59 Chevy Apache 3100 Frame Parts - The 1947 - Present Chevrolet & GMC Truck Message Board Network

potterg · 11-28-2010, 10:04 PM

Hello,

I need some help and figured the best way would be to turn to the knowledge forum..

I am restoring a 59 Chevy Apache & during my frame off restoration (which is still currently in a million pieces) I decided to grind off the old bracket where the master cylinder was mounted on the frame.. (Bonehead Move) Anyway, I was curious to know if anyone knew where to get a new bracket.

Thanks,
Greg

Kim57 · 11-29-2010, 01:28 AM

If it were me I would just make a new one out of some 3/16" plate and weld it on.
Kim

63 & 64 Bowties · 11-29-2010, 08:36 AM

Welcome to the forum. But, I had to edit your post.
Please note that you must be a supporting member to post classified items. This includes but is not limited to What Its Worth, Want To Buy, Want To Trade, and For Sale. Please consider supporting the forum by subscribing. Further information on the subscription levels available are located here

If you need any further assistance with that please contact any Admin for help.

potterg · 11-29-2010, 10:06 AM

Thanks, Kim57.. Thats probably what I'll do..

potterg · 11-29-2010, 10:08 AM

Thanks.. I'll probably do just that..

Greg

11-28-2010, 10:04 PM	#1
potterg Registered User Join Date: Jun 2010 Location: Gainesville, Florida Posts: 17	59 Chevy Apache 3100 Frame Parts Hello, I need some help and figured the best way would be to turn to the knowledge forum.. I am restoring a 59 Chevy Apache & during my frame off restoration (which is still currently in a million pieces) I decided to grind off the old bracket where the master cylinder was mounted on the frame.. (Bonehead Move) Anyway, I was curious to know if anyone knew where to get a new bracket. Thanks, Greg Attached Images Last edited by 63 & 64 Bowties; 11-29-2010 at 08:35 AM. Reason: WTB by non-subscribing member

11-29-2010, 01:28 AM	#2
Kim57 Registered User Join Date: Aug 2007 Location: Corona, California Posts: 7,998	Re: 59 Chevy Apache 3100 Frame Parts If it were me I would just make a new one out of some 3/16" plate and weld it on. Kim

11-29-2010, 08:36 AM	#3
63 & 64 Bowties and a few others Join Date: Jun 2007 Location: Blue Ridge Mountains of VA Posts: 5,638	Re: 59 Chevy Apache 3100 Frame Parts Welcome to the forum. But, I had to edit your post. Please note that you must be a supporting member to post classified items. This includes but is not limited to What Its Worth, Want To Buy, Want To Trade, and For Sale. Please consider supporting the forum by subscribing. Further information on the subscription levels available are located here If you need any further assistance with that please contact any Admin for help. __________________ Bill US Army Vet -193rd Infantry BlueRidgeMuscleCars.com “The greatness of a nation and its moral progress can be judged by the way its animals are treated” Gandhi

11-29-2010, 10:06 AM	#4
potterg Registered User Join Date: Jun 2010 Location: Gainesville, Florida Posts: 17	Re: 59 Chevy Apache 3100 Frame Parts Thanks, Kim57.. Thats probably what I'll do..

11-29-2010, 10:08 AM	#5
potterg Registered User Join Date: Jun 2010 Location: Gainesville, Florida Posts: 17	Re: 59 Chevy Apache 3100 Frame Parts Thanks.. I'll probably do just that.. Greg



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.