on shipping to 20121? Thanks Ray

Its $22 for shipping to 20121.
Thanks, Ray

KrazyRay · 10-02-2010, 11:49 PM

Quote:

Originally Posted by 1LowToy

Krazy
Does that carpet reach to the back of the cab/for 2wd? If so I can come to you tomorrow (Sunday). PM me

ECU PIRATE is first up. If he passes then its yours. pm sent.
Thanks, Ray

ECU PIRATE · 10-04-2010, 01:15 PM

Quote:

Originally Posted by KrazyRay

ECU PIRATE is first up. If he passes then its yours. pm sent.
Thanks, Ray

Thanks Ray. I am going to pass on the carpet. If I had not changed by interior out, I would be all over this for the price. I guess I will be ponying up for some saddle carpet here in the next few months

Mike

SS Delux · 10-05-2010, 12:33 AM

Just wanted to thank you for the tank brackets, they are epoxy primed and look GREAT! wondering if it is drop springs or spindles and what you would want for them w/ dust shields ?

KrazyRay · 10-05-2010, 09:55 AM

Quote:

Originally Posted by SS Delux

Just wanted to thank you for the tank brackets, they are epoxy primed and look GREAT! wondering if it is drop springs or spindles and what you would want for them w/ dust shields ?

I'm going to try to sell the rolling chassis complete first.
Thanks, Ray

Silence86 · 10-07-2010, 10:23 AM

how is that gauge cluster sitting in the passenger seat?

KrazyRay · 10-07-2010, 10:37 AM

Quote:

Originally Posted by Silence86

how is that gauge cluster sitting in the passenger seat?

It looks to be in good condition, but I have not tested it. $31 shipped.
Thanks, Ray

Silence86 · 10-07-2010, 10:39 AM

would you ship just the plastic circuit piece on the back

KrazyRay · 10-08-2010, 12:12 AM

Quote:

Originally Posted by Silence86

would you ship just the plastic circuit piece on the back

Yes, $10 plus shipping. Can the circuit be rolled up to save on shipping?

*Stitch* · 10-08-2010, 07:20 AM

You should be able to roll it up. It's a flexible printed circuit. It's made to be flexible. You might be able to ship it flat in a padded envelope also
Posted via Mobile Device

BigRed76 · 10-12-2010, 12:32 AM

Are there any side mirrors, or seat belts?

KrazyRay · 10-12-2010, 09:48 AM

Quote:

Originally Posted by BigRed76

Are there any side mirrors, or seat belts?

There are tan belts. $35 shipped. Thanks, Ray

BigRed76 · 10-13-2010, 12:45 AM

Quote:

Originally Posted by KrazyRay

There are tan belts. $35 shipped. Thanks, Ray

I'll have to pass on the belts since i need black ones.

american revolution · 10-15-2010, 04:32 AM

Quote:

Originally Posted by KrazyRay

I'm going to try to sell the rolling chassis complete first.
Thanks, Ray

interested in drop spindles if you decide to take apart also

KrazyRay · 11-13-2010, 01:15 AM

Quote:

Originally Posted by xs-style

If you happen to want to sell the 2/4 components, let me know.

I'm going to sell the rear Belltech components separately since the chassis didn't sell. $115 shipped for all the rear lowering parts. pm sent
Stitch is next up.
Thanks, Ray

*Stitch* · 11-13-2010, 01:20 AM

I'm gonna have to pass on the suspension for now Ray...thanks for keeping me in mind...don't know whether I'm keeping the shortbed or not right now...

KrazyRay · 11-13-2010, 01:26 AM

Quote:

Originally Posted by american revolution

interested in drop spindles if you decide to take apart also

They do not look to be drop spindles...shorter springs? I'm going to try to sell the front end complete to the 60-70 drum brake crowd.
Thanks, Ray

sixshooter798 · 11-13-2010, 02:49 AM

How do the seat belts look?

Rogue_Sentinel · 11-13-2010, 04:22 AM

Quote:

Originally Posted by 1LowToy

Krazy
Does that carpet reach to the back of the cab/for 2wd? If so I can come to you tomorrow (Sunday). PM me

Quote:

Originally Posted by KrazyRay

Its $22 for shipping to 20121.
Thanks, Ray

is the carpet still for sale ? if so, shipping to 27030.

09-30-2010, 04:29 PM	#1
KrazyRay Registered User Join Date: Jun 2009 Location: Oroville, CA Posts: 4,827	Parting 77/86 SWB 2WD Project Just in is a project truck that the PO gave up on because his wife wanted it gone. It is a 86 frame with a 77 body. There is no bed, but a lot of loose parts. It has a 2/4 drop and the chassis has been cleaned and painted. Please respond in thread to avoid confusion. Thanks, Ray Rolling frame and 2/4 chassis $350 local Front clip with hood $150 local 77 tilt column with key $80 plus shipping 77 vent windows $40 pair plus shipping New tan carpet $40 plus shipping Misc loose pieces...cheap Attached Images

09-30-2010, 04:35 PM	#2
KrazyRay Registered User Join Date: Jun 2009 Location: Oroville, CA Posts: 4,827	Re: Parting 77/86 SWB 2WD Project pics Attached Images

09-30-2010, 07:13 PM	#3
xs-style Registered User Join Date: Mar 2008 Location: Lawndale, NC Posts: 658	Re: Parting 77/86 SWB 2WD Project If you happen to want to sell the 2/4 components, let me know. __________________ 1978 Scottsdale - celebrating 10 years of teaching me profanity 1990 Silverado - bought in Nov. 2016 and it's already catching up - Sold 1987 k5 blazer - sold... :\ seed money for the 81 1981 k20 4x4 - 5.3 swap in progress Events attended: Spring GOG 2011 Dale JR car show Summer 2012 Gathering at Tommys pickup parts

09-30-2010, 09:54 PM	#4
Stitch Account Suspended Join Date: Jul 2008 Location: Where I come from, it's cornbread and chicken... Posts: 3,122	Re: Parting 77/86 SWB 2WD Project I'd like the shackles or hangers or both in the rear...thanks Ray...

10-01-2010, 11:27 AM	#5
ECU PIRATE Registered User Join Date: Apr 2009 Location: Centreville, Virginia Posts: 846	Re: Parting 77/86 SWB 2WD Project Too bad that carpet is not saddle or camel...............I could use that. Can you give me a price on shipping to 20121? Thanks Ray __________________ The Fleet........ 68' Camaro - 1st car (restored & still have it) 09' VW Tiguan (Wife's Daily Driver) 14' VW Passat SE TSI (my personal) 14' Ford Edge Sport (Daily Work Vehicle) 73' SWB Stepside - 77K org. miles 74' LWB 454/TH400 - drive train transplant for my (Sold) 98' SWB C1500 W/T - shop truck (Sold) 90' GMC Sierra SLE short step - aka " Jezabelle " (Sold)

10-02-2010, 10:52 PM	#6
1LowToy Registered User Join Date: Nov 2009 Location: Sonora California Posts: 860	Re: Parting 77/86 SWB 2WD Project Krazy Does that carpet reach to the back of the cab/for 2wd? If so I can come to you tomorrow (Sunday). PM me

10-05-2010, 12:33 AM	#10
SS Delux Registered User Join Date: Jun 2010 Location: windsor Posts: 290	Re: Parting 77/86 SWB 2WD Project Just wanted to thank you for the tank brackets, they are epoxy primed and look GREAT! wondering if it is drop springs or spindles and what you would want for them w/ dust shields ?

10-07-2010, 10:23 AM	#12
Silence86 Registered User Join Date: Feb 2009 Location: N. Richland Hills Tx Posts: 229	Re: Parting 77/86 SWB 2WD Project how is that gauge cluster sitting in the passenger seat? __________________ 1986 gmc sierra....http://67-72chevytrucks.com/vboard/a...hp?albumid=622

10-07-2010, 10:39 AM	#14
Silence86 Registered User Join Date: Feb 2009 Location: N. Richland Hills Tx Posts: 229	Re: Parting 77/86 SWB 2WD Project would you ship just the plastic circuit piece on the back __________________ 1986 gmc sierra....http://67-72chevytrucks.com/vboard/a...hp?albumid=622

10-08-2010, 07:20 AM	#16
Stitch Account Suspended Join Date: Jul 2008 Location: Where I come from, it's cornbread and chicken... Posts: 3,122	Re: Parting 77/86 SWB 2WD Project You should be able to roll it up. It's a flexible printed circuit. It's made to be flexible. You might be able to ship it flat in a padded envelope also Posted via Mobile Device Last edited by Stitch; 10-08-2010 at 07:20 AM.

10-12-2010, 12:32 AM	#17
BigRed76 Registered User Join Date: Jan 2010 Location: Loveland, CO Posts: 1,921	Re: Parting 77/86 SWB 2WD Project Are there any side mirrors, or seat belts? __________________ Zach 1970 Chevrolet Custom Camper K20 1971 GMC Super K2500, 12V/NV4500 swap in progress 1971 Chevrolet Custom C10 1972 Chevrolet Custom Deluxe C20, 5.3/4L60E 1972 Oldsmobile Cutlass Supreme, 455/TH400, 3.73 posi 2004 GMC Sierra 2500HD, LB7/Allison, CCSB 2005 GMC Sierra 1500, 5.3/4L60E, CCSB

11-13-2010, 01:20 AM	#22
Stitch Account Suspended Join Date: Jul 2008 Location: Where I come from, it's cornbread and chicken... Posts: 3,122	Re: Parting 77/86 SWB 2WD Project I'm gonna have to pass on the suspension for now Ray...thanks for keeping me in mind...don't know whether I'm keeping the shortbed or not right now...

11-13-2010, 02:49 AM	#24
sixshooter798 Desert Rat Join Date: Jul 2010 Location: Mojave Desert Posts: 169	Re: Parting 77/86 SWB 2WD Project How do the seat belts look?



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.