mono leaf drop springs - The 1947 - Present Chevrolet & GMC Truck Message Board Network

64GMCHorsepower · 11-04-2010, 12:55 PM

I have a 64 gmc, with rear leafs...

who has used the mono leaf drop springs, and are you happy with them?

I have taken a few leafs out of my setup to lower it, but it likes to bounce all over the place now....so looking to do something different...

cdowns · 11-04-2010, 01:54 PM

i used monoleaf drop springs on all 4corners on a 60Ford f100 short stepper that i built and was very happy with the drop as well as the ride quality not at all soft and spongy not as stiff as a true hardcore worktruck but still handeled a heavy load good. plus the front was good with the 460ci motor

11-04-2010, 12:55 PM	#1
64GMCHorsepower Justified! Join Date: Apr 2007 Location: Valencia, Ca Posts: 1,366	mono leaf drop springs I have a 64 gmc, with rear leafs... who has used the mono leaf drop springs, and are you happy with them? I have taken a few leafs out of my setup to lower it, but it likes to bounce all over the place now....so looking to do something different... __________________ Chad 1964 GMC Fleetside Shortbed....350/700R4 tranny

11-04-2010, 01:54 PM	#2
cdowns Senior Member Join Date: Jan 2003 Location: daytonabeach Posts: 22,956	Re: mono leaf drop springs i used monoleaf drop springs on all 4corners on a 60Ford f100 short stepper that i built and was very happy with the drop as well as the ride quality not at all soft and spongy not as stiff as a true hardcore worktruck but still handeled a heavy load good. plus the front was good with the 460ci motor __________________ 71c-10 350/2004r/4:11 lowered3/4 longbed/dead by hurricane MEANING OF DEATH::::: SOMEBODY ELSE GETS YOUR STUFF DONT BELIEVE EVERYTHING YOU THINK TAKE MY ADVISE;I DON'T USE IT ANYWAY



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.