Register or Log In To remove these advertisements. |
|
|
|
Thread Tools | Display Modes |
11-23-2010, 01:16 PM | #1 |
HOW long until spring??
Join Date: Mar 2009
Location: Star Idaho
Posts: 1,413
|
Clifford 6=8 intake manifold
Hey guys here it is-- A Clifford six cylinder intake for your 194 230 250 292 Inline six
Model C-4501 (non heated) intake to install a single 4 barrel on your inline 6 I went looking for one and ended up with two, so I will pass this on along to somebody else Threads are all good, no cracks or breaks, but PO has done a little light grinding on the lower side on the edge (probably to clear the steering shaft in a super six sprint car) Still very thick at that spot and should not be a issue. (See bottom picture) It will need a adapter plate to what ever carburetor you are using and these can be made or purchased from Clifford. Runners are clean and appears to have had very light use. First $150 plus shipping takes it. Weight is roughly 7.8 lbs unboxed on a bathroom scale My zip is 83669 so you can calculate approximate shipping charges. I know you have been really good this year so buy yourself a early Christmas present!
__________________
69 chevelle convertible 71-C-10 short-wide and low 64 C-10 custom shortbox "Bubba"s Recycling project" |
12-14-2010, 11:35 PM | #2 |
HOW long until spring??
Join Date: Mar 2009
Location: Star Idaho
Posts: 1,413
|
Re: Clifford 6=8 intake manifold
TTT Last Call
Okay guys, it will be on Ebay, after Christmas
__________________
69 chevelle convertible 71-C-10 short-wide and low 64 C-10 custom shortbox "Bubba"s Recycling project" |
12-28-2010, 04:02 PM | #3 |
HOW long until spring??
Join Date: Mar 2009
Location: Star Idaho
Posts: 1,413
|
Re: Clifford 6=8 intake manifold
TTT --update
Sold on E-bay for $264.00
__________________
69 chevelle convertible 71-C-10 short-wide and low 64 C-10 custom shortbox "Bubba"s Recycling project" |
12-28-2010, 07:08 PM | #4 |
Registered User
Join Date: Nov 2008
Location: Gwinnett GA
Posts: 1,803
|
Re: Clifford 6=8 intake manifold
wow you did well.... I don't imagine it goes for much more than that brand new at the 6-cyl speed shops online!
__________________
1982 K10 SWB 1987 V20 - Sold - Doh! |
12-28-2010, 08:42 PM | #5 |
HOW long until spring??
Join Date: Mar 2009
Location: Star Idaho
Posts: 1,413
|
Re: Clifford 6=8 intake manifold
I could not believe all the interest From Brazil on this item and for other 6 cylinder parts I have listed previously . Parts are hard to find there I guess
happy new year thanks guys bubba
__________________
69 chevelle convertible 71-C-10 short-wide and low 64 C-10 custom shortbox "Bubba"s Recycling project" |
Bookmarks |
|
|