All yours for 1 low price - The 1947 - Present Chevrolet & GMC Truck Message Board Network

sjarrett71 · 11-07-2010, 06:13 PM

Here's a look at a local truck for only $5800.00. Seems a "little" steep to me but give me your thoughts.

http://shopping.rollanet.org/categor...VY-PICKUP.html

**John Fabris** · 11-07-2010, 06:27 PM

Not really enough details to get a good idea. but it appears to be original, and so would need lots of work to be dependable daily driver. I do agree a bit steep based on first impression.

I did notice it has the 16.5 by 9.75 wide rear rims though. (trying to put together a matching set of those.

)

**El Jay** · 11-07-2010, 06:36 PM

Seems to be a little steep going by what the pictures are showing.

BOOFIRE · 11-07-2010, 07:51 PM

He may want $5800 but if he really wants to get rid of it he wont get that much. I am just hoping when i finish mine i can get $6000.00 for it

Jacfourteen · 11-07-2010, 08:14 PM

I agree that we need better pictures/details, but I say he might sell it for one half that price.

sjarrett71 · 11-07-2010, 08:32 PM

I thought it was a little steep too but I don't know what he's basing his price off of. I might call him up and get more pics.

72BlckButy · 11-07-2010, 08:35 PM

Seems steep... but I'm not sure if there's any rust, rebuilt motor, etc.

**special-K** · 11-08-2010, 08:29 AM

It's a 1/2t with 8 x 15 wheels on the rear.Id's say it's a $1,500 truck at best.Looks like the rockers and wheel arches on the bed are rusted out.The wheel arch rust leads me to believe there's much more,like cab supports,outer floor,bed floor or inner walls,and on like that.

11-07-2010, 06:13 PM	#1
sjarrett71 Registered User Join Date: Dec 2006 Location: Rolla, MO Posts: 2,463	All yours for 1 low price Here's a look at a local truck for only $5800.00. Seems a "little" steep to me but give me your thoughts. http://shopping.rollanet.org/categor...VY-PICKUP.html __________________ -Scott-

11-07-2010, 06:27 PM	#2
John Fabris TOTY 2006 Join Date: Dec 1999 Location: Magalia CA USA Posts: 2,270	Re: All yours for 1 low price Not really enough details to get a good idea. but it appears to be original, and so would need lots of work to be dependable daily driver. I do agree a bit steep based on first impression. I did notice it has the 16.5 by 9.75 wide rear rims though. (trying to put together a matching set of those. ) __________________ John Fabris 67 C10 SWB Last edited by John Fabris; 11-07-2010 at 06:27 PM.

11-07-2010, 06:36 PM	#3
El Jay Gone to greener pastures Join Date: May 2007 Location: Gateway to the Delta Posts: 7,354	Re: All yours for 1 low price Seems to be a little steep going by what the pictures are showing. __________________ '69 Chevy 1/2 T LWB Stepper: Daily Beater '72 GMC 3/4 T Fleet: Another Daily Beater '72 Plymouth Gran Coupe: ? "Ah women. They make the highs higher and the lows more frequent." Friedrich Nietzsche "Never kick a fresh turd on a hot day." Harry S. Truman GUN CONTROL: Never having to say, "I missed you." Always fire two warning shots into your attacker's chest area before putting a bullet between his eyes. Paraphrased from Louis Awerbuck

11-07-2010, 07:51 PM	#4
BOOFIRE Registered User Join Date: Oct 2010 Location: Madison Wisconsin Posts: 3	Re: All yours for 1 low price He may want $5800 but if he really wants to get rid of it he wont get that much. I am just hoping when i finish mine i can get $6000.00 for it

11-07-2010, 08:14 PM	#5
Jacfourteen Big Red - Now its a SWB! Join Date: Jun 2009 Location: Oroville, Ca Posts: 1,624	Re: All yours for 1 low price I agree that we need better pictures/details, but I say he might sell it for one half that price. __________________ 68 3/4 ton (Project)-350 Small Block, .030 over, 10:1 comp, 3998993 heads, C3BX edelbrock intake, comp cams XE268, Holley 670 SA, long tube headers, dual flow 40's, E-fan, Alum rad, currently under the knife getting shortened and bagged build thread 41 3/4 ton (wife's)-flatbed, fully restored to original 01 Tahoe LT 4WD (my daily driver)-Magnaflow Muffler, Rollin on 22's 02 Ford Mustang Convertable (Wife's Car)-Flowmaster 50, Clear corners, Intake, sittin on 18's

11-07-2010, 08:32 PM	#6
sjarrett71 Registered User Join Date: Dec 2006 Location: Rolla, MO Posts: 2,463	Re: All yours for 1 low price I thought it was a little steep too but I don't know what he's basing his price off of. I might call him up and get more pics. __________________ -Scott-

11-07-2010, 08:35 PM	#7
72BlckButy Tot Roddin' Join Date: Apr 2005 Location: Mid-MO Posts: 24,461	Re: All yours for 1 low price Seems steep... but I'm not sure if there's any rust, rebuilt motor, etc. __________________ -Nate 1969 CST SWB - Project Blank Slate (4.5/6" ECE Static Drop, 6-lug disc brake upgrade (manual), Billet Specialties Vintec 20x8.5 255/40 (F) 20x10 295/40 (R), 250 I-6) 1960 AMF Skylark - Tot Roddin' (Lowered with custom frame; soon to include custom push bar and interior) 2008 Silverado CrewCab 1LT (5.3L, 3:73, 4x4, LT1, Z-71, Towing Package)

11-08-2010, 08:29 AM	#8
special-K Special Order Join Date: Nov 2004 Location: Mt Airy, MD Posts: 85,852	Re: All yours for 1 low price It's a 1/2t with 8 x 15 wheels on the rear.Id's say it's a $1,500 truck at best.Looks like the rockers and wheel arches on the bed are rusted out.The wheel arch rust leads me to believe there's much more,like cab supports,outer floor,bed floor or inner walls,and on like that. __________________ "BUILDING A BETTER WAY TO SERVE THE USA"......67/72......"The New Breed" GMC '67 C1500 Wideside Super Custom SWB: 327/M22/3.42 posi.........."The '67" (project) GMC '72 K2500 Wideside Sierra Custom Camper: 350/TH350/4.10 Power-Lok..."The '72" (rolling) Tim "Don't call me a redneck. I'm a rough cut country gentleman" R.I.P. ~ East Side Low Life ~ El Jay ~ 72BLUZ ~ Fasteddie69 ~ Ron586 ~ 67ChevyRedneck ~ Grumpy Old Man ~



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.