old parts = blazer/truck convert???? - The 1947 - Present Chevrolet & GMC Truck Message Board Network

ortegamotor · 11-13-2010, 11:55 AM

does anyone have any info on how this was built? i have plenty of parts to do this , and i think it would be the perfect way to clean up all the extra stuff i have around the shop. any in site into this truck would be appreciated very much.

MAK191 · 11-13-2010, 12:03 PM

I think I remember reading that it was actually built from a longbed truck.

ortegamotor · 11-13-2010, 12:07 PM

thats what i'm thinking as well. i really want to know what frame to start with and some measurements . someone on here should know something about it. thanks for any help.

ksbrktracer · 11-14-2010, 12:09 AM

Have no idea what the frame is .......guessin its a blazer, but not sure , maybe its a shortened up long frame ???? , rest looks like long bed bedsides slid forward to the front fenders and wheel openings moved to match the wheel base ..... AND yes ... it is kool and I want to build one cuz I cant find a good blazer canidate to build ....thats affordable or close

Jacfourteen · 11-14-2010, 03:02 AM

That's pretty sweet! I don't think I would want to use it for a daily though, no top or doors would get old pretty quick. Although getting in with it aired out would probably be pretty easy!

ortegamotor · 11-14-2010, 10:42 AM

anything yet??? tttt

ortegamotor · 11-15-2010, 05:28 PM

i'll try one more time. i was wondering if anyone has any build info on this. thanks for looking. T

ttt

bigguy69 · 11-15-2010, 07:49 PM

it was in a magazine, i dont remeber which one. i will see if i can find it

VA72C10 · 11-17-2010, 12:51 AM

Really thinking I should do this as my next build also...

dixietruck71 · 02-16-2011, 09:55 AM

the magazine said it was long bed sides welded to the front fenders. on a shortened blazer frame. it was in street trucks magazine i believe the jan.2011 issue but thats all they said. i want more too

skunkwerx · 02-23-2011, 10:51 AM

Anymore info on this, just bought a long bed truck so I can have one?
Posted via Mobile Device

FlounderGDI · 02-23-2011, 03:09 PM

It does look awesome... And just think... no swiss cheese rockers, cab corners, drip rails, or over the window rot... All the good stuff minus a rusty cab... ;-)

11-13-2010, 11:55 AM	#1
ortegamotor Registered User Join Date: Jun 2006 Location: auburn california Posts: 1,147	old parts = blazer/truck convert???? does anyone have any info on how this was built? i have plenty of parts to do this , and i think it would be the perfect way to clean up all the extra stuff i have around the shop. any in site into this truck would be appreciated very much. Attached Images

11-13-2010, 12:03 PM	#2
MAK191 Registered User Join Date: Nov 2009 Location: FL Posts: 335	Re: old parts = blazer/truck convert???? I think I remember reading that it was actually built from a longbed truck.

11-13-2010, 12:07 PM	#3
ortegamotor Registered User Join Date: Jun 2006 Location: auburn california Posts: 1,147	Re: old parts = blazer/truck convert???? thats what i'm thinking as well. i really want to know what frame to start with and some measurements . someone on here should know something about it. thanks for any help.

11-14-2010, 12:09 AM	#4
ksbrktracer TNT-MOTORSPORTS Join Date: Mar 2008 Location: TULSA OKLAHOMA Posts: 2,692	Re: old parts = blazer/truck convert???? Have no idea what the frame is .......guessin its a blazer, but not sure , maybe its a shortened up long frame ???? , rest looks like long bed bedsides slid forward to the front fenders and wheel openings moved to match the wheel base ..... AND yes ... it is kool and I want to build one cuz I cant find a good blazer canidate to build ....thats affordable or close Last edited by ksbrktracer; 11-14-2010 at 12:10 AM.

11-14-2010, 03:02 AM	#5
Jacfourteen Big Red - Now its a SWB! Join Date: Jun 2009 Location: Oroville, Ca Posts: 1,624	Re: old parts = blazer/truck convert???? That's pretty sweet! I don't think I would want to use it for a daily though, no top or doors would get old pretty quick. Although getting in with it aired out would probably be pretty easy! __________________ 68 3/4 ton (Project)-350 Small Block, .030 over, 10:1 comp, 3998993 heads, C3BX edelbrock intake, comp cams XE268, Holley 670 SA, long tube headers, dual flow 40's, E-fan, Alum rad, currently under the knife getting shortened and bagged build thread 41 3/4 ton (wife's)-flatbed, fully restored to original 01 Tahoe LT 4WD (my daily driver)-Magnaflow Muffler, Rollin on 22's 02 Ford Mustang Convertable (Wife's Car)-Flowmaster 50, Clear corners, Intake, sittin on 18's

11-14-2010, 10:42 AM	#6
ortegamotor Registered User Join Date: Jun 2006 Location: auburn california Posts: 1,147	Re: old parts = blazer/truck convert???? anything yet??? tttt

11-15-2010, 05:28 PM	#7
ortegamotor Registered User Join Date: Jun 2006 Location: auburn california Posts: 1,147	Re: old parts = blazer/truck convert???? i'll try one more time. i was wondering if anyone has any build info on this. thanks for looking. T ttt

11-15-2010, 07:49 PM	#8
bigguy69 dazed and confused Join Date: Jul 2008 Location: marion nc Posts: 1,649	Re: old parts = blazer/truck convert???? it was in a magazine, i dont remeber which one. i will see if i can find it __________________ members met: redbaron69, billsbowtie,nc67

11-17-2010, 12:51 AM	#9
VA72C10 VA72C10 Join Date: Mar 2008 Location: Midlothian, VA Posts: 25,269	Re: old parts = blazer/truck convert???? Really thinking I should do this as my next build also... __________________ Looking for a 67-72 swb or blazer project in or around VA.

02-16-2011, 09:55 AM	#10
dixietruck71 Registered User Join Date: Dec 2010 Location: ravensdale washington Posts: 111	Re: old parts = blazer/truck convert???? the magazine said it was long bed sides welded to the front fenders. on a shortened blazer frame. it was in street trucks magazine i believe the jan.2011 issue but thats all they said. i want more too __________________ 71 gme Sierra Grande lwb. 68 Rambler American 2 door 75 jeep cj5

02-23-2011, 10:51 AM	#11
skunkwerx Registered User Join Date: Oct 2006 Location: oklahoma Posts: 238	Re: old parts = blazer/truck convert???? Anymore info on this, just bought a long bed truck so I can have one? Posted via Mobile Device __________________ Skunkwerx

02-23-2011, 03:09 PM	#12
FlounderGDI Registered User Join Date: Sep 2009 Location: Lafayette, Indiana Posts: 339	Re: old parts = blazer/truck convert???? It does look awesome... And just think... no swiss cheese rockers, cab corners, drip rails, or over the window rot... All the good stuff minus a rusty cab... ;-) __________________ 1969 CST/10 "GreenAndWhite" 1974 Nova (SOLD... End of an Era) 2000 Impala (RIP) 2008 Malibu Brand Loyal... I've never owned a Vehicle not made by Chevrolet.



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.