Glove box sheet options? - The 1947 - Present Chevrolet & GMC Truck Message Board Network

Steven Sellers · 03-02-2003, 11:02 AM

Hi all, my sheet in my glove box is unreadable. Is there somewhere I can go to find out what options it came with. This is a pretty basic truck but I was curious.

TIA
Steve

**Canadian694x4** · 03-02-2003, 12:53 PM

I have the same problem. I asked the same question and I was told to use the search function on the message boards...I'd try that but I didn't find anything that I hadn't already seen. I can make out one option # but I still haven't found a chart that can actually tell me what it is.

Purs · 03-02-2003, 01:08 PM

maybe this will help

Purs · 03-02-2003, 01:09 PM

2

Purs · 03-02-2003, 01:09 PM

3

Purs · 03-02-2003, 01:10 PM

last

No3Fan4Ever · 03-02-2003, 01:27 PM

Steve,
You might get lucky and find another build sheet for your truck;
You can try under the floor mat material if it is the basic rubber floor; or maybe under the seat in the webbing construction; or maybe behind the gas tank;
All of these locations have been mentioned in earlier posts on this subject;
Keep in mind that piece of paper, if it is actually there, has been there for over thirty years and probably is not in much better shape than the paper on the glove box door.............

Steven Sellers · 03-02-2003, 02:21 PM

Ok, thanks for the options sheet and the advice on where to look. I realize that all the paper is probally in the same shape just looking for ideas. I can read some of it but not much. I will look in the mentioned places as I tear into her. The floormat is pretty much dry rotted so I doubt I will find one there.

Thanks all

jose · 03-02-2003, 03:16 PM

Does anybody sell the option sheets with whatever options you want on them ?

Purs · 03-02-2003, 03:31 PM

call Gary at CSM 915-691-1944 cs-m.com
Tell him Brit sent you. He can probably help you.

OhioDan · 03-03-2003, 06:15 AM

Check out my web site listed below. I've got the option sheets for our trucks listed there. Also some paint codes.

03-02-2003, 11:02 AM	#1
Steven Sellers Registered User Join Date: Jan 2002 Location: North Carolina Posts: 692	Glove box sheet options? Hi all, my sheet in my glove box is unreadable. Is there somewhere I can go to find out what options it came with. This is a pretty basic truck but I was curious. TIA Steve __________________ 2008 Buick Enclave(wifes new non wrecked) 1996 Jeep Cherokee 2002 2500HD 6.0L (traded) 1998 Jeep Grand Cherokee(wifes/wrecked) 1977 DJ5 postal jeep(mmm lots of fun) 1988 Toyota 2wd p/u(DD, blewup 199,000) 1991 Toyota 2ed p/u (sry just cant break these things) 1997 XR70 Honda 1991 Z50(FOR SALE) 1972 Z50 Honda 1970 SWB 350/knucklebuster "The adventure begins and I am confident that there will be no end".

03-02-2003, 12:53 PM	#2
Canadian694x4 Born To Lose Club Join Date: Feb 2003 Location: Calgary, Alberta/Oxenden, Ontario, Great White North Posts: 13,307	I have the same problem. I asked the same question and I was told to use the search function on the message boards...I'd try that but I didn't find anything that I hadn't already seen. I can make out one option # but I still haven't found a chart that can actually tell me what it is. __________________ Brian Smith - "Born To Lose" 1969 Chevrolet K10 LWB Fleetside - Proud Owner For 22 Yrs - 1 of 208 Built & Sold In Canada!- 283 V8/350TH/NP208, 2" All Spring Lift, 32" Good Year MT/R's. 1972 GMC K2500 Custom LWB Fleetside - Proud Owner For 3 Yrs - 1 of 571 Built & Sold In Canada! - 350 V8/SM465/NP205, 4” Rough Country Lift, 33” Interco TSL Thornbirds 2007.5 GMC Sierra SLE 2500HD 4x4 - Proud Owner For 17 Yrs- 6.6L V8 Duramax Diesel/Allison 1000, 2" Lift, 33" Mickey Thompson MTZ's. 2008 Yamaha Raptor 700r - Proud Owner For 15 Yrs - ITP Mud Lites. 2015 John Deere 1025R - Proud Owner For 8 Yrs - 24HP Diesel/H120/54D/260B/SB1154.

03-02-2003, 01:08 PM	#3
Purs Got Big Block? Join Date: Apr 2000 Location: West Texas Posts: 1,510	maybe this will help Attached Images __________________ "Experience is what you get when you didn't get what you wanted."

03-02-2003, 01:09 PM	#4
Purs Got Big Block? Join Date: Apr 2000 Location: West Texas Posts: 1,510	2 Attached Images __________________ "Experience is what you get when you didn't get what you wanted."

03-02-2003, 01:09 PM	#5
Purs Got Big Block? Join Date: Apr 2000 Location: West Texas Posts: 1,510	3 Attached Images __________________ "Experience is what you get when you didn't get what you wanted."

03-02-2003, 01:10 PM	#6
Purs Got Big Block? Join Date: Apr 2000 Location: West Texas Posts: 1,510	last Attached Images __________________ "Experience is what you get when you didn't get what you wanted."

03-02-2003, 01:27 PM	#7
No3Fan4Ever Running on empty Join Date: Aug 2002 Location: Roanoke, Virginia Posts: 1,033	Steve, You might get lucky and find another build sheet for your truck; You can try under the floor mat material if it is the basic rubber floor; or maybe under the seat in the webbing construction; or maybe behind the gas tank; All of these locations have been mentioned in earlier posts on this subject; Keep in mind that piece of paper, if it is actually there, has been there for over thirty years and probably is not in much better shape than the paper on the glove box door............. __________________ _____________________________________________ Tim We have two rules here at the Rock. Rule #1: No writing on the walls. Rule#2: Obey all rules 70 GMC Sierra Grande "Custom Camper" Longhorn 402 Big Block TH400 PS PB factory AC Posi; 94 Bronco XLT 302, auto;worn out daily driver

03-02-2003, 02:21 PM	#8
Steven Sellers Registered User Join Date: Jan 2002 Location: North Carolina Posts: 692	Ok, thanks for the options sheet and the advice on where to look. I realize that all the paper is probally in the same shape just looking for ideas. I can read some of it but not much. I will look in the mentioned places as I tear into her. The floormat is pretty much dry rotted so I doubt I will find one there. Thanks all __________________ 2008 Buick Enclave(wifes new non wrecked) 1996 Jeep Cherokee 2002 2500HD 6.0L (traded) 1998 Jeep Grand Cherokee(wifes/wrecked) 1977 DJ5 postal jeep(mmm lots of fun) 1988 Toyota 2wd p/u(DD, blewup 199,000) 1991 Toyota 2ed p/u (sry just cant break these things) 1997 XR70 Honda 1991 Z50(FOR SALE) 1972 Z50 Honda 1970 SWB 350/knucklebuster "The adventure begins and I am confident that there will be no end".

03-02-2003, 03:16 PM	#9
jose Registered User Join Date: Feb 2001 Location: Salem , Oregon 97301 Posts: 1,796	options Does anybody sell the option sheets with whatever options you want on them ?

03-02-2003, 03:31 PM	#10
Purs Got Big Block? Join Date: Apr 2000 Location: West Texas Posts: 1,510	call Gary at CSM 915-691-1944 cs-m.com Tell him Brit sent you. He can probably help you. __________________ "Experience is what you get when you didn't get what you wanted."

03-03-2003, 06:15 AM	#11
OhioDan Registered User Join Date: Apr 2002 Location: New Carlisle, Ohio,USA Posts: 1,404	Check out my web site listed below. I've got the option sheets for our trucks listed there. Also some paint codes. __________________ LIFE AIN'T EASY WHEN YER FAT AND GREASY! GMC= Got More Class! 1970 GMC LWB, Fleetside, 350/4spd, Flowmaster "40's", 2002 GMC 16" Rallies, cowl hood,and added a bunch of options that weren't there when I started.



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.