AL Parting out '72 GMC - The 1947 - Present Chevrolet & GMC Truck Message Board Network

faribran · 11-23-2010, 11:22 AM

I bought this '72 Long bed from a guy that I work with. I was going to build it and drive it, but as many of us know money has gotten tight, especially being the Christmas is right around the corner. I will post the pictures up this afternoon if all goes well. Please feel free to PM me any questions or concerns you might have.

Entire truck as it sits -- $1200 obo

Exterior mirrors -- SOLD

Throttle Linkage -- SOLD

Headliner and Trim -- SOLD

Passenger Door -- $150.oo or obo

Front Bumper -- SOLD

Driver Door -- $150.00 or obo

Driver side Fender -- $100.00 or obo

Kickdown Bracket -- SOLD

Passenger side Fender -- $100.00 obo

V8 Towers -- SOLD

4 core Radiator -- $100.00 obo

Accelerator pedal assembly -- SOLD

Front sway bar -- $75.00 obo

1968 - 72 Chevy/GMC Hood -- $175.00 or obo

GMC Core Support -- $50.00 obo

Drive shaft -- $25.00 obo

Steering Wheel Grant GT -- SOLD

Master cylinder booster pump and proportioning valve, comes with bracket and rod -- $200.00 or obo

Bench seat -- $75.00 or obo

Turbo 400 Transmission - $400.00 or obo

Power steering box -- $75.00 or obo

Inner fenders (left & right) -- $50.00 for the pair obo

Hood hinges -- $30.00 for the set -- or obo

Gas tank -- $75.00 or obo

Rear end (I'm not sure the gearing or posi, but I will find out. Truck was running and driving less than a month ago) -- $300.00 or obo

AC CAb -- $300.00 or obo

Dash Pad -- SOLD

Transmission cross member -- $75.00 or obo

Long bed, bed liner -- $50.00 or obo

Brake pedal assembly -- $30

A/C and Heater control -- $80

Shifter linkage -- $40

HEI distributor -- $75

Thank you,

Richard

bdeese · 11-23-2010, 11:34 AM

Is there an engine? Sorry if I missed it, im on my phone. And where in al are you? May be interested in whole truck.
Posted via Mobile Device

projectjimmie68 · 11-23-2010, 11:54 AM

How much for transmission lines if in one piece shipped to zip 32136? Thanks

faribran · 11-23-2010, 12:05 PM

There is no engine.

A few more pictures

faribran · 11-23-2010, 12:11 PM

I will have to check the transmission lines when I get home.

budnikguy · 11-23-2010, 12:12 PM

is 1/2 or 3/4 ton?

faribran · 11-23-2010, 12:34 PM

It's a 1/2 ton long bed

Youngbuck7072 · 11-23-2010, 12:35 PM

Tail light chrome trim??

faribran · 11-23-2010, 12:40 PM

The tail lights do not have chrome trim.

budnikguy · 11-23-2010, 12:41 PM

front disc brake, brake lines, all from master cylinder/ pv and to both sides along the crossmember?

faribran · 11-23-2010, 12:45 PM

So you are wanting to know what my price would be for the complete K member with brake lines intact? Or are you asking about the transmission crossmember.

67gmcstepside · 11-23-2010, 12:48 PM

I could use the steel e-brack cable ans connectors.

ralphie628 · 11-23-2010, 12:58 PM

How much for both door regulators and this bracket off the booster? Any tach dash or tilt steering? what color is the interior? might be interested in the headliner and seat beats. is the grant steering wheel the woodgrain one? thanks

budnikguy · 11-23-2010, 01:06 PM

Sorry to sound confusing, I just need the actual brake lines...no crossmember. Switching to disc brake front on my '69....

Quote:

Originally Posted by faribran

So you are wanting to know what my price would be for the complete K member with brake lines intact? Or are you asking about the transmission crossmember.

faribran · 11-23-2010, 01:59 PM

PM sent

**k5blazin** · 11-23-2010, 02:05 PM

interested in the doors! what shape are they in?

makamer · 11-23-2010, 02:07 PM

Do you have a jack, jack handle and tire iron for a 1972 C10?

What about an auxilary battery tray?

Both need to be in good condition.

faribran · 11-23-2010, 02:08 PM

Both doors are in good shape. I should have pictures up later on today.

faribran · 11-23-2010, 02:16 PM

I'm sorry I do not have an aux battery tray, and I will check for the jack, jack handle and tire iron when I get home.

Jobe72 · 11-23-2010, 05:04 PM

Happen to have a passenger side sport mirror?

faribran · 11-23-2010, 05:12 PM

It does have a sport mirror on the passenger side, but the mirror itself is cracked.

Jobe72 · 11-23-2010, 06:48 PM

Quote:

Originally Posted by faribran

It does have a sport mirror on the passenger side, but the mirror itself is cracked.

If you can get a photo I'm interested regardless. Thanks.

flashed · 11-23-2010, 07:57 PM

I would like to get in line on the doors pending pictures. Also where in Alabama are you located ?

faribran · 11-23-2010, 08:02 PM

I am located in Headland, AL. Roughly 9 outside of Dothan

faribran · 11-23-2010, 08:41 PM

A few pictures added, I will finish adding the rest tonight or tomorrow. My camera is on the fritz for some reason

11-23-2010, 11:22 AM	#1
faribran Registered User Join Date: Jul 2005 Location: AL Posts: 1,828	Parting out '72 GMC I bought this '72 Long bed from a guy that I work with. I was going to build it and drive it, but as many of us know money has gotten tight, especially being the Christmas is right around the corner. I will post the pictures up this afternoon if all goes well. Please feel free to PM me any questions or concerns you might have. Entire truck as it sits -- $1200 obo Exterior mirrors -- SOLD Throttle Linkage -- SOLD Headliner and Trim -- SOLD Passenger Door -- $150.oo or obo Front Bumper -- SOLD Driver Door -- $150.00 or obo Driver side Fender -- $100.00 or obo Kickdown Bracket -- SOLD Passenger side Fender -- $100.00 obo V8 Towers -- SOLD 4 core Radiator -- $100.00 obo Accelerator pedal assembly -- SOLD Front sway bar -- $75.00 obo 1968 - 72 Chevy/GMC Hood -- $175.00 or obo GMC Core Support -- $50.00 obo Drive shaft -- $25.00 obo Steering Wheel Grant GT -- SOLD Master cylinder booster pump and proportioning valve, comes with bracket and rod -- $200.00 or obo Bench seat -- $75.00 or obo Turbo 400 Transmission - $400.00 or obo Power steering box -- $75.00 or obo Inner fenders (left & right) -- $50.00 for the pair obo Hood hinges -- $30.00 for the set -- or obo Gas tank -- $75.00 or obo Rear end (I'm not sure the gearing or posi, but I will find out. Truck was running and driving less than a month ago) -- $300.00 or obo AC CAb -- $300.00 or obo Dash Pad -- SOLD Transmission cross member -- $75.00 or obo Long bed, bed liner -- $50.00 or obo Brake pedal assembly -- $30 A/C and Heater control -- $80 Shifter linkage -- $40 HEI distributor -- $75 Thank you, Richard Attached Images __________________ " Last edited by faribran; 12-12-2010 at 10:37 AM.

11-23-2010, 11:34 AM	#2
bdeese Registered User Join Date: Apr 2005 Location: Byron, Ga Posts: 150	Re: Parting out '72 GMC Is there an engine? Sorry if I missed it, im on my phone. And where in al are you? May be interested in whole truck. Posted via Mobile Device

11-23-2010, 11:54 AM	#3
projectjimmie68 Registered User Join Date: Oct 2009 Location: Flagler Beach,Fl. Posts: 455	Re: Parting out '72 GMC How much for transmission lines if in one piece shipped to zip 32136? Thanks

11-23-2010, 12:05 PM	#4
faribran Registered User Join Date: Jul 2005 Location: AL Posts: 1,828	Re: Parting out '72 GMC There is no engine. A few more pictures Attached Images __________________ " Last edited by faribran; 11-25-2010 at 08:36 AM.

11-23-2010, 12:11 PM	#5
faribran Registered User Join Date: Jul 2005 Location: AL Posts: 1,828	Re: Parting out '72 GMC I will have to check the transmission lines when I get home. __________________ "

11-23-2010, 12:12 PM	#6
budnikguy Registered User Join Date: Sep 2007 Location: Riverside, CA Posts: 4,316	Re: Parting out '72 GMC is 1/2 or 3/4 ton?

11-23-2010, 12:34 PM	#7
faribran Registered User Join Date: Jul 2005 Location: AL Posts: 1,828	Re: Parting out '72 GMC It's a 1/2 ton long bed __________________ "

11-23-2010, 12:35 PM	#8
Youngbuck7072 Registered User Join Date: Sep 2010 Location: Eugene, Or. Posts: 322	Re: Parting out '72 GMC Tail light chrome trim?? __________________ ........................ __ ............._______\|__\____ ............\|_({})______({})] ................(O)..........(O)

11-23-2010, 12:40 PM	#9
faribran Registered User Join Date: Jul 2005 Location: AL Posts: 1,828	Re: Parting out '72 GMC The tail lights do not have chrome trim. __________________ "

11-23-2010, 12:41 PM	#10
budnikguy Registered User Join Date: Sep 2007 Location: Riverside, CA Posts: 4,316	Re: Parting out '72 GMC front disc brake, brake lines, all from master cylinder/ pv and to both sides along the crossmember?

11-23-2010, 12:45 PM	#11
faribran Registered User Join Date: Jul 2005 Location: AL Posts: 1,828	Re: Parting out '72 GMC So you are wanting to know what my price would be for the complete K member with brake lines intact? Or are you asking about the transmission crossmember. __________________ "

11-23-2010, 12:48 PM	#12
67gmcstepside Registered User Join Date: Jan 2010 Location: jackson Posts: 676	Re: Parting out '72 GMC I could use the steel e-brack cable ans connectors.

11-23-2010, 12:58 PM	#13
ralphie628 Registered User Join Date: Dec 2009 Location: Chatsworth CA Posts: 243	Re: Parting out '72 GMC How much for both door regulators and this bracket off the booster? Any tach dash or tilt steering? what color is the interior? might be interested in the headliner and seat beats. is the grant steering wheel the woodgrain one? thanks Attached Images

11-23-2010, 01:59 PM	#15
faribran Registered User Join Date: Jul 2005 Location: AL Posts: 1,828	Re: Parting out '72 GMC PM sent __________________ "

11-23-2010, 02:05 PM	#16
k5blazin Senior Member Join Date: Oct 2009 Location: potsdam ny Posts: 401	Re: Parting out '72 GMC interested in the doors! what shape are they in?



Register or Log In To remove these advertisements.

11-23-2010, 02:07 PM	#17
makamer Registered User Join Date: Jun 2004 Location: Overland Park, KS Posts: 315	Re: Parting out '72 GMC Do you have a jack, jack handle and tire iron for a 1972 C10? What about an auxilary battery tray? Both need to be in good condition.

11-23-2010, 02:08 PM	#18
faribran Registered User Join Date: Jul 2005 Location: AL Posts: 1,828	Re: Parting out '72 GMC Both doors are in good shape. I should have pictures up later on today. __________________ "

11-23-2010, 02:16 PM	#19
faribran Registered User Join Date: Jul 2005 Location: AL Posts: 1,828	Re: Parting out '72 GMC I'm sorry I do not have an aux battery tray, and I will check for the jack, jack handle and tire iron when I get home. __________________ "

11-23-2010, 05:04 PM	#20
Jobe72 Registered User Join Date: Mar 2010 Location: Austin, TX Posts: 299	Re: Parting out '72 GMC Happen to have a passenger side sport mirror? __________________ 1972 GMC Sierra LWB (Aquafresh) 1962 Cadillac Convertible 1962 Cadillac Sedan project

11-23-2010, 05:12 PM	#21
faribran Registered User Join Date: Jul 2005 Location: AL Posts: 1,828	Re: Parting out '72 GMC It does have a sport mirror on the passenger side, but the mirror itself is cracked. __________________ "

11-23-2010, 07:57 PM	#23
flashed Registered User Join Date: Oct 2009 Location: canton ga Posts: 12,728	Re: Parting out '72 GMC I would like to get in line on the doors pending pictures. Also where in Alabama are you located ?

11-23-2010, 08:02 PM	#24
faribran Registered User Join Date: Jul 2005 Location: AL Posts: 1,828	Re: Parting out '72 GMC I am located in Headland, AL. Roughly 9 outside of Dothan __________________ "

11-23-2010, 08:41 PM	#25
faribran Registered User Join Date: Jul 2005 Location: AL Posts: 1,828	Re: Parting out '72 GMC A few pictures added, I will finish adding the rest tonight or tomorrow. My camera is on the fritz for some reason __________________ "

Register or Log In To remove these advertisements.