What I did today for 38 bucks and found something interesting - The 1947 - Present Chevrolet & GMC Truck Message Board Network

Heavy Evy · 10-11-2010, 12:29 AM

I went to the junkyard today for no paticular reason but just to see what was lurking around. I wound up finding a 72 C20 that had been wrapped around a pole and man what a shame this thing was in great shape no rust at all and I got these great parts! Bench seat that had recently been recovered nice working door handle (mine broke last year

) and shifter indicator! The grand total was 38 bucks for all. YES!!! Name: good deal 1.jpg
Views: 1651
Size: 41.6 KB

Name: good deal 2.jpg
Views: 1661
Size: 37.9 KB

Once I got the parts home it was time to go to work. I pulled my rig into the garage and started wrenching. Heres a few pics. Before Name: old seat.jpg
Views: 1654
Size: 42.1 KB

Name: old seat.jpg
Views: 1654
Size: 42.1 KB

and after

Name: new seat.jpg
Views: 1655
Size: 43.2 KB

I usually hate sundays aside from football but It felt good to do something productive for once and my bears won today too so that helped alot haha.

Another truck caught my eye after I pulled the bench seat out of the 72. I found a 69 C20 that looked in too good of shape to be at a junkyard. I got closer and noticed the rockers were completely gone and the floorboards were rusted through. I checked the spif and it was an original 396 truck on another note I noticed these awsome door panels that have a bowtie at the top and the middle. Name: door panel.jpg
Views: 1651
Size: 39.1 KB

Name: door panel.jpg
Views: 1651
Size: 39.1 KB

I have never seen these before and tried to get them out but the covering shredding on the bottom of the driverside when I got the bolt out so I said screw it. Anybody seen or know about these panels?

Keepin' it epic, Evan

Jacfourteen · 10-11-2010, 01:00 AM

Good score! I am going to the local yard tomorrow, I'm getting a 6 lug posi rear with 3.73s, I'm sure that it will cost more than your $38 bill

.

**71blksuper4x4** · 10-11-2010, 04:21 AM

Yes, those are the 1969 CST door panels. In 70'-71' they got the woodgrain. Trevor

Heavy Evy · 10-12-2010, 01:50 PM

i did not know that they were factory cst door panels. i think they look sick! i like my woodgrain but might have to get a set of these. cheers!, evan
Posted via Mobile Device
Posted via Mobile Device

mcbassin · 10-12-2010, 04:10 PM

Looks like a great score to me!

**Dieselwrencher** · 10-12-2010, 04:17 PM

Very cool nice score! I never noticed the bow tie on the door panels before, I'll have to keep an eye out for those. Nice catch.

rblcori7 · 11-30-2010, 06:00 PM

hey man what junk yard are you going to to find these deals lol

Heavy Evy · 11-30-2010, 09:30 PM

believe it or not i got the stuff from pick n pull. crazy huh?
Posted via Mobile Device
Posted via Mobile Device

chevy88 · 11-30-2010, 09:45 PM

That sure is some cheap parts up here they usually want 1/2 price of new.

MacbreSkull · 11-30-2010, 10:15 PM

Quote:

Originally Posted by Heavy Evy

believe it or not i got the stuff from pick n pull. crazy huh?
Posted via Mobile Device
Posted via Mobile Device

Hey heavy did you see any 60-66 trucks at pick and pull LOL or even something i could pull the disc brakes off of?

Heavy Evy · 11-30-2010, 11:24 PM

Quote:

Originally Posted by MacbreSkull

Hey heavy did you see any 60-66 trucks at pick and pull LOL or even something i could pull the disc brakes off of?

actually i saw a 62 63 and 64 pick ups there. the 63 was a gmc and it was nice just wrecked in the front. go check em out but warning that place is a hit or miss no middle ground.
Posted via Mobile Device

*low&slow* · 11-30-2010, 11:52 PM

Quote:

Originally Posted by Heavy Evy

I went to the junkyard today for no paticular reason but just to see what was lurking around. I wound up finding a 72 C20 that had been wrapped around a pole and man what a shame this thing was in great shape no rust at all and I got these great parts! Bench seat that had recently been recovered nice working door handle (mine broke last year

) and shifter indicator! The grand total was 38 bucks for all. YES!!! Attachment 642424

Attachment 642425

Once I got the parts home it was time to go to work. I pulled my rig into the garage and started wrenching. Heres a few pics. Before Attachment 642426 and after Attachment 642427

I usually hate sundays aside from football but It felt good to do something productive for once and my bears won today too so that helped alot haha.

Another truck caught my eye after I pulled the bench seat out of the 72. I found a 69 C20 that looked in too good of shape to be at a junkyard. I got closer and noticed the rockers were completely gone and the floorboards were rusted through. I checked the spif and it was an original 396 truck on another note I noticed these awsome door panels that have a bowtie at the top and the middle. Attachment 642432 I have never seen these before and tried to get them out but the covering shredding on the bottom of the driverside when I got the bolt out so I said screw it. Anybody seen or know about these panels?

Keepin' it epic, Evan

Those door panels are very popular where I live. There on all my trucks and came that way. I also have a ton of them in good condition laying around. I thought that's how they came.

MacbreSkull · 12-01-2010, 01:37 AM

Quote:

Originally Posted by Heavy Evy

actually i saw a 62 63 and 64 pick ups there. the 63 was a gmc and it was nice just wrecked in the front. go check em out but warning that place is a hit or miss no middle ground.
Posted via Mobile Device

The pick and pull on Redwood and just south of I-80?

Heavy Evy · 12-01-2010, 11:31 AM

Quote:

Originally Posted by low&slow

Those door panels are very popular where I live. There on all my trucks and came that way. I also have a ton of them in good condition laying around. I thought that's how they came.

Are you hinting that you want to get rid of a set, if so i might know a fella who would be interested

Quote:

Originally Posted by MacbreSkull

The pick and pull on Redwood and just south of I-80?

Its the pick n pull off of I15 and 3300 south in between 500 and 700 west

marcsRX · 12-01-2010, 11:44 AM

GO BEARS!!!!!!

smn69 · 12-01-2010, 11:53 AM

Quote:

Originally Posted by MacbreSkull

Hey heavy did you see any 60-66 trucks at pick and pull LOL or even something i could pull the disc brakes off of?

There is a pick and pull on Geneva road and 400 south in Orem that has a couple 60 to 66 trucks and one 69 or 70. They have some vans and mid 70's suburbans too.

Heavy Evy · 12-01-2010, 04:45 PM

Quote:

Originally Posted by marcsRX

GO BEARS!!!!!!

glad to see a fellow bear and chevy man on here! bear down and what did you think of the game on sunday?
Posted via Mobile Device

**1970greenc10** · 12-01-2010, 04:46 PM

any other dark blue inerior parts in that truck.
Thanks,Marty

**70C10Toejam** · 12-01-2010, 10:43 PM

Nice score! That's why I like the pick-n-pulls, ya can just browse around and see what ya like. And usually dirt cheap.

Longhorn Man · 12-02-2010, 06:01 PM

those door panels are early 69. In late 69 they had no markings there.
The GMC ones said GMC in the top center where toe bow tie is in that photo

**Dieselwrencher** · 12-02-2010, 06:18 PM

Thanks for that info Longhorn Man. I was wondering why all the ones I find have no darn bow tie.

10-11-2010, 12:29 AM	#1
Heavy Evy born to lose Join Date: Sep 2008 Location: Salt Lake City, Utah Posts: 842	What I did today for 38 bucks and found something interesting I went to the junkyard today for no paticular reason but just to see what was lurking around. I wound up finding a 72 C20 that had been wrapped around a pole and man what a shame this thing was in great shape no rust at all and I got these great parts! Bench seat that had recently been recovered nice working door handle (mine broke last year) and shifter indicator! The grand total was 38 bucks for all. YES!!! Once I got the parts home it was time to go to work. I pulled my rig into the garage and started wrenching. Heres a few pics. Before and after I usually hate sundays aside from football but It felt good to do something productive for once and my bears won today too so that helped alot haha. Another truck caught my eye after I pulled the bench seat out of the 72. I found a 69 C20 that looked in too good of shape to be at a junkyard. I got closer and noticed the rockers were completely gone and the floorboards were rusted through. I checked the spif and it was an original 396 truck on another note I noticed these awsome door panels that have a bowtie at the top and the middle. I have never seen these before and tried to get them out but the covering shredding on the bottom of the driverside when I got the bolt out so I said screw it. Anybody seen or know about these panels? Keepin' it epic, Evan __________________ _____________________ '67 Chevy Belair Wagon 283 Powerglide '68 Chevy II Nova 2 door 350 TH400 Sold!! '71 Chevy C20 350 TH350 '71 Chevy C10 Burb 350 TH350 stolen totalled gone.... Burb Build http://67-72chevytrucks.com/vboard/s...d.php?t=475155 Nova Build http://67-72chevytrucks.com/vboard/s...d.php?t=498979 Wagon Build http://67-72chevytrucks.com/vboard/s...d.php?t=543052 Not giving a truck.

10-11-2010, 01:00 AM	#2
Jacfourteen Big Red - Now its a SWB! Join Date: Jun 2009 Location: Oroville, Ca Posts: 1,624	Re: What I did today for 38 bucks and found something interesting Good score! I am going to the local yard tomorrow, I'm getting a 6 lug posi rear with 3.73s, I'm sure that it will cost more than your $38 bill . __________________ 68 3/4 ton (Project)-350 Small Block, .030 over, 10:1 comp, 3998993 heads, C3BX edelbrock intake, comp cams XE268, Holley 670 SA, long tube headers, dual flow 40's, E-fan, Alum rad, currently under the knife getting shortened and bagged build thread 41 3/4 ton (wife's)-flatbed, fully restored to original 01 Tahoe LT 4WD (my daily driver)-Magnaflow Muffler, Rollin on 22's 02 Ford Mustang Convertable (Wife's Car)-Flowmaster 50, Clear corners, Intake, sittin on 18's

10-11-2010, 04:21 AM	#3
71blksuper4x4 SWB 4x4 Collector Join Date: Jun 2001 Location: Osage City, KS Posts: 5,151	Re: What I did today for 38 bucks and found something interesting Yes, those are the 1969 CST door panels. In 70'-71' they got the woodgrain. Trevor __________________ TREVOR 1970 CST swb 4x4 (speedwarning,cruise,tilt,tach,8track, original red shoulder belts,tow hooks) 1972 Jimmy (soon to be Hickey cloned) 1971 Cheyenne Super 4x4 swb (tilt,tach,buckets, original blue shoulder belts,am/fm,cruise,tow hooks, dealer 8 track) 1972 Cheyenne Super K20 4x4 Custom Camper (tilt, tach, am/fm, tow hooks, bed toolbox, aux gas tank 1972 Cheyenne Super Crew Cab K30 4x4 Duramax, Allison, np205, buckets, tow hooks (CURRENT PROJECT) http://67-72chevytrucks.com/vboard/s...d.php?t=624819 1989 V3500 Crew Cab (454tbi, NV4500, np205) 1970 Chevelle SS (LS5 454,th400,8track,buckets,tach) :2004 Jeep Wrangler Rubicon (daily driver) WTB: 1968-70 Cruise Control Lever

10-12-2010, 01:50 PM	#4
Heavy Evy born to lose Join Date: Sep 2008 Location: Salt Lake City, Utah Posts: 842	Re: What I did today for 38 bucks and found something interesting i did not know that they were factory cst door panels. i think they look sick! i like my woodgrain but might have to get a set of these. cheers!, evan Posted via Mobile Device Posted via Mobile Device __________________ _____________________ '67 Chevy Belair Wagon 283 Powerglide '68 Chevy II Nova 2 door 350 TH400 Sold!! '71 Chevy C20 350 TH350 '71 Chevy C10 Burb 350 TH350 stolen totalled gone.... Burb Build http://67-72chevytrucks.com/vboard/s...d.php?t=475155 Nova Build http://67-72chevytrucks.com/vboard/s...d.php?t=498979 Wagon Build http://67-72chevytrucks.com/vboard/s...d.php?t=543052 Not giving a truck.

10-12-2010, 04:10 PM	#5
mcbassin Still Learning Join Date: Jul 2009 Location: Central Oklahoma Posts: 10,108	Re: What I did today for 38 bucks and found something interesting Looks like a great score to me! __________________ Mike "69 Short Wide" My Project 86 Silverado Landen's Project Instagram: @mcbassin My Website C/10 Club Oklahoma Facebook Group

10-12-2010, 04:17 PM	#6
Dieselwrencher 6>8 Plugless........ Join Date: Sep 2007 Location: Prairie City, Ia Posts: 17,140	Re: What I did today for 38 bucks and found something interesting Very cool nice score! I never noticed the bow tie on the door panels before, I'll have to keep an eye out for those. Nice catch. __________________ Ryan 1972 Chevy Longhorn K30 Cheyenne Super, 359 Inline 6 cylinder, Auto Trans, Tilt, Diesel Tach/Vach, Buckets, Rare Rear 4-link and air ride option Build Thread 1972 GMC Sierra Grande Longhorn 4x4 1972 Chevy Cheyenne Super K20 Long Step side tilt, tach, tow hooks, AC, 350 4 speed 1972 C10 Suburban Custom Deluxe 1969 Chevy milk truck 1971 Camaro RS 5.3 BTR STG3 Cam Super T10 1940 Ford 354 Hemi 46RH Ford 9" on air ride huge project *Tired of spark plugs? Check this out.*

11-30-2010, 06:00 PM	#7
rblcori7 Registered User Join Date: Jun 2010 Location: Tyndall AFB FL Posts: 214	Re: What I did today for 38 bucks and found something interesting hey man what junk yard are you going to to find these deals lol __________________ 84 Short bed 350: Hooker headers, flow master 40 series, edelbrock Intake manifold, Holly street avenger carb, 4 inch skyjacker suspension lift, 33x12.5 Toyo Open Country Mud Terrains, 3.73 gears 2011 Silverado LTZ

11-30-2010, 09:30 PM	#8
Heavy Evy born to lose Join Date: Sep 2008 Location: Salt Lake City, Utah Posts: 842	Re: What I did today for 38 bucks and found something interesting believe it or not i got the stuff from pick n pull. crazy huh? Posted via Mobile Device Posted via Mobile Device __________________ _____________________ '67 Chevy Belair Wagon 283 Powerglide '68 Chevy II Nova 2 door 350 TH400 Sold!! '71 Chevy C20 350 TH350 '71 Chevy C10 Burb 350 TH350 stolen totalled gone.... Burb Build http://67-72chevytrucks.com/vboard/s...d.php?t=475155 Nova Build http://67-72chevytrucks.com/vboard/s...d.php?t=498979 Wagon Build http://67-72chevytrucks.com/vboard/s...d.php?t=543052 Not giving a truck.

11-30-2010, 09:45 PM	#9
chevy88 Registered User Join Date: May 2007 Location: Southern, Saskatchewan Posts: 640	Re: What I did today for 38 bucks and found something interesting That sure is some cheap parts up here they usually want 1/2 price of new. __________________ Kerry My build thread. http://67-72chevytrucks.com/vboard/s....php?p=3657823 1971 Chev SWB with 68 nose, 6.2 diesel th350, and 3.73 rear gears 1988 Chev Extendacab 2010 Honda VT1300CS Sabre 2005 Buick Rendezvous wife's ride

12-01-2010, 11:44 AM	#15
marcsRX 68 C10 SWB Join Date: Nov 2009 Location: Chicago Posts: 216	Re: What I did today for 38 bucks and found something interesting GO BEARS!!!!!! __________________ "How much physical pain do you go through on a daily basis that you can directly attribute to your lack of intelligence?" -R0bman

12-01-2010, 04:46 PM	#18
1970greenc10 Senior Member Join Date: Oct 2008 Location: Forestville, NY Posts: 225	Re: What I did today for 38 bucks and found something interesting any other dark blue inerior parts in that truck. Thanks,Marty __________________ My Chevys 79 caprice classic 70 c/10 69 k/10 03 silverado

12-01-2010, 10:43 PM	#19
70C10Toejam Hellasick Join Date: Jul 2006 Location: Death Moans, IA Posts: 876	Re: What I did today for 38 bucks and found something interesting Nice score! That's why I like the pick-n-pulls, ya can just browse around and see what ya like. And usually dirt cheap. __________________ I keep two MAGNUMS in my desk. One's a gun, and I keep it loaded. The other's a bottle and it keeps ME loaded. I'm Tracer Bullet. (Calvin and Hobbes) This life was a test. It was only a test. If this had been an actual life, you would have received instructions on where to go and what to do. RED meat is not bad for you...FUZZY BLUE/GREEN MEAT is bad for you!!!!!!!!!!!!! BUILT FORD TOUGH WITH CHEVY STUFF--sticker at Goodguys

12-02-2010, 06:01 PM	#20
Longhorn Man its all about the +6 inches Join Date: Jan 2001 Location: Hilliard Ohio Posts: 2,693	Re: What I did today for 38 bucks and found something interesting those door panels are early 69. In late 69 they had no markings there. The GMC ones said GMC in the top center where toe bow tie is in that photo

12-02-2010, 06:18 PM	#21
Dieselwrencher 6>8 Plugless........ Join Date: Sep 2007 Location: Prairie City, Ia Posts: 17,140	Re: What I did today for 38 bucks and found something interesting Thanks for that info Longhorn Man. I was wondering why all the ones I find have no darn bow tie. __________________ Ryan 1972 Chevy Longhorn K30 Cheyenne Super, 359 Inline 6 cylinder, Auto Trans, Tilt, Diesel Tach/Vach, Buckets, Rare Rear 4-link and air ride option Build Thread 1972 GMC Sierra Grande Longhorn 4x4 1972 Chevy Cheyenne Super K20 Long Step side tilt, tach, tow hooks, AC, 350 4 speed 1972 C10 Suburban Custom Deluxe 1969 Chevy milk truck 1971 Camaro RS 5.3 BTR STG3 Cam Super T10 1940 Ford 354 Hemi 46RH Ford 9" on air ride huge project *Tired of spark plugs? Check this out.*



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.