Master cylinder question - The 1947 - Present Chevrolet & GMC Truck Message Board Network

Trucknut57 · 11-08-2010, 06:57 PM

I'm gathering all the parts for the 57 so i can switch from non power disc/drum to hydroboosted disc/disc. Here is what I have so far; hydroboost unit from a 93 astro van, backing plates, calipers, and brackets from a 98 blazer.

I need some help finding a master cylinder I can use that has a remote resivoir with the disc/disc setup. I want to keep the unit under the floor board and mount the resivoir on the firewall.

I have seen a couple ideas for this setup so far, but I would like some other ideas. Anyone got some???

Thanks in advance.

Wess

Kim57 · 11-08-2010, 07:19 PM

Here are a few ideas for what you want to do.
Kim
http://www.streetrodstuff.com/Products/76/
http://www.pitstopusa.com/SearchResu...CategoryID=553

Tri5Nerd · 11-08-2010, 08:07 PM

Where would you find the brass MC covers that the hose connects to?

Tri5

Trucknut57 · 11-08-2010, 08:20 PM

Thats very close to what I'm looking for. Thanks for the link.

I did find this one, which is close and only cost $80.
http://kingtuttonline.com/~rjays2/in...roducts_id=960

Kim57 · 11-09-2010, 01:33 AM

It looks like Kugel has them.
http://www.kugelkomponents.com/produ...kesystem1.html
The one in the pic is from these guys.
http://www.mpbrakes.com/products/pro...product_id=670
Kim

11-08-2010, 06:57 PM	#1
Trucknut57 Registered User Join Date: Aug 2010 Location: Jennings, OK Posts: 323	Master cylinder question I'm gathering all the parts for the 57 so i can switch from non power disc/drum to hydroboosted disc/disc. Here is what I have so far; hydroboost unit from a 93 astro van, backing plates, calipers, and brackets from a 98 blazer. I need some help finding a master cylinder I can use that has a remote resivoir with the disc/disc setup. I want to keep the unit under the floor board and mount the resivoir on the firewall. I have seen a couple ideas for this setup so far, but I would like some other ideas. Anyone got some??? Thanks in advance. Wess __________________ Somehow, the idiots survive despite their best efforts to kill themselves. - dcozzi

11-08-2010, 07:19 PM	#2
Kim57 Registered User Join Date: Aug 2007 Location: Corona, California Posts: 7,998	Re: Master cylinder question Here are a few ideas for what you want to do. Kim http://www.streetrodstuff.com/Products/76/ http://www.pitstopusa.com/SearchResu...CategoryID=553

11-08-2010, 08:07 PM	#3
Tri5Nerd Tripple Five Fanatic Join Date: Sep 2006 Location: USA Posts: 658	Re: Master cylinder question Where would you find the brass MC covers that the hose connects to? Tri5 __________________ 1955 Chevy Stepside/LS1 drive train http://67-72chevytrucks.com/vboard/s...d.php?t=371513

11-08-2010, 08:20 PM	#4
Trucknut57 Registered User Join Date: Aug 2010 Location: Jennings, OK Posts: 323	Re: Master cylinder question Thats very close to what I'm looking for. Thanks for the link. I did find this one, which is close and only cost $80. http://kingtuttonline.com/~rjays2/in...roducts_id=960 __________________ Somehow, the idiots survive despite their best efforts to kill themselves. - dcozzi Last edited by Trucknut57; 11-08-2010 at 09:17 PM.

11-09-2010, 01:33 AM	#5
Kim57 Registered User Join Date: Aug 2007 Location: Corona, California Posts: 7,998	Re: Master cylinder question It looks like Kugel has them. http://www.kugelkomponents.com/produ...kesystem1.html The one in the pic is from these guys. http://www.mpbrakes.com/products/pro...product_id=670 Kim



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.