CA BLF Uniball arms - The 1947 - Present Chevrolet & GMC Truck Message Board Network

edflores · 10-19-2010, 10:08 PM

I have some Uni-ball arms from BLF. They did not come with upper cross-shafts or misalignment spacers for the uppers. The upper are bare, lowers are rattle canned silver. Never installed. Comes with bushings and hardware, and new lower balljoints for 73-87 spindles. Can be used on any 63-91 c10-c30 with a balljoint change according to BLF. Lowers do not have a provision for shocks. Supposedly these will lay a 22 WITHOUT drop spindles. They have a huge drop built into the lower arm. Asking 425 for the uppers, 875 for the upper and Lowers. Will not sell the lowers alone, unless someone grabs the uppers first. I'll snap a cell phone pics when I can.

edflores · 11-09-2010, 03:17 PM

Bump. 375 for the uppers, 775 for the uppers and lowers!!!!

10-19-2010, 10:08 PM	#1
edflores Registered User Join Date: Jul 2005 Location: Riverside CA Posts: 860	BLF Uniball arms I have some Uni-ball arms from BLF. They did not come with upper cross-shafts or misalignment spacers for the uppers. The upper are bare, lowers are rattle canned silver. Never installed. Comes with bushings and hardware, and new lower balljoints for 73-87 spindles. Can be used on any 63-91 c10-c30 with a balljoint change according to BLF. Lowers do not have a provision for shocks. Supposedly these will lay a 22 WITHOUT drop spindles. They have a huge drop built into the lower arm. Asking 425 for the uppers, 875 for the upper and Lowers. Will not sell the lowers alone, unless someone grabs the uppers first. I'll snap a cell phone pics when I can. Last edited by edflores; 10-20-2010 at 03:35 AM.

11-09-2010, 03:17 PM	#2
edflores Registered User Join Date: Jul 2005 Location: Riverside CA Posts: 860	Re: BLF Uniball arms Bump. 375 for the uppers, 775 for the uppers and lowers!!!!



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.