Tuckin' Rim - The 1947 - Present Chevrolet & GMC Truck Message Board Network

chevjayfsd · 03-05-2003, 04:32 PM

I am looking at the Vision 256 at visionwheel.com. If i wanted to get the 17x9.5 rim for the rear of my truck, would 5.25 backspacing be enough to tuck it and drag frame?

Thanks
Jason

Slammed67 · 03-05-2003, 06:00 PM

That is the back spacing I have on my 18x9.5's and they tuck. Just don't get too wide of a tire. I think mine are 285/40/18's. If I had gone with any wider of a tire, I probably would of had to go with 5.5" b.s. Right now I've got more clearance on the inner part of the tire that the outer. But you want to keep them as far out as possible to look good. Of course I'm not dragging frame (nor would I want to). But with it dropped on the c-notch, they fit just perfect.

crazy longhorn · 03-05-2003, 08:01 PM

Layin the rails is cool when you are parked........but please tell us you dont plan to make sparks with that pretty truck!

RACING29 · 03-05-2003, 09:10 PM

DRAG IT!!!

chevjayfsd · 03-06-2003, 01:04 PM

Don't worry Longhorn, I am not planning on dragging it sitting or cruising i was just using that to let people I want to tuck the rims. Thanks Slammed for the info

Thanks
Jason

03-05-2003, 04:32 PM	#1
chevjayfsd Project 7dos Join Date: Aug 2001 Location: Abilene, Texas Posts: 876	Tuckin' Rim I am looking at the Vision 256 at visionwheel.com. If i wanted to get the 17x9.5 rim for the rear of my truck, would 5.25 backspacing be enough to tuck it and drag frame? Thanks Jason __________________ 7DOS - 1972 C-10 350/350 Porterbuilt/Accuair 20x8.5/20x10 Ride Low or Die PSSST - Yes it's bagged. 7dos build thread: http://67-72chevytrucks.com/vboard/s...d.php?t=610290

03-05-2003, 06:00 PM	#2
Slammed67 Progress = 0% Join Date: Nov 2001 Location: Kansas City, MO Posts: 2,108	That is the back spacing I have on my 18x9.5's and they tuck. Just don't get too wide of a tire. I think mine are 285/40/18's. If I had gone with any wider of a tire, I probably would of had to go with 5.5" b.s. Right now I've got more clearance on the inner part of the tire that the outer. But you want to keep them as far out as possible to look good. Of course I'm not dragging frame (nor would I want to). But with it dropped on the c-notch, they fit just perfect. __________________ Jason - '67 GMC swb \| '57 Bel-Air 4dr hardtop \| '56 210 4dr Wagon \| 2000 GMC Sierra

03-05-2003, 09:10 PM	#4
RACING29 Registered User Join Date: Jul 2002 Location: Tennessee, Morristown Posts: 355	DRAG IT!!! __________________ 1967 Chevy truck, R1 racing seats, 4 point racing harness, 4/6 drop, primered blue, soon to be shaved, 350- 060. over, flat top pistons, Eagle rods, Edelbrock Aluminum heads, 1.5 Scorpion roller rockers, Lunati 515" cam, mallory ignition, Holley 750 double pumper carb, Built 350 turbo trans, 2500-2800 boss hog stall, 20 gallon aluminum fuel cell!!!

03-06-2003, 01:04 PM	#5
chevjayfsd Project 7dos Join Date: Aug 2001 Location: Abilene, Texas Posts: 876	Don't worry Longhorn, I am not planning on dragging it sitting or cruising i was just using that to let people I want to tuck the rims. Thanks Slammed for the info Thanks Jason __________________ 7DOS - 1972 C-10 350/350 Porterbuilt/Accuair 20x8.5/20x10 Ride Low or Die PSSST - Yes it's bagged. 7dos build thread: http://67-72chevytrucks.com/vboard/s...d.php?t=610290

03-05-2003, 08:01 PM	#3
crazy longhorn Fabricate till you "puke" Join Date: Jun 2002 Location: Ill Posts: 9,402	Layin the rails is cool when you are parked........but please tell us you dont plan to make sparks with that pretty truck!



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.