took the leap. Cut my dash. - The 1947 - Present Chevrolet & GMC Truck Message Board Network

RIA69 · 11-07-2010, 07:44 PM

ok so this was pretty much one of my first mods to my truck other then a few part installs. so what do you think? did I do a good job at getting it done? I used a dremal tool with a cutting wheel. only took about 15 mins to actually cut it. the rest of the time was getting it to balance right. was a little back heavy to I placed some rubber washers between the ash tray and radio sleeve.

AceX · 11-07-2010, 07:45 PM

So proud of you...

Now if only more guys would become men and cut something up lol

kalirodding · 11-07-2010, 08:01 PM

Congratulations, you just ruined your truck.

RIA69 · 11-07-2010, 08:13 PM

Quote:

Originally Posted by kalirodding

Congratulations, you just ruined your truck.

well lucky for me its mine right? It will never be original again any way so that is why I cut it. to each his own and thank you for your kind words.

*stich626* · 11-07-2010, 11:12 PM

I'd find a way to support the back of the radio.. the head units get kinda hot..
and that rubber support will not like it..
radio shack and others,maybe lowes/home depot too.
it'a a 3/4" wide strap that has holes in it every 1/2"

RIA69 · 11-08-2010, 12:21 AM

Quote:

Originally Posted by stich626

I'd find a way to support the back of the radio.. the head units get kinda hot..
and that rubber support will not like it..
radio shack and others,maybe lowes/home depot too.
it'a a 3/4" wide strap that has holes in it every 1/2"

that's what I was going to do, I thought I had some laying around but come to find out I don't so this is just a temp thing. the rubber piece is actually and old rubber PCV grommet from a valve cover that I no longer needed so it should be OK for a little bit heat wise. Or so I hope anyways

***Liz*** · 11-08-2010, 10:51 AM

Quote:

Originally Posted by kalirodding

Congratulations, you just ruined your truck.

Please review the site rules before posting again. Its fine to be a stock guy, not so fine to be rude about it.

Thanks!

MrDude_1 · 11-08-2010, 11:35 AM

your stereo probably came with a lug that can go on the back.. it should look like a big thick pin.
if you get a rubber grommet that fits that pin, you can make a simple bracket with a hole in it.
mount the bracket under the dash, and when you slide the radio in, the pin will go in the hole and support the back of your stereo.

if you dont mount the back of it, it will eventually break either the radio mount sleeve, or twist the dash (or both).

kalirodding · 11-09-2010, 12:22 AM

Wasn't trying to be rude, geez. Some people need thicker skin I guess. I apologize if I insulted anyone.

RIA69 · 11-09-2010, 10:29 PM

Quote:

Originally Posted by kalirodding

Wasn't trying to be rude, geez. Some people need thicker skin I guess. I apologize if I insulted anyone.

no insult taken here trust me I HAVE thick skin, I have to to deal with the crap I do everyday. that's why I posted the smart a-- comment. no harm no foul.

lilpoindexter · 11-09-2010, 11:43 PM

My '78 had the bezel cut for a radio...If it still had the OG radio, I would have put the radio under the dash, or in the glovebox...it was already cut so I just put a nicer radio in it...I bought a kit from crutchfield...it came with a thin gage sheetmetal bracket for the back, that I supported from some nearby bracket, to prop the radio up. you can use any little piece of sheet metal, or even that plumber's strap stuff.

Bad70sbchevy · 11-13-2010, 02:18 AM

A support strap would be a good idea, but you dont need one. I'm running mine without one and its holdin up well.

motornut · 11-26-2010, 07:42 AM

i put a strap on mine as i find sometimes the radio must bounce as the cd skips as the truck bounces

Andy4639 · 12-14-2010, 07:14 PM

Nice job. I would put a strap on the back. My 71 had a place already there for the factory speaker mount. I used it to support the back of the radio.

11-07-2010, 07:44 PM	#1
RIA69 Registered User Join Date: Aug 2010 Location: logan utah Posts: 78	took the leap. Cut my dash. ok so this was pretty much one of my first mods to my truck other then a few part installs. so what do you think? did I do a good job at getting it done? I used a dremal tool with a cutting wheel. only took about 15 mins to actually cut it. the rest of the time was getting it to balance right. was a little back heavy to I placed some rubber washers between the ash tray and radio sleeve. Attached Images __________________ 1969 C20 3/4 ΜΟΛΩΝ ΛΑΒΕ

11-07-2010, 07:45 PM	#2
AceX >130dB Moderator Join Date: Aug 2006 Location: Sacramento, CA Posts: 2,130	Re: took the leap. Cut my dash. So proud of you... Now if only more guys would become men and cut something up lol __________________ Living Life @ 130dB LED Tail Light Conversion; How-to Friend. Father. Brother. RIP El Jay ------------------------------------------------------------------------------------------------------------------------- CLICK HERE and for less than $0.07 a day, you too can help support and build a better forum.

11-07-2010, 08:01 PM	#3
kalirodding CLASSIX Truck Club Join Date: Oct 2009 Location: Lodi Ca Posts: 318	Re: took the leap. Cut my dash. Congratulations, you just ruined your truck.

11-07-2010, 11:12 PM	#5
stich626 Account Suspended Join Date: Sep 2010 Location: hingham ma Posts: 1,721	Re: took the leap. Cut my dash. I'd find a way to support the back of the radio.. the head units get kinda hot.. and that rubber support will not like it.. radio shack and others,maybe lowes/home depot too. it'a a 3/4" wide strap that has holes in it every 1/2"

11-08-2010, 11:35 AM	#8
MrDude_1 Registered User Join Date: Aug 2010 Location: Charleston, SC Posts: 311	Re: took the leap. Cut my dash. your stereo probably came with a lug that can go on the back.. it should look like a big thick pin. if you get a rubber grommet that fits that pin, you can make a simple bracket with a hole in it. mount the bracket under the dash, and when you slide the radio in, the pin will go in the hole and support the back of your stereo. if you dont mount the back of it, it will eventually break either the radio mount sleeve, or twist the dash (or both).

11-09-2010, 12:22 AM	#9
kalirodding CLASSIX Truck Club Join Date: Oct 2009 Location: Lodi Ca Posts: 318	Re: took the leap. Cut my dash. Wasn't trying to be rude, geez. Some people need thicker skin I guess. I apologize if I insulted anyone.

11-09-2010, 11:43 PM	#11
lilpoindexter Registered User Join Date: Sep 2010 Location: los angeles Posts: 1,134	Re: took the leap. Cut my dash. My '78 had the bezel cut for a radio...If it still had the OG radio, I would have put the radio under the dash, or in the glovebox...it was already cut so I just put a nicer radio in it...I bought a kit from crutchfield...it came with a thin gage sheetmetal bracket for the back, that I supported from some nearby bracket, to prop the radio up. you can use any little piece of sheet metal, or even that plumber's strap stuff.

11-13-2010, 02:18 AM	#12
Bad70sbchevy Registered User Join Date: Aug 2009 Location: Newberry,FL Posts: 277	Re: took the leap. Cut my dash. A support strap would be a good idea, but you dont need one. I'm running mine without one and its holdin up well. __________________ 1970 Chevrolet C-10 w/355sbc 2010 Silverado Daily Driver 1971 Mercedes 280sl project car

11-26-2010, 07:42 AM	#13
motornut 78K & 79C Jimmys Join Date: Nov 2009 Location: Ottawa Ont CANADA Posts: 7,901	Re: took the leap. Cut my dash. i put a strap on mine as i find sometimes the radio must bounce as the cd skips as the truck bounces __________________ John 1978 GMCJimmy4X4-350/203 1979 GMCJimmy4X2-305/350

12-14-2010, 07:14 PM	#14
Andy4639 Old member Join Date: Jan 2002 Location: Liberty, & Garden City S.C. , U.S. Posts: 19,945	Re: took the leap. Cut my dash. Nice job. I would put a strap on the back. My 71 had a place already there for the factory speaker mount. I used it to support the back of the radio. __________________ 1971 LWB Custom, 6.0LS & 4L80E, Speedhut.com GPS speedometer & gauges with A/C. 20" Boss 338's Grey wheels 4 wheel disc brakes. My Driver Seeing the USA in a 71 Upstate SC GM Truck Club 2013,14 and 2016 Hot Rod Pour Tour http://upstategmtrucks.com/ Get out and drive the truck this summer and have some fun! It sucks not being able to hear! LWB trucks rule, if you don't think so measure your SWB! After talking to tech support at Air Lift I have found out that the kit I need is 60811. Per the measurements I gave them. Ride height of truck inside spring and inside diameter of springs.



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.