NC SB Heat Riser Tube and Shield - The 1947 - Present Chevrolet & GMC Truck Message Board Network

brn agn · 11-27-2010, 01:57 PM

I realized that these parts are not doing me any good sitting on my workbench and I will likely not put them back on my truck. These are factory parts from my 1969 C/10 307. As you can see in the pictures, the metal is thin towards the bottom. Everything else seems to be in good shape. $50 shipped to the lower 48 States.

Per Forum rules, if you would like to purchase these parts, please reply to this thread.

brn agn · 12-14-2010, 01:33 PM

Still have this if anyone is interested. Don't be afraid to make an offer on it.

1956cameo · 01-04-2011, 07:54 PM

Do you know if it will fit on a stock 350 exhaust system? If it will I would be willing to give you $35 shipped to 77584.

brn agn · 01-04-2011, 08:56 PM

As far as I know, the 307 and 350 engines used the same exhaust manifolds. Do you still have factory ram horn's manifolds?

1956cameo · 01-05-2011, 01:15 PM

I have a few old exhaust manifolds, however I am not sure what year trucks they are from. I bought a 1972 2wd blazer without an engine but I already had a mid 70's model 350 engine. My plan is to get all the factory 72' engine components to put on my engine so it looks original. I figured I would get a heat shield and see if it fit on any of the manifolds I had in storage.

brn agn · 01-05-2011, 01:40 PM

I will sell it for $35 shipped, if you don't mind taking the small risk that it won't work with your manifolds. Just let me know.

1956cameo · 01-09-2011, 03:45 PM

I greatly apologize. I did not see where you had responded back for me and I ended up buying another set yesterday. I am very sorry. If I find anyone else that is looking for this I will send them your way.

brn agn · 01-09-2011, 04:47 PM

No hard feelings here! Thanks for checking in.

11-27-2010, 01:57 PM	#1
brn agn Registered User Join Date: Mar 2009 Location: Youngsville, NC Posts: 952	SB Heat Riser Tube and Shield I realized that these parts are not doing me any good sitting on my workbench and I will likely not put them back on my truck. These are factory parts from my 1969 C/10 307. As you can see in the pictures, the metal is thin towards the bottom. Everything else seems to be in good shape. $50 shipped to the lower 48 States. Per Forum rules, if you would like to purchase these parts, please reply to this thread. __________________ 1969 C10 SWB Project Charity Case AKA "Roscoe" 1971 Cheyenne Super A Combined Effort The Service Station-A practical ministry for those in need Last edited by brn agn; 11-27-2010 at 02:10 PM.

12-14-2010, 01:33 PM	#2
brn agn Registered User Join Date: Mar 2009 Location: Youngsville, NC Posts: 952	Re: SB Heat Riser Tube and Shield Still have this if anyone is interested. Don't be afraid to make an offer on it. __________________ 1969 C10 SWB Project Charity Case AKA "Roscoe" 1971 Cheyenne Super A Combined Effort The Service Station-A practical ministry for those in need

01-04-2011, 07:54 PM	#3
1956cameo Registered User Join Date: Apr 2008 Location: Angleton, TX Posts: 2,219	Re: SB Heat Riser Tube and Shield Do you know if it will fit on a stock 350 exhaust system? If it will I would be willing to give you $35 shipped to 77584. __________________ I don't always drive trucks; but when I do I prefer Chevy's. Stay driving my friends. '72 blazer 2wd build 67-72 Factory Big Block Registry

01-04-2011, 08:56 PM	#4
brn agn Registered User Join Date: Mar 2009 Location: Youngsville, NC Posts: 952	Re: SB Heat Riser Tube and Shield As far as I know, the 307 and 350 engines used the same exhaust manifolds. Do you still have factory ram horn's manifolds? __________________ 1969 C10 SWB Project Charity Case AKA "Roscoe" 1971 Cheyenne Super A Combined Effort The Service Station-A practical ministry for those in need

01-05-2011, 01:15 PM	#5
1956cameo Registered User Join Date: Apr 2008 Location: Angleton, TX Posts: 2,219	Re: SB Heat Riser Tube and Shield I have a few old exhaust manifolds, however I am not sure what year trucks they are from. I bought a 1972 2wd blazer without an engine but I already had a mid 70's model 350 engine. My plan is to get all the factory 72' engine components to put on my engine so it looks original. I figured I would get a heat shield and see if it fit on any of the manifolds I had in storage. __________________ I don't always drive trucks; but when I do I prefer Chevy's. Stay driving my friends. '72 blazer 2wd build 67-72 Factory Big Block Registry

01-05-2011, 01:40 PM	#6
brn agn Registered User Join Date: Mar 2009 Location: Youngsville, NC Posts: 952	Re: SB Heat Riser Tube and Shield I will sell it for $35 shipped, if you don't mind taking the small risk that it won't work with your manifolds. Just let me know. __________________ 1969 C10 SWB Project Charity Case AKA "Roscoe" 1971 Cheyenne Super A Combined Effort The Service Station-A practical ministry for those in need

01-09-2011, 03:45 PM	#7
1956cameo Registered User Join Date: Apr 2008 Location: Angleton, TX Posts: 2,219	Re: SB Heat Riser Tube and Shield I greatly apologize. I did not see where you had responded back for me and I ended up buying another set yesterday. I am very sorry. If I find anyone else that is looking for this I will send them your way. __________________ I don't always drive trucks; but when I do I prefer Chevy's. Stay driving my friends. '72 blazer 2wd build 67-72 Factory Big Block Registry

01-09-2011, 04:47 PM	#8
brn agn Registered User Join Date: Mar 2009 Location: Youngsville, NC Posts: 952	Re: SB Heat Riser Tube and Shield No hard feelings here! Thanks for checking in. __________________ 1969 C10 SWB Project Charity Case AKA "Roscoe" 1971 Cheyenne Super A Combined Effort The Service Station-A practical ministry for those in need



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.