Just another day hauling - The 1947 - Present Chevrolet & GMC Truck Message Board Network

RuralRoute C-30 · 10-09-2010, 04:45 PM

Well I think I finally got the right combination now. Spent a couple of evenings this week in the shop making my 2x12 sides on the flatbed 26" tall from the bed floor. Construction is an entirely different story. I can take building a simple box and...well, at least it works! Thank goodness for air tools, mini-sledge and a level. Getting those stake-pocket 2x4's straight and level was a pain!

I have yet to do a count on all the bolts,washers and nuts used in the two evenings spent on this project!

Will probably leave the new sides on for the winter then change it back to just 2x12 sides in the spring.

So today I did another wood run, this one being around 60 miles round trip, inside this October summer like day.

Now with the taller bed-sides it is 3 ricks of wood on the truck with 2 on the trailer instead of the other way around. By doing this and spreading the load on the trailer, instead of the majority weight sitting over that axle, it just rolled on down the road like a Cadillac packed for vacation and that single axle trailer was not "too over-weight". (one of these days I need to go over some scales when loaded like this just to satisfy my curiousity before DOT does

) Yet still hopeful to find a short tandem to replace this trailer sooner than later.

Seriously, for this truck being 25 years old, it worked like a new one. Chevy tough and it really is built 'like a rock'. I am impressed!

Yet my original goal was to be able to road run for 5 ricks of wood at a time to keep transportation costs down per unit when and where I could find a good deal on wood for our winter supply. Finally this truck/trailer set-up can do it without tearing up the trailer in the process.

For what its worth, here is the link where I was running with just the 2x12 sides. Definitely hauls better this way.http://67-72chevytrucks.com/vboard/s...d.php?t=422288

This truck is a tank.

Mark

Matt Man · 10-09-2010, 07:16 PM

man that truck is killer, old but still workin gotta love it!

That truck have a 454? manual or auto?

GMC87 · 10-09-2010, 07:32 PM

Awesome! just Awesome! I am not sure how much a rick is but I have mine loaded down a few times hauling wood

Looks like yours holds a hell of a lot more though with that big bed on the back, touche!!

Matt Man · 10-09-2010, 07:41 PM

3000lbs of wall caps when my truck was stock.http://67-72chevytrucks.com/vboard/a...1&d=1286667311

str8axle55 · 10-09-2010, 08:19 PM

Nice to see them working still. I have had mine weighed, when I do scrap runs. My record so far is 1.9 tons, would like to get it over 2 ton. This is in a stock 86 K30 SRW with a stake body.

RuralRoute C-30 · 10-09-2010, 08:42 PM

Quote:

Originally Posted by Matt Man

man that truck is killer, old but still workin gotta love it!

That truck have a 454? manual or auto?

Appreciate the compliment and really enjoy seeing the pictures of other working Chevy's. Love the show & go but nice to get a glimpse of those still doing what they were made for.

This cab & chassis was equipped with the 350 along with the SM465 4spd manual trans. Appears to be built to be a slow and steady worker which is exactly what it is. Could pull a house down with that low gear.

Guess I'm getting hooked on these square bodies now as I always take notice of the ones I do see.

Mark

hitcher · 10-10-2010, 11:49 PM

great pics everyone . love seeing those rigs working hard just like they were made to do. i must have hauled hundreds of loads of wood when i had my tree business . dont use my truck for my actual job not but still gets used to the max when ever its needed .

10-09-2010, 04:45 PM	#1
RuralRoute C-30 Registered User Join Date: Jan 2010 Location: East Central Illinois Posts: 511	Just another day hauling Well I think I finally got the right combination now. Spent a couple of evenings this week in the shop making my 2x12 sides on the flatbed 26" tall from the bed floor. Construction is an entirely different story. I can take building a simple box and...well, at least it works! Thank goodness for air tools, mini-sledge and a level. Getting those stake-pocket 2x4's straight and level was a pain! I have yet to do a count on all the bolts,washers and nuts used in the two evenings spent on this project! Will probably leave the new sides on for the winter then change it back to just 2x12 sides in the spring. So today I did another wood run, this one being around 60 miles round trip, inside this October summer like day. Now with the taller bed-sides it is 3 ricks of wood on the truck with 2 on the trailer instead of the other way around. By doing this and spreading the load on the trailer, instead of the majority weight sitting over that axle, it just rolled on down the road like a Cadillac packed for vacation and that single axle trailer was not "too over-weight". (one of these days I need to go over some scales when loaded like this just to satisfy my curiousity before DOT does) Yet still hopeful to find a short tandem to replace this trailer sooner than later. Seriously, for this truck being 25 years old, it worked like a new one. Chevy tough and it really is built 'like a rock'. I am impressed! Yet my original goal was to be able to road run for 5 ricks of wood at a time to keep transportation costs down per unit when and where I could find a good deal on wood for our winter supply. Finally this truck/trailer set-up can do it without tearing up the trailer in the process. For what its worth, here is the link where I was running with just the 2x12 sides. Definitely hauls better this way.http://67-72chevytrucks.com/vboard/s...d.php?t=422288 This truck is a tank. Mark __________________ 1985 Chevy C-30 Hydraulic Dump Bed 2001 Saturn SC2 (go to work car) 2010 PT Cruiser (wife's car) "Reality is just a hallucination brought on by lack of alcohol." Last edited by RuralRoute C-30; 10-11-2010 at 12:15 AM.

10-09-2010, 07:16 PM	#2
Matt Man Registered User Join Date: Oct 2009 Location: Buhl, Idaho Posts: 1,438	Re: Just another day hauling man that truck is killer, old but still workin gotta love it! That truck have a 454? manual or auto? __________________ 86 c30 crew cab dually 454/400 4/6 drop SOLD 1-8-11 1981 chevy K10 short Bed Scottsdale SOLD 10-26-2020 67 GMC Stepside Straight six/3 on the tree "The Peach" 2020 Silverado Double Cab LT Z71 5.3 8 speed Daily Driver K10 build http://67-72chevytrucks.com/vboard/s...d.php?t=671934 The Peach build http://67-72chevytrucks.com/vboard/s...d.php?t=733903 Last edited by Matt Man; 10-09-2010 at 07:18 PM.

10-09-2010, 07:32 PM	#3
GMC87 Registered User Join Date: Aug 2010 Location: N.Canton, Ohio Posts: 70	Re: Just another day hauling Awesome! just Awesome! I am not sure how much a rick is but I have mine loaded down a few times hauling wood Looks like yours holds a hell of a lot more though with that big bed on the back, touche!!

10-09-2010, 07:41 PM	#4
Matt Man Registered User Join Date: Oct 2009 Location: Buhl, Idaho Posts: 1,438	Re: Just another day hauling 3000lbs of wall caps when my truck was stock.http://67-72chevytrucks.com/vboard/a...1&d=1286667311 Attached Images __________________ 86 c30 crew cab dually 454/400 4/6 drop SOLD 1-8-11 1981 chevy K10 short Bed Scottsdale SOLD 10-26-2020 67 GMC Stepside Straight six/3 on the tree "The Peach" 2020 Silverado Double Cab LT Z71 5.3 8 speed Daily Driver K10 build http://67-72chevytrucks.com/vboard/s...d.php?t=671934 The Peach build http://67-72chevytrucks.com/vboard/s...d.php?t=733903

10-09-2010, 08:19 PM	#5
str8axle55 Registered User Join Date: May 2009 Location: Weymouth Ma Posts: 489	Re: Just another day hauling Nice to see them working still. I have had mine weighed, when I do scrap runs. My record so far is 1.9 tons, would like to get it over 2 ton. This is in a stock 86 K30 SRW with a stake body. __________________ 03 GMC Yukon XL 2500 Quadrasteer, wife`s DD 84 Chevy K30 CC SRW 55 Chevy 210 2dr post

10-10-2010, 11:49 PM	#7
hitcher Registered User Join Date: Jul 2010 Location: lawton ok Posts: 190	Re: Just another day hauling great pics everyone . love seeing those rigs working hard just like they were made to do. i must have hauled hundreds of loads of wood when i had my tree business . dont use my truck for my actual job not but still gets used to the max when ever its needed .



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.